OEM/ODM China Sfp28-25g-Aoc5m - 25G SFP28 Active optical cable JHA-SFP28-25G-AOC – JHA
OEM/ODM China Sfp28-25g-Aoc5m - 25G SFP28 Active optical cable JHA-SFP28-25G-AOC – JHA Detail:
Features
◊ Electrical interface compliant to SFF-8431
◊ 850nm VCSEL laser and PIN photo-detector
◊ Maximum link length of 70m on OM3 MMF and 100m on OM4 MMF
◊ Digital diagnostics functions are available via the I2C interface
◊ Operating case temperature Commercial: 0°C to +70 °C
◊ +3.3V single power supply
◊ Power consumption less than 1W
◊ RoHS compliant
◊ Password protection for A0h and A2h
Applications
◊ 25GBASE-SR Ethernet
◊ Servers, switches, storage and host card adapters
Specification
Absolute Maximum Ratings
Table1- Absolute Maximum Ratings
Parameter | Symbol | Min. | Typical | Max. | Unit | Notes |
Supply Voltage | Vcc3 | -0.5 | - | +3.6 | V | |
Storage Temperature | Ts | -10 | - | +70 | °C | |
Operating Humidity | RH | +5 | - | +85 | % | 1 |
Note: 1 No condensation
Recommended Operating Conditions
Parameter | Symbol |
Min. |
Typical |
Max. |
Unit | Notes |
Operating Case Temperature | TC | 0 | - |
+70 |
°C | |
Power Supply Voltage | Vcc |
3.14 |
3.3 |
3.47 |
V | |
Power Supply Current | Icc | - | - |
300 |
mA | |
Power Dissipation | Pd | - | - |
1.0 |
W | |
Bit Rate | BR |
8.5 |
25.78125 | - | Gbps | |
Fiber Bend Radius | Rb | 3 | - | - | cm |
Table 2- Recommended operating Conditions
Electrical Characteristics
Table 3- Electrical Characteristics
Parameter | Symbol | Min. | Typ. |
Max. |
Units | Notes | ||||
Transmitter |
||||||||||
Differential Data Input Swing | Vin,P-P | 200 | - | 1600 | mVPP | |||||
Input Differential Impedance | ZIN | 90 | 100 | 110 | Ω | |||||
Tx_Fault | Normal Operation | VOL | 0 | - | 0.8 | V | ||||
Transmitter Fault | VOH | 2.0 | - | VCC | V | |||||
Tx_Disable | Normal Operation | VIL | 0 | - | 0.8 | V | ||||
Laser Disable | VIH | 2.0 | - | VCC+0.3 | V | |||||
Receiver | ||||||||||
Differential Date Output | Vout | 400 | - |
800 |
mV | |||||
Output Differential Impedance | ZD | 90 | 100 |
110 |
Ω | |||||
Rx_LOS | Normal Operation | VOL | 0 | - |
0.8 |
V | ||||
Lose Signal | VoH | 2.0 | - |
VCC |
V |
Optical Characteristics
Table 4-Optical Characteristics
Parameter | Symbol |
Unit |
Min | Typ | Max | Notes |
Optical transmitter Characteristics | ||||||
Bit Rate | BR |
Gbps |
8.5 | 25.78125 | - | |
Center Wavelength Range | λc |
nm |
820 | 850 | 880 | |
Average Launch powerTx_off | Poff |
dBm |
- | - | -45 | |
Launch Optical Power | P0 |
dBm |
-6.0 | 2.4 | 1 | |
Extinction Ratio | ER | dB | 2 | - | - | |
Spectral Width(RMS) | RMS |
nm |
- | - | 0.65 | |
Optical Receiver Characteristics | ||||||
Bit Rate | BR |
Gbps |
8.5 | 25.78125 | ||
Bit Error Rate | BER | - | - | E-12 | ||
Damage threshold | DT |
dBm |
3.4 | - | - |
Overload Input OpticalPower | PIN | dBm | 2.4 |
- |
- | 2 |
Center Wavelength Range | λc | nm | 820 |
- |
880 | |
Receiver Sensitivity inAverage Power | Sen | dBm | - |
- |
-5.2 | 3 |
Los Assert | LosA | dBm | -30 |
- |
- | |
Los De-Assert | LosD | dBm | - |
- |
-13 | |
Los Hysteresis | LosH | dB | 0.5 |
Note:
- Coupled into 50/125 MMF.
- Measured with PRBS 231-1 test pattern @25.78125Gbps.BER=E-12 3. BER=1×10-12; PRBS231-1@25.78125Gbps.
Recommended Host Board Power Supply Circuit
Figure 1, Recommended Host Board Power Supply Circuit
Recommended Interface Circuit
Figure 2, Recommended Interface Circuit
Pin arrangement
Figure 3, Pin View
Table 5-Pin Function
Definitions
Pin | Symbol | Name/Description | Notes |
1 | VEET | Module Transmitter Ground | 1 |
2 | TX_FAULT | Module Transmitter Fault | 2 |
3 | TX_DISABLE | Transmitter Disable; Turns off transmitter laser output | 3 |
4 | SDA | 2-Wire Serial Interface Data Line (MOD-DEF2) | |
5 | SCL | 2-Wire Serial Interface Clock (MOD-DEF1) | |
6 | MOD_ABS | Module Absent, connected to VEET or VEER in the module | 2 |
7 | RS0 | Rate Select 0, optionally controls SFP+ module receiver | 4 |
8 | RX_LOS | Receiver Loss of Signal Indication (In FC designated as Rx_LOS and in Ethernet designated as NOT Signal Detect) | 2 |
9 | RS1 | Rate Select 1, optionally controls SFP+ module transmitter | 4 |
10 | VEER | Module Receiver Ground | 1 |
11 | VEER | Module Receiver Ground | 1 |
12 | RD- | Receiver Inverted Data Output | |
13 | RD+ | Receiver Non-Inverted Data Output | |
14 | VEER | Module Receiver Ground | 1 |
15 | VCCR | Module Receiver 3.3 V Supply | |
16 | VCCT | Module Transmitter 3.3 V Supply | |
17 | VEET | Module Transmitter Ground | 1 |
18 | TD+ | Transmitter Non-Inverted Data Input | |
19 | TD- | Transmitter Inverted Data Input | |
20 | VEET | Module Transmitter Ground | 1 |
Note:
- The module ground pins are isolated from the module case.
- The pins shall be pulled up with 4.7K-10Kohms to a voltage between 3.14V and 3.46V on host board.
- The pin is pulled up to VCCT with a 4.7K-10KΩ resistor in the module.
- See SFF-8472 Rev12.2 Table 10-2.
Monitoring Specification
Figure 4, Memory Map
Mechanical Design Diagram
Table 5- Cable
Length
Cable Length L(Unit: m) | Tolerant(Unit: cm) |
≤1.0 | +5/-0 |
1.0<L≤4.5 | +15/-0 |
4.5<L≤14.5 | +30/-0 |
>14.5 | +2%/-0 |
Warnings
Handling Precautions: This device is susceptible to damage as a result of electrostatic discharge (ESD).
A static free environment is highly recommended. Follow guidelines according to proper ESD procedures.
Laser Safety: Radiation emitted by laser devices can be dangerous to human eyes. Avoid eye exposure to direct or indirect radiation.
Product detail pictures:
Related Product Guide:
Our goods are commonly recognized and reliable by consumers and may satisfy continually developing economic and social needs for OEM/ODM China Sfp28-25g-Aoc5m - 25G SFP28 Active optical cable JHA-SFP28-25G-AOC – JHA , The product will supply to all over the world, such as: panama, Kazakhstan, Muscat, We expect to provide products and services to more users in global aftermarket markets; we launched our global branding strategy by providing our excellent products all over the world by virtue of our well reputed partners letting global users keep pace with technology innovation and achievements with us.
By Ophelia from Victoria - 2018.05.15 10:52
The factory workers have rich industry knowledge and operational experience, we learned a lot in working with them,we are extremely grateful that we can encount a good company has excellent wokers.
By Michaelia from US - 2018.06.12 16:22