New Arrival China Rs232 To 485 Converter - E1-RS232/RS422/RS485 Converter JHA-CE1D1/R1/Q1 – JHA

JHA-CE1D1-R1-Q1E1-RS232/RS422/RS485 Converter JHA-CE1D1/R1/Q1

Overview

This interface converter is based on FPGA, providing 1Channel RS232/485/422 transmission on E1 interface. The product breaks through contradictions between traditional serial interface communication distance and communication rate, besides, it also can solve electromagnetic interference, ground ring interference and lightning damage. The device greatly improves reliability, security and confidentiality of data communication. It is widely used for various industrial control, process control and traffic control occasions, especially for Bank, and Power and other sectors and systems which have special requirements of electromagnetic interference environment. RS232/RS485/RS422 channel can transmit adaptable serial data asynchronously 512kbps baud rate.

Product Photo

Mini Type

Features

• Based on self -copyright IC
• Support 3 interfaces RS232,RS422,RS485, you can only use one, cannot use the three interfaces at the  same time
• Can automatically detect and control RS-485 data flow without handshake signals to control the flow  direction of data
• Have the ability to automatically detect the baud rate of serial port signal
• Automatically test the reason of the device matt is that the device is power off, or E1 line is broken. And then  indicate on the LED
• Provide 2 impedances: 75 Ohm unbalance and 120 Ohm balance;
• Support SNMP Network Management
• Serial channel can transmit adaptable serial data asynchronously 300 Kbps-921.6Kbps baud rate
• Serial data multiplexing in E1 support ITU-T R.111 jumping coding mode
• Serial port interface lightning-protection reached IEC61000-4-5 (8/20μS) DM(Differential Mode): 6KV,Impedance (2 Ohm),CM(Common Mode): 6KV, Impedance (2 Ohm) standard

Parameters

♦ E1 interface 

Interface Standard: comply with protocol G.703;

Interface Rate: 2048Kbps±50ppm;

Interface Code: HDB3;

Impedance: 75Ω (unbalance), 120Ω (balance);

Jitter tolerance: In accord with protocol G.742 and G.823

Allowed Attenuation: 0~6dBm

♦ Serial interface 

Standard

EIA/TIA-232 RS-232 (ITU-T V.28)

EIA/TIA-422 RS-422 (ITU-T V.11)

EIA/TIA-485 RS-485 (ISO/IEC8284)

Serial Interface

RS-422: TXD+, TXD-, RXD+, RXD-, Signal Ground

RS-485 4 wires: TXD+, TXD-, RXD+, RXD-, Signal Ground

RS-485 2 wires: Data+(Correspond TX+), Data-（Correspond TX-）, Signal Ground

RS-232: RXD, TXD, Signal Ground

♦ Working environment

Working temperature: -10°C ~ 50°C

Working Humidity: 5%~95 % (no condensation)

Storage temperature: -40°C ~ 80°C

Storage Humidity: 5%~95 % (no condensation)

Specifications

Application