High Quality for E1 Conversion V24 - 8E1-4FE interface Converter JHA-CE8F4 (Logical lsolation) – JHA

Short Description:


Overview

Related Video

Feedback (2)

Download

Sticking to the perception of Creating products of front end of range and earning mates with people today from all over the world, we constantly put the desire of consumers in the first place for Dual Fiber Media Converter , Optical Fiber Swith , Sfp Fiber Switch , Sincere cooperation with you, altogether will create happy tomorrow!
High Quality for E1 Conversion V24 - 8E1-4FE interface Converter JHA-CE8F4 (Logical lsolation) – JHA Detail:

8E1-4FE interface Converter JHA-CE8F4

(Logical lsolation)

Overview

This interface converter is based on FPGA, using reverse direction multiplexing technology to bundle for multiple E1 circuits to transmit the Ethernet data of 4Channel 100BASE-TX. It can realize 1~8E1 channel to convert between Ethernet optical interface. This device can transmit the transceiver signal point to point to Ethernet optical interface to make E1 channels interconnected with Ethernet optical interface. Unlike general remote network bridge, this device can support 1-8Channel E1 channel configuration, can automatically detect the number of E1 and select the E1 available. It allows E1 lines transmission time delay difference.

Product Photo

 32 (1) 

19inch 1U Type

Features

  • Based on self -copyright IC
  • To achieve Ethernet data transparent transmission in 1-8E1 circuits
  • Can realize the local and the remote device reset
  • Ethernet Interface is 100BASE-FX, support VLAN protocol
  • Inter-set dynamic Ethernet MAC address (4,096) with local data frame filtering function
  • Single Channel lines rate is 1984Kbit/s, 8Channel Bandwidth is up to 7936Kbit/s
  • Channel 10M/100M Ethernet interface can isolate each other to realize communication independently
  • Ethernet interface supports10M/100M, half/full duplex auto- adaptable and AUTO-MDIX  (crossed line and straightly connected line self-adaptable )
  • CRC automatic alarm threshold can be set to isolate the poor quality transmission lines and cut off a single-direction. When 2M branch circuit onedirection error rate exceeds threshold, cutting off this direction the other direction is not affected; that is to say, both of the Ethernet directiontransmission can be asymmetric
  • Allow 8Channel E1 transmission time delay difference 100ms. When the margin exceed the allowed range, the system can automatically stopon the E1 that time delay is too large to send data
  • E1 interface conform to ITU-T G.703, G.704 and G.823, not support the use of signal timeslot
  • E1 interface module with inter-set clock recovery circuit and HDB3 code circuit
  • Support E1 channel hot-plug in the device, and automatically detects the effective E1 channel and will not interrupt data transmission
  • Can support 1-8Channel E1 channel configuration, can automatically detect the number of E1 and select the E1 available;

Parameters

♦ E1 Interface

  Interface Standard: comply with protocol G.703;
 Interface Rate:     n*64Kbps±50ppm;
 Interface Code: HDB3;

 E1 Impedance: 75Ω (unbalance), 120Ω (balance);

 Jitter tolerance: In accord with protocol G.742 and G.823

 Allowed Attenuation:     0~6dBm

♦ Ethernet interface(10/100M)

Interface rate: 10/100 Mbps, half/full duplex auto-negotiation

Interface Standard:     Compatible with IEEE 802.3, IEEE 802.1Q (VLAN)

MAC Address Capability: 4096

Connector:     RJ45, support Auto-MDIX

♦ Working environment

Working temperature: -10°C ~ 50°C

Working Humidity: 5%~95 % (no condensation)

Storage temperature: -40°C ~ 80°C

Storage Humidity: 5%~95 % (no condensation)

Specifications

Model Model Number: JHA-CE8F4
Functional Description 8E1/4FE interface converter4channel 100M Ethernet transmission over 8E14channel Ethernet support Logical lsolation
Port Description 8 E1 interfaces, 4 Fast Ethernet ports
Power Power supply: AC180V ~ 260VDC –48VDC +24VPower consumption: ≤10W
Dimension Product Size: 19 inch 1U   483X138X44mm (WXDXH)
Weight 2.0KG/piece

Application 

Application description:

When the device set logic isolation ,can be achieved Independent communications between A – A1, B – B1, C – C1 and D – D1.
1. Protocol converters are used in pairs;
2.1-8channel E1 transmission line bandwidth 1984Kbit / s ~15872Kbit / s.

32 (2)


Product detail pictures:

High Quality for E1 Conversion V24 - 8E1-4FE interface Converter JHA-CE8F4 (Logical lsolation) – JHA detail pictures

High Quality for E1 Conversion V24 - 8E1-4FE interface Converter JHA-CE8F4 (Logical lsolation) – JHA detail pictures


Related Product Guide:

Our firm aims to operating faithfully, serving to all of our shoppers , and working in new technology and new machine regularly for High Quality for E1 Conversion V24 - 8E1-4FE interface Converter JHA-CE8F4 (Logical lsolation) – JHA , The product will supply to all over the world, such as: Belgium, Brazil, Barbados, With the development and enlargement of mass clients abroad, now we've set up cooperative relationships with many major brands. We've our own factory and also have many reliable and well-cooperated factories in the field. Adhering to the quality first, customer first, We are provideing high-quality, low-cost items and high quality service to customers. We sincerely hope to establish business relationship with customers from all over the world on the basis of quality, mutually benefit. We welcome OEM projects and designs.

Factory equipment is advanced in the industry and the product is fine workmanship, moreover the price is very cheap, value for money!
5 Stars By Atalanta from Algeria - 2018.09.08 17:09
In our cooperated wholesalers, this company has the high quality and reasonable price, they are our first choice.
5 Stars By Adam from Boston - 2017.04.18 16:45
Write your message here and send it to us