One of Hottest for Poe Ethernet Switch - 8 10/100/1000TX PoE/PoE+ and 2 1000X SFP Slot | Managed Industrial PoE Switch JHA-MIGS28HP – JHA
One of Hottest for Poe Ethernet Switch - 8 10/100/1000TX PoE/PoE+ and 2 1000X SFP Slot | Managed Industrial PoE Switch JHA-MIGS28HP – JHA Detail:
Features
♦ Support 8 10/100/1000Base-T(X) PoE/PoE+ port and 2 1000Base-X SFP slot.
♦ Support G.8032(ERPS), IEEE802.3, IEEE802.3u, IEEE802.3z, IEEE802.3x, IEEE802.3ad, IEEE802.3ab, IEEE802.3af/at, IEEE802.1p, IEEE802.1x, IEEE802.1Q, IGMP Snooping, IPv4/IPv6 precedence.
♦ Support CLI, SNMP, WEB management, Console/Telnet command-line management and syslog, using self-developed ring network technology, recovery time <20ms.
♦ DC48-58V redundancy power, reverse polarity protection.
♦ Support PoE/PoE+, IEEE802.3af: max 15.4W, IEEE802.3at: max 30W.
Introduction
JHA-MIGS28HP is a high performance, cost-effective high-end managed industrial PoE switch. The switch provides 8 10/100/1000Base-T(X) PoE/PoE+ port and 2 1000Base-X SFP slot. Each port has a PoE function, especially for difficult to provide AC power and wiring costs demanding application scenarios, automatically adapt to IEEE 802.3af/at standard.
The use of a Ring technology (network fault recovery <20ms) the user can easily set the redundant ring network to increase network reliability, it also support WEB, CLI, Telnet/serial console, Windows utility, and SNMP management of a variety of ways, rich QoS features for data traffic control and management, support ring protocol, RSTP and STP Ethernet redundancy support port-based VLAN, IEEE 802.1Q VLAN and GVRP protocol. The product also industrial design, and can be widely used in automotive PIS, CCTV, video surveillance systems, train control system, but also applies to any vibration shock, EMC compatibility requirements of harsh industrial applications, can meet a variety of industrial site requirements to achieve higher reliability.
Specification
Interface | |
Fiber Port | 2*100/1000Base-X SFP |
Ethernet Port | 8*10/100/1000 Base-T |
Manage Port | 1*RJ45 Console port |
Power connector | 3P Phoenix terminal, dual power supply redundancy |
LED Indicator | PWR (green);
System indicator:SYS(green); Network port indicator:yellow(1000 or POE) Green (Link) |
Cable type and distance | |
Twisted pair cable | 0-100m (CAT5e, CAT6) |
Single-mode fiber | 20/40/60/80/100KM |
Multimode fiber | 550m/2KM |
Optical fiber interface | LC/SC |
Network topology & scale | |
Ring topology | Support |
Star topology | Support |
Bus topology | Support |
Tree topology | Support |
Hybrid topology | Support |
Electrical characteristics | |
Input voltage | DC10-58V/AC 100-240V 50-60HZ |
Power consumption | Non-POE full load (Total power) <10W
POE full load <132W |
PoE Support(Optional) | |
PoE ports | 1-8 |
PoE protocol | 802.3af, 802.3at |
PoE pin assignment | 1,2,3,6 |
PoE management mode | Support |
L2 Features | |
Exchange capacity | 40G |
Packet forwarding rate | 14.9Mpps |
MAC address table | 16K |
VLAN support and quantity | Support 4K |
Report buffer | 8M |
Forwarding delay | <10us |
Port characteristics | Cross-connect and direct-adaptive |
Flow control | Support |
Jumbo frame support | Support10Kbytes |
Spanning Tree Protocol | Support STP/RSTP/MSTP |
Ring network protocol | Support ERPS |
Link aggregation | Support 12 groups |
Multicast | Support IGMP Snooping |
Port mirroring | Support |
Storm suppression | Support |
Port traffic statistics | Support |
Port flow system | Support |
QINQ | Support |
Protection |
Shell: IP40 protection, aluminum alloy housing
IEC 61000-4-5 Level 3 (4KV/2KV) (8/20us) IEC 61000-4-5 Level 3 (6KV/2KV) (10/700us) IEC 61000-4-3 Level 3 (10V/m) IEC 61000-4-4 Level 3 (1V/2V) IEC 61000-4-6 Level 3 (10V/m) IEC 61000-4-8 Level4 (30A/m) IEC 61000-4-11 Level3 (10V) EMI CLASS A IEC 61000-4-2 Level 4 (15KV/30KV) Free fall 0.5m |
Convergence Service | |
ACL | Support 500 ACLs;
Support IP standard ACL; Support MAC extended ACL; Support IP extended ACL; |
QoS | Support QoS re-marking and priority mapping;
Support SP, WRR queue scheduling; Support entry speed limit and exit speed limit; Support flow-based QoS |
Management function | |
Command line | Support |
Management serial port | Support |
Telnet | Support |
WEB management | Support |
SNMP | Support SNMPv1/v2c |
User management | Support |
System log | Support |
File upgrade | Support |
Firmware upgrade | Support |
SFP module DDM | Support |
Environmental conditions |
Working temperature | -40℃~+85℃ |
Storage/transport temperature | -40℃~+85℃ |
Relative humidity | 5%~95% does not support condensation (non-condensing) |
Cooling method | No fan design, natural heat dissipation |
MTBF | 100,000 hours |
Mechanical structure | |
Size | 181X146X47mm |
Installation method | DIN Rail Installation |
Weight | 1KG |
Dimension
Order Information
Model No. |
Description of Goods |
JHA-MIGS28HP |
Managed Industrial PoE Switch, 8 10/100/1000Base-T(X) PoE/PoE+ and 2 1000Base-X SFP Slot, DIN-Rail, DC48-58V, -40-85°C Operating Temperature |
Power Supply: DC48V DIN-Rail Power Supply or Power Adapter is Optional. |
Product detail pictures:
Related Product Guide:
We intention to see quality disfigurement within the creation and supply the ideal support to domestic and overseas buyers wholeheartedly for One of Hottest for Poe Ethernet Switch - 8 10/100/1000TX PoE/PoE+ and 2 1000X SFP Slot | Managed Industrial PoE Switch JHA-MIGS28HP – JHA , The product will supply to all over the world, such as: Brasilia, Bulgaria, Seattle, By adhering to the principle of human oriented, winning by quality, our company sincerely welcomes merchants from at home and abroad to visit us, talk business with us and jointly create a brilliant future.
By Martin Tesch from Qatar - 2017.08.15 12:36
It is really lucky to meet such a good supplier, this is our satisfied cooperation, I think we will work again!
By Christine from Ghana - 2017.06.29 18:55