Manufacturer for Audio Optical Converter - Fiber-32Voice +2FE Multiplexer JHA-P32FE02 – JHA

Short Description:


Overview

Related Video

Feedback (2)

Download

Well-run equipment, specialist income crew, and better after-sales services; We're also a unified major family, anyone stay with the organization value unification, determination, tolerance for Manageable Network Switch , Network Switch Case Ip Camera In Cctv Field , Usb To Rs232 Converter , We can easily offer you by far aggressive prices and good quality, because we've been much additional Specialist! So please will not hesitate to call us.
Manufacturer for Audio Optical Converter - Fiber-32Voice +2FE Multiplexer JHA-P32FE02 – JHA Detail:

Fiber-32Voice +2FE Multiplexer JHA-P32FE02

Overview

  This device provides 1-32Channel telephone, 2Channel 10M/100M Ethernet interface (Wire Speed 100M),2Channel Ethernet interface is switch interface, can support VLAN.

Photo 

ii (1) 

19 Inch Type

Features

  • Based on self -copyright IC
  • Voice port supports FXO and FXS port,Support FXO/FXS, Magnet telephone Interface, FXO port docking with program-controlled switchboard, FXS port connected to the user’s telephone;
  • 1~32channel Voice access, Voice FXO / FXS interface, support for caller ID / reverse polarity billing / fax function;
  • Support various sites mutual number allocation function
  • Ethernet interface supports10/100M, half/full duplex auto- adaptable, support VLAN
  • Ethernet interface can support AUTO-MDIX (crossed line and straightly connected line self-adaptable)
  • Telephone interface with lightning protection, lightning reached IEC61000-4-5 Short circuit current wave 8 / 20μs, the peak output voltage 6KV open standards.
  • The transmission distance is up to 2-120Km without interruption
  • AC 220V, DC-48V, DC24V can be optional

Parameters

♦  Fiber

Multi-mode Fiber

50/125um, 62.5/125um,

Maximum transmission distance:          5Km @ 62.5 / 125um single mode fiber, attenuation (3dbm/km)

Wave Length:                                                820nm

Transmitting power:                               -12dBm (Min) ~-9dBm (Max)

Receiver sensitivity:                               -28dBm (Min)

Link budget:                                           16dBm

Single-mode Fiber

8/125um, 9/125um

Maximum transmission distance:          40Km

Transmission distance:                                  40Km @ 9 / 125um single mode fiber, attenuation (0.35dbm/km)

Wave Length:                                                1310nm

Transmitting power:                               -9dBm (Min) ~-8dBm (Max)

Receiver sensitivity:                               -27dBm (Min)

Link budget:                                           18dBm

♦  E1 Interface

  Interface Standard:          comply with protocol G.703;
 Interface Rate:                     n*64Kbps±50ppm;
 Interface Code:                HDB3;

 E1 Impedance:                 75Ω (unbalance), 120Ω (balance);

 Jitter tolerance:                 In accord with protocol G.742 and G.823

 Allowed Attenuation:           0~6dBm

♦  Ethernet interface(10/100M)

Interface rate:                           10/100 Mbps, half/full duplex auto-negotiation

Interface Standard:               Compatible with IEEE 802.3, IEEE 802.1Q (VLAN)

MAC Address Capability: 4096

Connector:                             RJ45, support Auto-MDIX

♦  FXS Phone Interface

Ring voltage:                                   75V

Ring frequency:                        25HZ

Two-line Impedance:               600 Ohm (pick up)

Return loss:                              40 dB

♦  FXO Switch Interface

Ring detect voltage:                 35V

Ring detection frequency:    17HZ-60HZ 

Two-line Impedance:               600 Ohm (pick up)

Return loss:                              40 dB

Return loss:                         20 dB

♦  Working environment

Working temperature:                 -10°C ~ 50°C

Working Humidity:                    5%~95 % (no condensation)

Storage temperature:           -40°C ~ 80°C

Storage Humidity:                      5%~95 % (no condensation)

Specifications

Model Fiber-32Voice +2FE Multiplexer JHA-P32FE02
Functional Description 32 * telephone,2*100 Mbps Ethernet,1* Fiber interface
Power Power supply: AC180V ~ 260V;DC –48V;DC +24VPower consumption: ≤10W
Dimension Product Size:   485X138X45mm(WXDXH) 19 1U
Weight 2.4KG

Application

 

ii (2)


Product detail pictures:

Manufacturer for Audio Optical Converter - Fiber-32Voice +2FE Multiplexer JHA-P32FE02 – JHA detail pictures

Manufacturer for Audio Optical Converter - Fiber-32Voice +2FE Multiplexer JHA-P32FE02 – JHA detail pictures


Related Product Guide:

Our eternal pursuits are the attitude of regard the market, regard the custom, regard the science and the theory of quality the basic, belief the very first and management the advanced for Manufacturer for Audio Optical Converter - Fiber-32Voice +2FE Multiplexer JHA-P32FE02 – JHA , The product will supply to all over the world, such as: Honduras, Austria, Ghana, Profession, Devoting are always fundamental to our mission. We have always been in line with serving customers, creating value management objectives and adhering to the sincerity, dedication, persistent management idea.

The accounts manager made a detailed introduction about the product, so that we have a comprehensive understanding of the product, and ultimately we decided to cooperate.
5 Stars By Karen from Romania - 2018.12.11 11:26
This is a very professional wholesaler, we always come to their company for procurement, good quality and cheap.
5 Stars By Julia from Los Angeles - 2018.06.19 10:42
Write your message here and send it to us