Combo interface is also called photoelectric multiplexing interface, which is composed of two Ethernet ports (one optical port and one electrical port)on the switch panel. The combo electrical port and its corresponding optical port are logically photoelectric multiplexed. The user can choose one of them according to the actual networking situation, but the two cannot work at the same time.

Simply speaking, the photoelectric multiplexing port is an interface that can be used as an electrical port or an optical port. The network port is the electrical port, and the optical module is connected to the optical fiber to be the optical port. However, the photoelectric multiplexing port cannot use the optical port after using the electrical port, and cannot use the electrical port after using the optical port.

JHA-SW4024MG-28VS 10Gigabit Managed Switches are standard third-layer non-blocking switch. Based on high-performance ASIC chip technology, the modular structure design, which have a capability of multilayer switching and wire-speed routing forwarding. Can be deployed in the metropolitan area network, and provides a few last 1 km technology to gather and core data exchange. At the same time, JHA-SW4024MG-28VS Switches provide a complete IPv4/IPv6 routing, including tunnel and IP multicast.The user can set all kinds of functions of switch through the Web, SNMP and so on. JHA-SW4024MG-28VS Switches support 2nd layer and 3rd layer VPN, DOS defense, static routing, RIP, OSPF, BGP, PIM-SM, PIM-DM, DVMRP, NAT, Qos, RSTP, MSTP, VLAN, Port Security, a storm suppression, ACL access control and other functions, which is very suitable for the aggregation application of large-scale network and the core application of medium and small-sized network