PriceList for 10g Sfp+ Aoc Cable - 40G QSFP+ Active optical cable JHA-QSFP-40G-AOC – JHA

Short Description:

Overview

Feedback (2)

Download

Sticking for the belief of Creating items of front end of range and creating buddies with people today from all over the world, we normally put the interest of shoppers in the first place for 16 E1 To 4 Port Fast Ethernet Interface Converter , 16chs Poe Switcher , Ethernet Switch Sc , We welcome you to inquire us by call or mail and hope to build a successful and cooperative relationship.

PriceList for 10g Sfp+ Aoc Cable - 40G QSFP+ Active optical cable JHA-QSFP-40G-AOC – JHA Detail:

Features

◊ Support 40GBASE-SR4/QDR application

◊ Compliant to QSFP+ Electrical MSA SFF-8436

◊ Multi rate of up to 10.3125Gbps

◊ +3.3V single power supply

◊ Transmission distance up to 300m

◊ Low power consumption

◊ Operating case temp Commercial: 0°C to +70 °C

◊ UL certification cables (optional)

◊ RoHS compliant

Applications

◊ 40GBASE-SR4 at 10.3125Gbps per lane

◊ InfiniBand QDR

◊ Other optical links

Specification:

Absolute Maximum Ratings

Table 1- Absolute Maximum Ratings

Parameter	Symbol	Min.	Typical	Max.	Unit	Notes
Supply Voltage	Vcc₃	-0.5	-	+3.6	V
Storage Temperature	T_s	-10	-	+70	°C
Operating Humidity	RH	+5	-	+85	%	1

Note: 1 No condensation

Recommended Operating Conditions

Table 2- Recommended operating Conditions

Parameter	Symbol	Min.	Typical	Max.	Unit	Notes
Operating Case Temperature	T_C	0	-	+70	°C
Power Supply Voltage	Vcc	3.14	3.3	3.47	V
Power dissipation	Pd	-	-	1.5	w	1
Bit rate	BR	1.25	10.3125	-	Gbps

Note: 1 Per terminal

Electrical Characteristics

Table 3- Electrical Characteristics

Parameter		Symbol	Min.	Typ.	Max.	Units	Notes
ModSelL	Module Select	VOL	0	-	0.8	V
ModSelL	Module Unselect	VOH	2.5	-	VCC	V
LPMode	Low Power Mode	VIL	0	-	0.8	V
LPMode	Normal Operation	VIH	2.5	-	V_CC+0.3	V
ResetL	Reset	VIL	0	-	0.8	V
ResetL	Normal Operation	VIH	2.5	-	V_CC+0.3	V
ModPrsL	Normal Operation	VOL	0	-	0.4	V
IntL	Interrupt	VOL	0	-	0.4	V
IntL	Normal Operation	VoH	2.4	-	VCC	V
Electrical transmitter Characteristics
Differential Date Input Swing		Vout	200	-	1600	mV
Output Differential Impedance		Z_D	90	100	110	Ω
Electrical Receiver Characteristics
Differential Data Output Swing		Vin,P-P	350	-	800	mV_PP
Bit Error Rate		BER			E-12		1
Input Differential Impedance		ZIN	90	100	110	Ω

Note: 1 PRBS2^31-1@10.3125Gbps

Recommended Interface Circuit

Figure 1, Recommended Interface Circuit

Pin arrangement

Figure 2, Pin View

Table 4-Pin Function

Definitions

Pin	Symbol	Name/Description	Notes
1	GND	Ground	1
2	Tx2n	Transmitter Inverted Data Input
3	Tx2p	Transmitter Non-Inverted Data Input
4	GND	Ground	1
5	Tx4n	Transmitter Inverted Data Input
6	Tx4p	Transmitter Non-Inverted Data Input
7	GND	Ground	1
8	ModSelL	Module Select
9	ResetL	Module Reset
10	Vcc Rx	+3.3V Power Supply Receiver
11	SCL	2-wire serial interface clock
12	SDA	2-wire serial interface data
13	GND	Ground	1
14	Rx3p	Receiver Non-Inverted Data Output
15	Rx3n	Receiver Inverted Data Output
16	GND	Ground	1
17	Rx1p	Receiver Non-Inverted Data Output
18	Rx1n	Receiver Inverted Data Output
19	GND	Ground	1
20	GND	Ground	1
21	Rx2n	Receiver Inverted Data Output
22	Rx2p	Receiver Non-Inverted Data Output
23	GND	Ground	1
24	Rx4n	Receiver Inverted Data Output
25	Rx4p	Receiver Non-Inverted Data Output
26	GND	Ground	1
27	ModPrsL	Module Present
28	IntL	Interrupt
29	Vcc Tx	+3.3V Power supply transmitter
30	Vcc1	+3.3V Power supply
31	LPMode	Low Power Mode
32	GND	Ground	1
33	Tx3p	Transmitter Non-Inverted Data Input
34	Tx3n	Transmitter Inverted Data Input
35	GND	Ground	1
36	Tx1p	Transmitter Non-Inverted Data Input
37	Tx1n	Transmitter Inverted Data Input
38	GND	Ground	1

Note: 1. Circuit ground is internally isolated from chassis ground.

Monitoring Specification

Figure 3, Memory Map

Mechanical

Unit mm

Figure 4, Mechanical Diagram

Table 5- Cable

Length

Cable Length L（Unit: m）	Tolerant（Unit: cm）
≤1.0	+5/-0
1.0＜L≤4.5	+15/-0
4.5＜L≤14.5	+30/-0
＞14.5	+2%/-0

Warnings

Handling Precautions: This device is susceptible to damage as a result of electrostatic discharge (ESD).

A static free environment is highly recommended. Follow guidelines according to proper ESD procedures.

Laser Safety: Radiation emitted by laser devices can be dangerous to human eyes. Avoid eye exposure to direct or indirect radiation.

Product detail pictures:

Related Product Guide:

Our company aims to operating faithfully, serving to all of our customers , and working in new technology and new machine constantly for PriceList for 10g Sfp+ Aoc Cable - 40G QSFP+ Active optical cable JHA-QSFP-40G-AOC – JHA , The product will supply to all over the world, such as: Panama, Amman, Russia, We have been making our products for more than 20 years . Mainly do wholesale , so we have competitive price , but high quality. For the past years , we got very good feedbacks , not only because we provide good products , but also because of our good after-sale service . We are here waiting for you for your inquiry.

We always believe that the details decides the company's product quality, in this respect, the company conform our requirements and the goods are meet our expectations.

By Jean from Philippines - 2018.09.29 17:23

We are a small company that has just started, but we get the company leader's attention and gave us a lot of help. Hope we can make progress together!

By Jack from USA - 2017.06.29 18:55

Write your message here and send it to us