High definition Industrial Switches - 5 10/100/1000TX PoE/PoE+ | Unmanaged Industrial PoE Switch JHA-IG05P – JHA

Features

♦ Support 4 10/100/1000Base-T(X) PoE/PoE+ port and 1 10/100/1000Base-T(X) Ethernet port.

♦ Support IEEE802.3, IEEE802.3u, IEEE802.3x, IEEE802.3af/at.

♦ Support IEEE802.3af, maximum 15.4W power supply.

♦ Support IEEE802.3at, maximum 30W power supply.

♦ Industrial chip design, 15kV ESD protection, 8kV surge protection.

♦ DC48-58V redundancy power, reverse polarity protection.

♦ Industrial grade 4 design, -40-85°C operating temperature.

♦ IP40 rated aluminum alloy housing, DIN-Rail mounted.

Introduction

JHA-IG05P is a plug-and-play unmanaged industrial PoE switch. This switch provides 5 10/100/1000Base-T(X) Ethernet port, which 4-port support Power-over-Ethernet (PoE) function (IEEE802.3af/at). The switches are classified as power source equipment (PSE), and when used in this way, the switches enable centralization of the power supply, providing up to 30 watts of power per port and reducing the effort needed for installing power. The switches can be used to power IEEE802.3af/at standard devices (PD), eliminating the need for additional wiring.
JHA-IG05P support CE, FCC, RoHS standard, adopt industry standard design, IP40 protection, rugged high-strength metal case, power input (DC48-58V). The switch support IEEE802.3, IEEE802.3u, IEEE802.3x with 10/100/1000Base-T(X), full/half-duplex, and MDI/MDI-X auto-adaptation, the -40-85℃ operating temperature, can meet all kinds of industrial environment requirement, providing reliable and economic solution for your industrial Ethernet network.

Specification

Transmission Mode: Store and Forward

Packet Buffer Size: 1M

System Exchange Bandwidth: 10Gbps

MAC Table Size: 8K

Delay Time: < 3μs

Ethernet Port

10/100/1000Base-T(X) auto speed control, half/full duplex and MDI/MDI-X auto-adaptation

PoE

Pin-out: 1/2(+), 3/6(-), IEEE802.3af max 15.4w, IEEE802.3at max 30w.

LED Indicator

Power Indicator: P1, P2

Port Indicator: LINK / ACT 

Power Supply

Input Voltage: DC48-58V

Connector: 6 bit 5.08mm removable terminal block

Full Load: <3W

Protection Mechanism: overload protection, reverse connection protection, redundancy protection

Mechanical Structure

Shell: IP40 protection, aluminum alloy housing

Dimension: 143*104*48mm( L*W*H )

Weight: 500g

Installation: DIN-Rail mounting, wall mounting

Operating Environment

Operating Temperature: -40-85°C

Storage Temperature: -40-85°C

Ambient Relative Humidity: 5%-95% (non-condensing)

Industry Standards

EMI:FCC Part 15 Subpart B Class A, EN 55022 Class A

EMS:EN61000-4-2 (ESD), Level 4 at 15kV(Air), 8kV(Contact)

EN61000-4-3 (R/S), Level 3 at 10V/m

EN61000-4-4 (EFT), Level 4 at 4kV(Power Port), 2kV(Date Port)

EN61000-4-5 (Surge), Level 4 at 4kV

EN61000-4-6 (CS), Level 3 at 10V/m

EN61000-4-8, Level 5 at 100A/m

Shock:IEC 60068-2-27

Free Fall:IEC 60068-2-32

Vibration:IEC 60068-2-6

Certification

CE, FCC, RoHS

MTBF

>100,000 Hours

Warranty

5-years

Dimension

Order Information