High reputation Active Optical Cable - 25G SFP28 Direct Attach Cable (DAC) JHA-SFP28-25G-PCU – JHA

Short Description:

Overview

Feedback (2)

Download

With a complete scientific quality management system, good quality and good faith, we win good reputation and occupied this field for Manageable Network Switch Ce/Fcc/Rohs Certification , 8e1 Voice Over Fiber Pcm Mux , Serial To E1 Converter , Your support is our eternal power! Warmly welcome customers at home and abroad to visit our company.

High reputation Active Optical Cable - 25G SFP28 Direct Attach Cable (DAC) JHA-SFP28-25G-PCU – JHA Detail:

General Description

SFP28 Direct Attach Cables are compliant with SFF-8432 and SFF-8402 specifications. Various choices of wire gauge are available from 30 to 26 AWG with various choices of cable length (up to 5m).

The SFP28 passive cable assemblies are high performance, cost effective I/O solutions for 25G Ethernet. SFP28 copper cables allow hardware manufactures to achieve high port density, configurability and utilization at a very low cost and reduced power budget.

Features

◊ Up to 25.78125 Gbps data rate

◊ Up to 5 meter transmission

◊ Hot-pluggable SFP 20PIN footprint

◊ Improved Pluggable Form Factor(IPF) compliant for enhanced EMI/EMC performance

◊ Compatible to SFP28 MSA

◊ Compatible to SFF-8402 and SFF-8432

◊ Temperature Range: 0~ 70 °C

◊ RoHS Compatible

Benefits

◊ Cost-effective copper solution

◊ Lowest total system power solution

◊ Lowest total system EMI solution

◊ Optimized design for Signal Integrity

Applications

◊ 25G Ethernet

High Speed Characteristics

Parameter	Symbol	Min	Typical	Max	Unit	Note
Differential Impedance	RIN,P-P	90	100	110	Ώ
Insertion loss	SDD21	8		22.48	dB	At 12.8906 GHz
Differential Return Loss	SDD11	12.45		See 1	dB	At 0.05 to 4.1 GHz
Differential Return Loss	SDD22	3.12		See 2	dB	At 4.1 to 19 GHz
	SDD22	3.12		See 2	dB	At 4.1 to 19 GHz
Common-mode to	SCC11				dB
common-mode	SCC11	2				At 0.2 to 19 GHz
common-mode	SCC22	2				At 0.2 to 19 GHz
output return loss	SCC22
output return loss
Differential to common-mode	SCD11	12		See 3	dB	At 0.01 to 12.89 GHz
Differential to common-mode	SCD11
return loss	SCD22	10.58		See 4		At 12.89 to 19 GHz
return loss	SCD22	10.58		See 4		At 12.89 to 19 GHz

		10				At 0.01 to 12.89 GHz
Differential to common Mode	SCD21-IL			See 5	dB	At 12.89 to 15.7 GHz
Conversion Loss	SCD21-IL			See 5	dB	At 12.89 to 15.7 GHz
		6.3				At 15.7 to 19 GHz
Channel Operating Margin	COM	3			dB

Pin Descriptions

SFP28 Pin Function Definition

Pin		Logic	Symbol		Name/Description	Notes
1			VeeT		Transmitter Ground
2		LV-TTL-O	TX_Fault		N/A	1
3		LV-TTL-I	TX_DIS		Transmitter Disable	2
4		LV-TTL-I/O	SDA		Tow Wire Serial Data
5		LV-TTL-I	SCL		Tow Wire Serial Clock
6			MOD_DEF0		Module present, connect to VeeT
7		LV-TTL-I	RS0		N/A	1
8		LV-TTL-O	LOS		LOS of Signal	2
9		LV-TTL-I	RS1		N/A	1
10			VeeR		Reciever Ground
11			VeeR		Reciever Ground
12		CML-O	RD-		Reciever Data Inverted
13		CML-O	RD+		Reciever Data Non-Inverted
14			VeeR		Reciever Ground
15			VccR		Reciever Supply 3.3V
16			VccT		Transmitter Supply 3.3V
17			VeeT		Transmitter Ground
	18	CML-I	TD+		Transmitter Data Non-Inverted
	19	CML_I	TD-		Transmitter Data Inverted
	20		VeeT		Transmitter Ground
1.	Signals not supported in SFP+ Copper pulled-downto VeeT with 30K ohms resistor
2.	Passive cable assemblies do not support			LOS and TX_DIS

Mechanical Specifications

The connector is compatible with the SFF-8432 specification.

Length (m)	Cable AWG
1	30
2	30
3	30/26
4	26
5	26

Regulatory Compliance

Feature	Test Method	Performance
Electrostatic Discharge (ESD) to the Electrical Pins	MIL-STD-883C Method 3015.7	Class 1(>2000 Volts)
Electromagnetic Interference(EMI)	FCC Class B	Compliant with Standards
	CENELEC EN55022 Class B
	CISPR22 ITE Class B
RF Immunity(RFI)	IEC61000-4-3	Typically Show no Measurable Effect from a 10V/m Field Swept from 80 to 1000MHz
RoHS Compliance	RoHS Directive 2011/65/EU and it’s Amendment Directives 6/6	RoHS 6/6 compliant

Product detail pictures:

Related Product Guide:

Our company insists all along the quality policy of product quality is base of enterprise survival; customer satisfaction is the staring point and ending of an enterprise; persistent improvement is eternal pursuit of staff and the consistent purpose of reputation first, customer first for High reputation Active Optical Cable - 25G SFP28 Direct Attach Cable (DAC) JHA-SFP28-25G-PCU – JHA , The product will supply to all over the world, such as: Bogota, moldova, South Africa, With the goal of zero defect. To care for the environment, and social returns, care employee social responsibility as own duty. We welcome friends from all over the world to visit and guide us so that we can achieve the win-win goal together.