Manufacturer of Layer 2 Network - 2 10/100/1000TX – 8 1000X SFP Slot | Fiber Ethernet Switch JHA-GS82 – JHA

Short Description:

Overview

Feedback (2)

Download

Our pursuit and firm aim should be to Always fulfill our buyer requirements. We carry on to produce and structure high quality excellent solutions for equally our aged and new consumers and accomplish a win-win prospect for our consumers as well as us for Active Optical Cable 3m , Fiber Optic Transceiver , Ethernet Equipment , All of the time, we have been paying attention on all information to insure each product or service glad by our customers.

Manufacturer of Layer 2 Network - 2 10/100/1000TX – 8 1000X SFP Slot | Fiber Ethernet Switch JHA-GS82 – JHA Detail:

10-port Gigabit Fiber Ethernet Switch, 8-port 1000Base-X SFP Slot and 2-Port 10/100/1000Base-T(X)

Introduction

JHA-GS82 is a gigabit Ethernet switches supports two types media for network connection and switching such as 10/100/1000Base-T and 1000Base-SX/LX. The switch is designed with a switch controller and buffer memory that connects two types segments to operate smoothly. The Switch with 8 SFP slot 1000Base-T/SX/LX and 2 RJ45 port 10/100/1000Base-T(selectable). The RJ45 port support Half or Full Duplex modes. All SFP ports support only 1000Mbps and Full-Duplex modes. With external power unit, it provides good stability and reliability.

Features

♦ Compliance with IEEE 802.3, IEEE 802.3u, IEEE 802.3X, IEEE 802.1Q, 10Base-TX, 100Base-TX, 1000Base-TX, 1000Base-FX standards.

♦ It supports TCP / IP, PPPOE, DHCP, ICMP, NAT protocol.

♦ Flow control: Full duplex using IEEE 802.3X, a standard half-duplex adopt Backpressure.

♦ Electrical ports support auto-negotiation function, automatically adjusts the transmission and transfer rates.

♦ Ports support Auto-MDI / MDIX auto-flip.

♦ Support store and forward mode.

♦ Supports 10M, 100M, 1000M mode or adaptive mode.

♦ Provide status indicators, external power supply (output 5V ~ 50Hz 2A).

♦ The card design, to facilitate future maintenance and inspection equipment.

♦ Modular power supply design, function board with separate power supply design, easy to post-maintenance.

♦ Unique IC solutions, the chip temperature low, to get rid of plus cooling system, flow control and reduce broadcast storms.

♦ High-quality integrated photovoltaic module provides good optical properties and electrical properties to ensure reliable transmission, long life.

♦ Operating Mechanism broadcast filtering, address auto-learning and auto-update feature and store and forward.

♦ It supports up to 1916 byte long data packet transmission.

♦ Missing link to provide remote diagnostics, electrical interface and optical port link link connection diagnostics, dynamic data transmission, full-duplex / half duplex, speed light, easy installation and later maintenance.

♦ Ultra-low power consumption of less than 2.5W (Input: AC110 ~ 260V), low heat, stable operation for a long time.

Dimension

Specification

Protocol Standard	IEEE802.3, IEEE802.3u, IEEE802.3z, IEEE802.1q, IEEE802.3ab, IEEE802.1p QoS,IEEE802.1d Spanning Tree
Wavelength	850nm/1310nm/1550nm
Transmission Distance	Cat5 100m Multimode, Single/Dual-fiber 550m Single Mode, Single-fiber 20/40/60/80/100Km Single Mode, Dual-fiber 20/40/60/80/100/120Km
Ethernet Port	RJ45 Ports, Connection STP / UTP Cat5/Cat5e Cooper Cable
Fiber Port	Multimode, Dual-fiber SC/ST/FC (Diameter 50/125, 62.5 / 125μm) Single Mode, Single Fiber, SC/ST/FC (Diameter 9/125μm ) Single Mode, Dual-fiber SC/FC (diameter 9/125μm )
Exchange Attribute	Conversion Method: Media conversion, store and forward / straight in MAC Add: 8 K Cache: 1 Mbit Full duplex state: flow control, half-duplex: backpressure mode Store and Forward: 9.6us, Straight In: 0.9us BER: <1/1000000000
LED Indicator	PWR( Power Supply ) FX LINK/ACT FDX ( Ethernet port full / half duplex mode ) TX LINK/ACT ( Ethernet port communication / action ) 1000 ( 1000/100/10M transmission rate ) FX ( Optical signal )
Power Supply	Power Input: DC5V 2A Full Load: <2.5 W
Working Environment	Operating Temperature: -20~70℃ Storage Temperature: -40~70℃ Storage Humidity: 5% to 90% non-condensing
Dimension	21510528mm ( L * W * H )
Certification	CE, FCC, RoHS
Warranty	3-years

Order Information

Model No.	Description of Goods
JHA-GS82	81000Base-X SFP Slot + 210/100/1000Base-T(X) RJ45 Port

Product detail pictures:

Related Product Guide:

Well-run devices, expert profits group, and better after-sales companies; We have been also a unified huge family, everybody keep on with the organization worth unification, determination, tolerance for Manufacturer of Layer 2 Network - 2 10/100/1000TX – 8 1000X SFP Slot | Fiber Ethernet Switch JHA-GS82 – JHA , The product will supply to all over the world, such as: Guatemala, Honduras, panama, Hard work to keep making progress, innovation in the industry, make every effort to high quality enterprise. We try our to build the scientific management model, to learn abundant experienced knowledge, to develop advanced production equipment and production process , to create the first-call quality goods, reasonable price , high quality of service , quick delivery , to present you create new value .

This company has a lot of ready-made options to choose and also could custom new program according to our demand, which is very nice to meet our needs.