Good Quality Industrial Ethernet Switch – 8 10/100/1000TX PoE/PoE+ and 4 1000X SFP Slot | Managed Industrial PoE Switch JHA-MIGS48P – JHA
Good Quality Industrial Ethernet Switch – 8 10/100/1000TX PoE/PoE+ and 4 1000X SFP Slot | Managed Industrial PoE Switch JHA-MIGS48P – JHA Detail:
Features
♦ Support 8 10/100/1000Base-T(X) PoE/PoE+ port and 4 1000Base-X SFP slot.
♦ Support G.8032(ERPS), IEEE802.3, IEEE802.3u, IEEE802.3z, IEEE802.3x, IEEE802.3ad, IEEE802.3ab, IEEE802.3af/at, IEEE802.1p, IEEE802.1x, IEEE802.1Q, IGMP Snooping, IPv4/IPv6 precedence.
♦ Support CLI, SNMP, WEB management, Console/Telnet command-line management and syslog, using self-developed ring network technology, recovery time <20ms.
♦ DC48-58V redundancy power, reverse polarity protection.
♦ Support PoE/PoE+, IEEE802.3af: max 15.4W, IEEE802.3at: max 30W.
Introduction
JHA-MIGS48P is a high performance, cost-effective high-end managed industrial PoE switch. The switch provides 8 10/100/1000Base-T(X) PoE/PoE+ port and 4 1000Base-X SFP slot. Each port has a PoE function, especially for difficult to provide AC power and wiring costs demanding application scenarios, automatically adapt to IEEE 802.3af/at standard.
The use of a Ring technology (network fault recovery <20ms) the user can easily set the redundant ring network to increase network reliability, it also support WEB, CLI, Telnet/serial console, Windows utility, and SNMP management of a variety of ways, rich QoS features for data traffic control and management, support ring protocol, RSTP and STP Ethernet redundancy support port-based VLAN, IEEE 802.1Q VLAN and GVRP protocol. The product also industrial design, and can be widely used in automotive PIS, CCTV, video surveillance systems, train control system, but also applies to any vibration shock, EMC compatibility requirements of harsh industrial applications, can meet a variety of industrial site requirements to achieve higher reliability.
Specification
|
Protocol Standard |
G.8032(ERPS), IEEE802.3, IEEE802.3u, IEEE802.3z, IEEE802.3x, IEEE802.3ad, IEEE802.3ab, IEEE802.3af/at, IEEE802.1p, IEEE802.1x, IEEE802.1Q, IGMP Snooping, IPv4/IPv6 precedence |
|
Switching Performance |
Forwarding Rate: 26.7MppsTransmission Mode: Store and ForwardPacket Buffer Size: 12MBackplane Bandwidth: 24Gbps
MAC Table Size: 16K Priority Queues: 8 Delay Time: < 10μs |
|
Ring Network Management |
Bandwidth Management: outbound port speed, speed limit particle size: 0 - 1G, step 100kbps |
|
Expanding Ring Back: based on port, support link aggregation/LACP, support load balancing, support port protection, Spanning Tree Protocol: STP, RSTP, MSTP |
|
| System Upgrade: support under BOOTROM Xmodem/TFTP upgrade, support for system files and upload and upgrade configuration files | |
| User Management: hierarchical user and password protection, port septum away, broken fiber alarm, power failure alarm | |
| System Maintenance: the optical module diagnostics, ping, port system count, support ERPS, ring protection switching time<20ms, with QOS traffic classification, priority level of trust, SP, WRR queue scheduling, support streaming strategies, suppression, support SNMP network pipe, support CLI/SNMP/WEB management, support Console and Telnet command line management and syslog | |
|
Ethernet Port |
10/100/1000Base-T(X) auto speed control, full/half duplex and MDI/MDI-X auto-adaptation |
|
Fiber Port |
1000Base-X SFP slot |
|
PoE |
Pin-out: 1/2(+), 3/6(-), IEEE802.3af max 15.4w, IEEE802.3at max 30w. |
|
LED Indicator |
Power Indicator: PWRPort Indicator: LINK / ACT |
|
Power Supply |
Input Voltage: DC48-58VConnector: 6 bit 5.08mm removable terminal blockFull Load: <10W Protection Mechanism: overload protection, reverse connection protection, redundancy protection |
|
Mechanical Structure |
Shell: IP40 protection, aluminum alloy housingDimension: 143*104*48mm( L*W*H )Weight: 600gInstallation: DIN-Rail mounting, wall mounting |
|
Operating Environment |
Operating Temperature: -40-85°CStorage Temperature: -40-85°CAmbient Relative Humidity: 5%-95% (non-condensing) |
|
Industry Standards |
EMI:FCC Part 15 Subpart B Class A, EN 55022 Class AEMS:EN61000-4-2 (ESD), Level 4 at 15kV(Air), 8kV(Contact)EN61000-4-3 (R/S), Level 3 at 10V/mEN61000-4-4 (EFT), Level 4 at 4kV(Power Port), 2kV(Date Port)
EN61000-4-5 (Surge), Level 4 at 4kV EN61000-4-6 (CS), Level 3 at 10V/m EN61000-4-8, Level 5 at 100A/m Shock:IEC 60068-2-27 Free Fall:IEC 60068-2-32 Vibration:IEC 60068-2-6 |
|
Certification |
CE, FCC, RoHS |
|
MTBF |
>100,000 Hours |
|
Warranty |
5-years |
Dimension
Order Information
|
Model No. |
Description of Goods |
|
JHA-MIGS48P |
Managed Industrial PoE Switch, 8 10/100/1000Base-T(X) PoE/PoE+ and 4 1000Base-X SFP Slot, DIN-Rail, DC48-58V, -40-85°C Operating Temperature |
| Power Supply: DC48V DIN-Rail Power Supply or Power Adapter is Optional. | |
Product detail pictures:
Related Product Guide:
With our leading technology as well as our spirit of innovation,mutual cooperation, benefits and development, we will build a prosperous future together with your esteemed company for Good Quality Industrial Ethernet Switch – 8 10/100/1000TX PoE/PoE+ and 4 1000X SFP Slot | Managed Industrial PoE Switch JHA-MIGS48P – JHA , The product will supply to all over the world, such as: Anguilla, Borussia Dortmund, Wellington, The company attaches great importance to product quality and service quality, based on the business philosophy good with people, genuine to whole world, your satisfaction is our pursuit. we design products, According to customer's sample and requirements, to meet the needs of the market and offer different customers with personalized service. Our company warmly welcomes friends at home and abroad to visit, to discuss cooperation and seek common development!
By Cornelia from Ghana - 2017.08.28 16:02
As a veteran of this industry, we can say that the company can be a leader in the industry, select them is right.
By Nancy from Sheffield - 2017.03.28 16:34
