Wholesale Aoc Optical Fiber Cable - 40G QSFP+ Active optical cable JHA-QSFP-40G-AOC – JHA

Short Description:

Overview

Feedback (2)

Download

We insist over the principle of development of 'High high quality, Performance, Sincerity and Down-to-earth working approach' to supply you with exceptional services of processing for 8 Ports Managed Industrial Switch Dc: 12-36v , Rs485 Converter , Epon Olt , If you are fascinated in any of our products, you should come to feel no cost to call us for more aspects. We hope to cooperate with a lot more close friends from all over the world.

Wholesale Aoc Optical Fiber Cable - 40G QSFP+ Active optical cable JHA-QSFP-40G-AOC – JHA Detail:

Features

◊ Support 40GBASE-SR4/QDR application

◊ Compliant to QSFP+ Electrical MSA SFF-8436

◊ Multi rate of up to 10.3125Gbps

◊ +3.3V single power supply

◊ Transmission distance up to 300m

◊ Low power consumption

◊ Operating case temp Commercial: 0°C to +70 °C

◊ UL certification cables (optional)

◊ RoHS compliant

Applications

◊ 40GBASE-SR4 at 10.3125Gbps per lane

◊ InfiniBand QDR

◊ Other optical links

Specification:

Absolute Maximum Ratings

Table 1- Absolute Maximum Ratings

Parameter	Symbol	Min.	Typical	Max.	Unit	Notes
Supply Voltage	Vcc₃	-0.5	-	+3.6	V
Storage Temperature	T_s	-10	-	+70	°C
Operating Humidity	RH	+5	-	+85	%	1

Note: 1 No condensation

Recommended Operating Conditions

Table 2- Recommended operating Conditions

Parameter	Symbol	Min.	Typical	Max.	Unit	Notes
Operating Case Temperature	T_C	0	-	+70	°C
Power Supply Voltage	Vcc	3.14	3.3	3.47	V
Power dissipation	Pd	-	-	1.5	w	1
Bit rate	BR	1.25	10.3125	-	Gbps

Note: 1 Per terminal

Electrical Characteristics

Table 3- Electrical Characteristics

Parameter		Symbol	Min.	Typ.	Max.	Units	Notes
ModSelL	Module Select	VOL	0	-	0.8	V
ModSelL	Module Unselect	VOH	2.5	-	VCC	V
LPMode	Low Power Mode	VIL	0	-	0.8	V
LPMode	Normal Operation	VIH	2.5	-	V_CC+0.3	V
ResetL	Reset	VIL	0	-	0.8	V
ResetL	Normal Operation	VIH	2.5	-	V_CC+0.3	V
ModPrsL	Normal Operation	VOL	0	-	0.4	V
IntL	Interrupt	VOL	0	-	0.4	V
IntL	Normal Operation	VoH	2.4	-	VCC	V
Electrical transmitter Characteristics
Differential Date Input Swing		Vout	200	-	1600	mV
Output Differential Impedance		Z_D	90	100	110	Ω
Electrical Receiver Characteristics
Differential Data Output Swing		Vin,P-P	350	-	800	mV_PP
Bit Error Rate		BER			E-12		1
Input Differential Impedance		ZIN	90	100	110	Ω

Note: 1 PRBS2^31-1@10.3125Gbps

Recommended Interface Circuit

Figure 1, Recommended Interface Circuit

Pin arrangement

Figure 2, Pin View

Table 4-Pin Function

Definitions

Pin	Symbol	Name/Description	Notes
1	GND	Ground	1
2	Tx2n	Transmitter Inverted Data Input
3	Tx2p	Transmitter Non-Inverted Data Input
4	GND	Ground	1
5	Tx4n	Transmitter Inverted Data Input
6	Tx4p	Transmitter Non-Inverted Data Input
7	GND	Ground	1
8	ModSelL	Module Select
9	ResetL	Module Reset
10	Vcc Rx	+3.3V Power Supply Receiver
11	SCL	2-wire serial interface clock
12	SDA	2-wire serial interface data
13	GND	Ground	1
14	Rx3p	Receiver Non-Inverted Data Output
15	Rx3n	Receiver Inverted Data Output
16	GND	Ground	1
17	Rx1p	Receiver Non-Inverted Data Output
18	Rx1n	Receiver Inverted Data Output
19	GND	Ground	1
20	GND	Ground	1
21	Rx2n	Receiver Inverted Data Output
22	Rx2p	Receiver Non-Inverted Data Output
23	GND	Ground	1
24	Rx4n	Receiver Inverted Data Output
25	Rx4p	Receiver Non-Inverted Data Output
26	GND	Ground	1
27	ModPrsL	Module Present
28	IntL	Interrupt
29	Vcc Tx	+3.3V Power supply transmitter
30	Vcc1	+3.3V Power supply
31	LPMode	Low Power Mode
32	GND	Ground	1
33	Tx3p	Transmitter Non-Inverted Data Input
34	Tx3n	Transmitter Inverted Data Input
35	GND	Ground	1
36	Tx1p	Transmitter Non-Inverted Data Input
37	Tx1n	Transmitter Inverted Data Input
38	GND	Ground	1

Note: 1. Circuit ground is internally isolated from chassis ground.

Monitoring Specification

Figure 3, Memory Map

Mechanical

Unit mm

Figure 4, Mechanical Diagram

Table 5- Cable

Length

Cable Length L（Unit: m）	Tolerant（Unit: cm）
≤1.0	+5/-0
1.0＜L≤4.5	+15/-0
4.5＜L≤14.5	+30/-0
＞14.5	+2%/-0

Warnings

Handling Precautions: This device is susceptible to damage as a result of electrostatic discharge (ESD).

A static free environment is highly recommended. Follow guidelines according to proper ESD procedures.

Laser Safety: Radiation emitted by laser devices can be dangerous to human eyes. Avoid eye exposure to direct or indirect radiation.

Product detail pictures:

Related Product Guide:

With this motto in mind, we have become one of technologically innovative, cost-efficient, and price-competitive manufacturers for Wholesale Aoc Optical Fiber Cable - 40G QSFP+ Active optical cable JHA-QSFP-40G-AOC – JHA , The product will supply to all over the world, such as: Denver, Peru, South Africa, Now we have a excellent team supplying specialist service, prompt reply, timely delivery, excellent quality and lower price to our customers. Satisfaction and good credit to every customer is our priority. We have been sincerely looking forward to cooperate with customers all over the world. We believe we can satisfy with you. We also warmly welcome customers to visit our company and purchase our solutions.

This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately， we successfully completed the procurement tasks.