Manufacturer for E1 To Fiber Interface Converter - 8E1+4GE PDH Fiber Multiplexer JHA-CPE8G4 – JHA

Short Description:

Overview

Feedback (2)

Download

Based on domestic market and expand overseas business is our development strategy for Full Gigabit Poe Switch , 100g Qsfp28 Aoc , 40g Qsfp+ Active Optical Cable , Our merchandise delight in excellent popularity among our buyers. We welcome consumers, business enterprise associations and good friends from all components with the globe to make contact with us and seek out cooperation for mutual rewards.

Manufacturer for E1 To Fiber Interface Converter - 8E1+4GE PDH Fiber Multiplexer JHA-CPE8G4 – JHA Detail:

8E1+4GE PDH Fiber Multiplexer JHA-CPE8G4

Overview

This device is the point-to-point optical transmission device developed on the basis of VLSI. The device provides 1-8*E1 interface, 1-4*10/100/1000M Ethernet interface (Wire Speed 1000M) and 2 expansion interfaces. 4* Ethernet interface is switch interface, can support VLAN. 1 expansion interface can be used as the transmission channel of RS232/RS485/RS422 asynchronous data, dry contact signal, 1Channel digital business phone can be optional. It is very flexible. It has alarm function. The work is reliable, stable, and low power consumption, high integration, small size.

Product Photo

Features

Based on self -copyright IC
The Fiber bandwidth is up to 1.5G, Ethernet bandwidth is Wire Speed 1000M
Ethernet interface rate is 10/100/1000M, half/full duplex Auto-Nego
4*Ethernet interface is switch interface, support VLAN, can set to 4 channel logical isolation
Provide Console manage interface (RS232)
Provide two fiber interface 1+1 protect（APS）function
E1 interface comply with G.703, adopts digital clock recovery and smooth phase-lock technology
Uses standard 2 wire telephone (non-telephone handles) set as engineering order-wire hotline(optional)
When optical lose signal, it can detect the remote device is power off or fiber is disconnected, and indicates alarm by LED
The local device can view the remote device working condition
Provide 2 expansion interface, you can extend 1~2Channel asynchronous data, such as RS232/RS485/RS422/Manchester code;
Provide command the remote interface Loop Back, support local E1 Loop Back function, support E1 LOS and AIS alarm ,ease line maintenance
The transmission distance is up to 2-100Km without interruption
Support SNMP manager (SNMP agent inside)
AC 220V, DC-48V, DC24V can be optional
DC-48V/DC24V power supply polarity detection function, Polarity-Free

Parameters

♦ Fiber

Multi-mode Fiber

50/125um, 62.5/125um,

Maximum transmission distance: 5Km @ 62.5 / 125um single mode fiber,attenuation (3dbm/km)

Wave Length: 820nm

Transmitting power: -12dBm (Min) ~-9dBm (Max)

Receiver sensitivity: -28dBm (Min)

Link budget: 16dBm

Single-mode Fiber

8/125um, 9/125um

Maximum transmission distance: 40Km

Transmission distance: 40Km @ 9 / 125um single mode fiber, attenuation (0.35dbm/km)

Wave Length: 1310nm

Transmitting power: -9dBm (Min) ~-8dBm (Max)

Receiver sensitivity: -27dBm (Min)

Link budget: 18dBm

♦ E1 Interface

Interface Standard: comply with protocol G.703;
Interface Rate: 2048Kbps±50ppm;
Interface Code: HDB3;

E1 Impedance: 75Ω (unbalance), 120Ω (balance);

Jitter tolerance: In accord with protocol G.742 and G.823

Allowed Attenuation: 0~6dBm

♦ Gigabit Ethernet Interface (10/100/1000M)

Interface rate: 10/100/1000M, half/full duplex auto-negotiation

Interface Standard: Compatible with IEEE 802.3, IEEE 802.1Q (VLAN)

MAC Address Capability:4096

Connector: RJ45, support Auto-MDIX

♦ Working environment

Working temperature: -10°C ~ 50°C

Working Humidity: 5%~95 % (no condensation)

Storage temperature: -40°C ~ 80°C

Storage Humidity: 5%~95 % (no condensation)

Specifications

Model	Model Number:JHA-CPE8G4
Functional Description	8E1+4GE PDH，order wire phone，19”inch 1U，（Standard telephone interface, non-telephone handles）Console，1+1 Back up Optic fiber
Port Description	One optical port, 8E1 interfaces (75/120 ohms), 4GE interfaces,1RS232 Console interface,1SNMP Ethernet interface, one engineering order-wire telephone interface
Power	Power supply: AC180V ~ 260V；DC –48V；DC +24V Power consumption: ≤10W
Dimension	Product Size: 19 inch 1U 483X138X45mm(WXDXH)
Weight	3KG

Application

Product detail pictures:

Related Product Guide:

We keep on with the basic principle of quality to start with, support very first, continuous improvement and innovation to meet the customers for your management and zero defect, zero complaints as the quality objective. To great our service, we offer the items with all the superior high quality at the reasonable selling price for Manufacturer for E1 To Fiber Interface Converter - 8E1+4GE PDH Fiber Multiplexer JHA-CPE8G4 – JHA , The product will supply to all over the world, such as: Boston, Amsterdam, Stuttgart, We also have good cooperation relationships with many good manufacturers so that we can provide al all of auto parts and after-sales service with high quality standard,lower price level and warmly service to meet demands of customers from different fields and different area.