High Quality for E1 Conversion V24 - Framed E1-FE interface Converter JHA-CE1fF1 – JHA

Short Description:


Overview

Related Video

Feedback (2)

Download

Good quality comes to start with; service is fore; organization is cooperation is our enterprise philosophy which is regularly observed and pursued by our firm for 10g Sfp+ To Sfp+ Active Optical Cable , Layer 2 Fiber Ethernet Switch , Power Over Ethernet , Within our initiatives, we already have many shops in China and our solutions have won praise from prospects around the globe. Welcome new and outdated consumers to call us for that upcoming long term small business associations.
High Quality for E1 Conversion V24 - Framed E1-FE interface Converter JHA-CE1fF1 – JHA Detail:

Framed E1-FE interface Converter JHA-CE1fF1

Overview

This interface converter is based on FPGA,providing one framed E1 interface and one Ethernet interface to achieve 10/100Base-T Ethernet data transmission on the E1 channel. It is a high performance, self-learning Ethernet bridge. This device is the extension device of Ethernet, using network (PDH/SDH/Microwave) that provide E1 channel to achieve local and remote Ethernet interconnecting with serial interfaces at a lower cost. The device has inter-set loop test function to facilitate the project launching and daily maintenance.

Product Photo

 342 (1)

Mini  Type

Features

  • Based on self -copyright  IC 
  • Can realize monitor and control of remote equipment, OAM management data did not  take up user’s timeslot and save E1 bandwidth
  • E1 supports any timeslot set, the rate is 64K-2048K
  • The local device can forced the remote device rate follow it
  • Have the function of E1 interface loop back check, avoid the converter crashed because of interface loop return;
  • Have indicator  when the device is power-off or E1 line is broken or lose signal;
  • Can set the E1 line that not to send the LINK signal to Ethernet interface while E1 line is broken;
  • The Ethernet interface supports jumbo frames (2036 Bytes);
  • Inter-set dynamic Ethernet MAC address (4,096) with local data frame filtering 
  • Ethernet interface supports10M/100M, half/full duplex auto- Negotination and AUTO-MDIX(crossed line and straightly connected line self-adaptable );
  • Have Ethernet monitor self-reset function, the equipment will not dead
  • Can achieve the remote device setting any 5 mode of Ethernet and can closed the AUTO-MDIX function; 
  • Provide 2 clock types: E1 master clock and E1 line clock;
  • Have three Loop Back Mode: E1 interface Loop Back (ANA)Ethernet interface Loop Back(DIG)Command the remote
  • Ethernet interface Loop Back(REM) 
  • Provide 2 impedances: 75 Ohm unbalance and 120 Ohm balance;
  • Support SNMP Network Management;
  • Can realize monitor of remote equipment temperature and voltage from local equipment;  
  • Can form the structure: Ethernet E1 Bridge(A)---E1 Optical Fiber Modem(B)---Ethernet Optical Fiber Modem (C) 
  • Can form the structure: Ethernet E1 Bridge(A)---Optical Ethernet E1 Bridge (B)---Ethernet Optical Fiber Transceiver (C), can manage (B) and (C) at (A)

Parameters

♦ E1 Interface

Interface Standard: comply with protocol G.703;
Interface Rate: n*64Kbps±50ppm;
Interface Code: HDB3;

E1 Impedance: 75Ω (unbalance), 120Ω (balance);

Jitter tolerance: In accord with protocol G.742 and G.823

Allowed Attenuation: 0~6dBm

♦ Ethernet interface(10/100M)

Interface rate: 10/100 Mbps, half/full duplex auto-negotiation

Interface Standard:     Compatible with IEEE 802.3, IEEE 802.1Q (VLAN)

MAC Address Capability: 4096

Connector:     RJ45, support Auto-MDIX

♦ Working environment

Working temperature:    -10°C ~ 50°C

Working Humidity:     5%~95 % (no condensation)

Storage temperature: -40°C ~ 80°C

Storage Humidity: 5%~95 % (no condensation)

Specifications

Model Model Number:JHA-CE1fF1
Functional Description 1channel framed E1 – FE converter N * 64k rate setting With E1 loopback detection function
Port Description One E1 interface1*FE Interface
Power Power supply: AC180V ~ 260VDC –48VDC +24VPower consumption: ≤10W
Dimension Product Size:  216X140X31mm (WXDXH)
Weight 1.1KG/piece

Application

Typical solution 1

342 (2) 342 (3) 342 (4)

Typical solution 2

342 (3)

Typical solution 3

342 (2)


Product detail pictures:

High Quality for E1 Conversion V24 - Framed E1-FE interface Converter JHA-CE1fF1 – JHA detail pictures

High Quality for E1 Conversion V24 - Framed E1-FE interface Converter JHA-CE1fF1 – JHA detail pictures


Related Product Guide:

We thinks what prospects think, the urgency of urgency to act from the interests of a client position of theory, allowing for greater high-quality, reduced processing costs, rates are much more reasonable, won the new and previous consumers the support and affirmation for High Quality for E1 Conversion V24 - Framed E1-FE interface Converter JHA-CE1fF1 – JHA , The product will supply to all over the world, such as: Buenos Aires, Lithuania, Sri Lanka, With all these supports, we can serve every customer with quality product and timely shipping with highly responsibility. Being a young growing company, we might not the , but we're trying our to be your good partner.

The accounts manager made a detailed introduction about the product, so that we have a comprehensive understanding of the product, and ultimately we decided to cooperate.
5 Stars By Lindsay from Amman - 2017.11.12 12:31
The sales person is professional and responsible, warm and polite, we had a pleasant conversation and no language barriers on communication.
5 Stars By Jean from Colombia - 2018.11.22 12:28
Write your message here and send it to us