OEM/ODM Supplier Pdh Modem - 8E1+4FE(Physical isolation) JHA-CPE8WF4 PDH Fiber Multiplexer – JHA

Short Description:


Overview

Related Video

Feedback (2)

Download

We constantly believe that one's character decides products' high quality, the details decides products' high-quality ,together with the REALISTIC,EFFICIENT AND INNOVATIVE crew spirit for 10g Sfp Module , Wall Switches , Optical Switch , We believe that in good quality more than quantity. Before export of the hair there is strict high quality control check during treatment as per international good quality standards.
OEM/ODM Supplier Pdh Modem - 8E1+4FE(Physical isolation) JHA-CPE8WF4 PDH Fiber Multiplexer – JHA Detail:

8E1+4FE(Physical isolation) JHA-CPE8WF4

PDH Fiber Multiplexer

Overview

This series of equipment is the company developed the PDH fiber transmission dedicated VLSI developed on the basis of point to point optical transmission equipment. Provide 1-8 E1 interfaces, primary and backup fiber optical interface connector, 1-4 physical isolation 10/100M Fast Ethernet interface (independent four-wire speed 100M,total bandwidth is 4*100M), as well as two business expansion interface. 2 Extended service interface can be used as RS232 / RS485 / RS422 asynchronous data , the application is very flexible. Optional one digital service telephone, the application is very flexible. With a sound alarm function, the whole stable, reliable, low power consumption, high integration, small size.

Product Photo

22 (1)

Features

  • Based on self-copyright IC
  • 1-4 physical isolation 10/100M Fast Ethernet interface , every FE Ethernet independent wire speed is 100M,total bandwidth is 4*100M;
  • Provide Console manage interface (RS232)
  • Provide two fiber interface 1+1 protectAPSfunction
  • Ethernet interface rate is 10/100M, half/full duplex Auto-Nego
  • Ethernet package support jumbo frames,up to 10240 byte
  • E1 interface comply with G.703, adopts digital clock recovery and smooth phase-lock technology
  • Uses standard 2 wire telephone (non-telephone handles) set as engineering order-wire hotline(optional)
  • When optical lose signal, it can detect the remote device is power off or fiber is disconnected, and indicates alarm by LED
  • The local device can view the remote device working condition
  • Provide command the remote interface Loop Back, support local E1 Loop Back function, support E1 LOS and AIS alarm ,ease line maintenance
  • The transmission distance is up to 2-100Km without interruption
  • Support SNMP manager (SNMP agent inside)
  • AC 220V, DC-48V, DC24V can be optional
  • DC-48V/DC24V power supply polarity detection function, Polarity-Free

Parameters

♦ Fiber

Multi-mode Fiber

50/125um, 62.5/125um,

Maximum transmission distance: 5Km @ 62.5 / 125um single mode fiber,attenuation (3dbm/km)

Wave Length: 820nm

Transmitting power: -12dBm (Min) ~-9dBm (Max)

Receiver sensitivity: -28dBm (Min)

Link budget: 16dBm

Single-mode Fiber

8/125um, 9/125um

Maximum transmission distance: 40Km

Transmission distance: 40Km @ 9 / 125um single mode fiber, attenuation (0.35dbm/km)

Wave Length: 1310nm

Transmitting power: -9dBm (Min) ~-8dBm (Max)

Receiver sensitivity: -27dBm (Min)

Link budget: 18dBm

 

E1 Interface

  Interface Standard: comply with protocol G.703;
 Interface Rate: 2048Kbps±50ppm;
 Interface Code: HDB3;

 E1 Impedance: 75Ω (unbalance), 120Ω (balance);

 Jitter tolerance: In accord with protocol G.742 and G.823

 Allowed Attenuation: 0~6dBm

♦ Ethernet interface (10/100M)

    Interface rate:    10/100 Mbps, half/full duplex auto-negotiation

   Interface Standard:    Compatible with IEEE 802.3, IEEE 802.1Q (VLAN)

   MAC Address Capability: 4096

   Connector: RJ45, support Auto-MDIX

♦ Working environment

Working temperature: -10°C ~ 50°C

Working Humidity: 5%~95 % (no condensation)

Storage temperature: -40°C ~ 80°C

Storage Humidity: 5%~95 % (no condensation)

Specifications

Model Model Number: JHA-CPE8WF4
Functional Description 8E1 PDH4 * Ethernet physical isolationtotal Band width 4*100M),order wire phone19”inch 1Uwith Console , SNMP1+1 Back up Optic fiber
Port Description 1+1 optical port, 8*E1 interfaces (75/120ohms), 4 FE interfaces,1*RS232 Console interface,1*SNMP Ethernet interface, one engineering order-wire telephone interface
Power Power supply: AC180V ~ 260VDC –48VDC +24V

Power consumption: ≤10W

Dimension Product Size: 19 inch 1U   483X138X45mm(WXDXH)
Weight 3KG

Application

22 (2)


Product detail pictures:

OEM/ODM Supplier Pdh Modem - 8E1+4FE(Physical isolation) JHA-CPE8WF4 PDH Fiber Multiplexer – JHA detail pictures

OEM/ODM Supplier Pdh Modem - 8E1+4FE(Physical isolation) JHA-CPE8WF4 PDH Fiber Multiplexer – JHA detail pictures


Related Product Guide:

As a way to meet up with client's wants, all of our operations are strictly performed in line with our motto High Quality, Aggressive Price, Fast Service for OEM/ODM Supplier Pdh Modem - 8E1+4FE(Physical isolation) JHA-CPE8WF4 PDH Fiber Multiplexer – JHA , The product will supply to all over the world, such as: Paris, Durban, Atlanta, Our solutions are produced with high quality raw material. Every moment, we constantly improve the production programme. In order to ensure better quality and service, we now have been focusing on the production process. We have got high praise by partner. We are looking forward to establishing business relationship with you.

The company comply with the contract strict, a very reputable manufacturers, worthy a long-term cooperation.
5 Stars By Adelaide from Jamaica - 2017.03.28 12:22
This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately, we successfully completed the procurement tasks.
5 Stars By Meredith from Barcelona - 2018.06.03 10:17
Write your message here and send it to us