Wholesale China 4 Port 10/100/1000m Fiber Switch Quotes Manufacturer - 8 10/100/1000TX and 2 1000X SFP Slot | Managed Industrial Ethernet Switch JHA-MIGS28H – JHA
Wholesale China 4 Port 10/100/1000m Fiber Switch Quotes Manufacturer - 8 10/100/1000TX and 2 1000X SFP Slot | Managed Industrial Ethernet Switch JHA-MIGS28H – JHA Detail:
Features
♦ Support 2 1000Base-X SFP slot and 8 10/100/1000Base-T(X) Ethernet port.
♦ Support G.8032(ERPS), IEEE802.3, IEEE802.3u, IEEE802.3z, IEEE802.3x, IEEE802.3ad, IEEE802.3ab, IEEE802.1p, IEEE802.1x, IEEE802.1Q, IGMP Snooping, IPv4/IPv6 precedence.
♦ Support CLI, SNMP, WEB management, Console/Telnet command-line management and syslog, using self-developed ring network technology, recovery time <20ms.
♦ DC10-58V redundancy power, reverse polarity protection.
♦ Industrial grade 4 design, -40-85°C operating temperature.
♦ IP40 rated aluminum alloy housing, DIN-Rail mounted.
Introduction
JHA-MIGS28H is a high performance, cost-effective high-end managed industrial Ethernet switch. The switch provides 8 10/100/1000Base-T(X) Ethernet port and 2 1000Base-X SFP slot. The use of a Ring technology (network fault recovery <20ms) the user can easily set the redundant ring network to increase network reliability, it also support WEB, CLI, Telnet/serial console, Windows utility, and SNMP management of a variety of ways, rich QoS features for data traffic control and management, support ring protocol, RSTP and STP Ethernet redundancy support port-based VLAN, IEEE 802.1Q VLAN and GVRP protocol. The product also industrial design, and can be widely used in automotive PIS, CCTV, video surveillance systems, train control system, but also applies to any vibration shock, EMC compatibility requirements of harsh industrial applications, can meet a variety of industrial site requirements to achieve higher reliability.
Specification
Interface | |
Fiber Port | 2*100/1000Base-X SFP |
Ethernet Port | 8*10/100/1000 Base-T |
Manage Port | 1*RJ45 Console port |
Power connector | 3P Phoenix terminal, dual power supply redundancy |
LED Indicator | PWR (green);System indicator:SYS(green);
Network port indicator:yellow(1000 or POE) Green (Link) |
Cable type and distance | |
Twisted pair cable | 0-100m (CAT5e, CAT6) |
Single-mode fiber | 20/40/60/80/100KM |
Multimode fiber | 550m/2KM |
Optical fiber interface | LC/SC |
Network topology & scale | |
Ring topology | Support |
Star topology | Support |
Bus topology | Support |
Tree topology | Support |
Hybrid topology | Support |
Electrical characteristics | |
Input voltage | DC10-58V/AC 100-240V 50-60HZ |
Power consumption | Non-POE full load (Total power) <10WPOE full load <132W |
PoE Support(Optional) | |
PoE ports | 1-8 |
PoE protocol | 802.3af, 802.3at |
PoE pin assignment | 1,2,3,6 |
PoE management mode | Support |
L2 Features | |
Exchange capacity | 40G |
Packet forwarding rate | 14.9Mpps |
MAC address table | 16K |
VLAN support and quantity | Support 4K |
Report buffer | 8M |
Forwarding delay | <10us |
Port characteristics | Cross-connect and direct-adaptive |
Flow control | Support |
Jumbo frame support | Support10Kbytes |
Spanning Tree Protocol | Support STP/RSTP/MSTP |
Ring network protocol | Support ERPS |
Link aggregation | Support 12 groups |
Multicast | Support IGMP Snooping |
Port mirroring | Support |
Storm suppression | Support |
Port traffic statistics | Support |
Port flow system | Support |
QINQ | Support |
Protection |
Shell: IP40 protection, aluminum alloy housingIEC 61000-4-5 Level 3 (4KV/2KV) (8/20us)
IEC 61000-4-5 Level 3 (6KV/2KV) (10/700us) IEC 61000-4-3 Level 3 (10V/m) IEC 61000-4-4 Level 3 (1V/2V) IEC 61000-4-6 Level 3 (10V/m) IEC 61000-4-8 Level4 (30A/m) IEC 61000-4-11 Level3 (10V) EMI CLASS A IEC 61000-4-2 Level 4 (15KV/30KV) Free fall 0.5m |
Convergence Service | |
ACL | Support 500 ACLs;Support IP standard ACL;
Support MAC extended ACL; Support IP extended ACL; |
QoS | Support QoS re-marking and priority mapping;Support SP, WRR queue scheduling;
Support entry speed limit and exit speed limit; Support flow-based QoS |
Management function | |
Command line | Support |
Management serial port | Support |
Telnet | Support |
WEB management | Support |
SNMP | Support SNMPv1/v2c |
User management | Support |
System log | Support |
File upgrade | Support |
Firmware upgrade | Support |
SFP module DDM | Support |
Environmental conditions |
Working temperature | -40℃~+85℃ |
Storage/transport temperature | -40℃~+85℃ |
Relative humidity | 5%~95% does not support condensation (non-condensing) |
Cooling method | No fan design, natural heat dissipation |
MTBF | 100,000 hours |
Mechanical structure | |
Size | 181X146X47mm |
Installation method | DIN Rail Installation |
Weight | 1KG |
Dimension
Order Information
Model No. |
Description of Goods |
JHA-MIGS28H |
Managed Industrial Ethernet Switch, 2 1000Base-X SFP Slot and 8 10/100/1000Base-T(X), DIN-Rail, DC10-58V, -40-85°C Operating Temperature |
Power Supply: DC24V DIN-Rail Power Supply or Power Adapter is Optional. |
Product detail pictures:
Related Product Guide:
It is our responsibility to meet your needs and efficiently serve you. Your satisfaction is our satisfactory reward. We are looking forward to your visit for joint growth for Wholesale China 4 Port 10/100/1000m Fiber Switch Quotes Manufacturer - 8 10/100/1000TX and 2 1000X SFP Slot | Managed Industrial Ethernet Switch JHA-MIGS28H – JHA , The product will supply to all over the world, such as: Cyprus, USA, UK, Due to good quality and reasonable prices, our items have been exported to more than 10 countries and regions. We are looking forward to cooperating with all customers from at home and abroad. Moreover, customer satisfaction is our eternal pursuit.
By Frank from Singapore - 2017.01.28 18:53
We have worked with many companies, but this time is the ,detailed explanation, timely delivery and quality qualified, nice!
By Frances from Ukraine - 2018.12.22 12:52