Good Quality FTTH – 4*10/100M Ethernet interface+1 RF interface+1 EPON interface, built-in FWDM EPON ONU, without Wi-Fi function JHA700-E304 – JHA

Short Description:

Overview

Feedback (2)

Download

Sincerity, Innovation, Rigorousness, and Efficiency could be the persistent conception of our enterprise to the long-term to produce together with clients for mutual reciprocity and mutual profit for Industrial Optical Ethernet Switch , Gigabit Ethernet Optical Fiber Switch , Ethernet Converters , We wish to just take this opportunity to ascertain long-term enterprise relationships with clients from all over the earth.

Good Quality FTTH – 4*10/100M Ethernet interface+1 RF interface+1 EPON interface, built-in FWDM EPON ONU, without Wi-Fi function JHA700-E304 – JHA Detail:

Brief Views

JHA700-E304 series is fiber to the home multi service access EPON ONU. It’s based on the mature, stable, high cost performance EPON technology and has gigabit Ethernet switching, WDM and HFC technology. JHA700-E304 series has a higher bandwidth, higher reliability, easy management and good quality of service (QoS) guarantee with technical performance of equipment meet the IEEE802.3ah requirements and have good compatibility with third party manufacturers OLT.

EPON technology is a kind of emerging technology which takes advantage of PON technology and Ethernet technology also is a kind of point to multi-point network technology. OLT through the passive optical network to connect multiple ONU with single fiber bidirectional technical can rarely used fiber resources to meet the operators of the multi-user access requirements.

It adopts single fiber WDM technology with downlink wavelength 1550nm and 1490nm, uplink wavelength 1310nm . It only needs one-core fiber to transmit data and CATV service.

Functional Feature

♦ Support port-based rate limitation and bandwidth control;

♦ In compliant with IEEE802.3ah Standard

♦ Up to 20KM transmission Distance

♦ Support data encryption, group broadcasting, port Vlan separation ,etc.

♦ Support Dynamic Bandwidth Allocation (DBA)

♦ Support ONU auto-discovery/Link detection/remote upgrade of software;

♦ Support port mode of VLAN configuration

♦ Support power-off alarm function ,easy for link problem detection

♦ Support broadcasting storm resistance function

♦ Support port isolation between different ports

♦ Support port flow control

♦ Support ACL to configure data packet filter flexibly

♦ Specialized design for system breakdown prevention to maintain stable system

♦ Support software online upgrading

♦ EMS network management based on SNMP ,convenient for maintenance

Product interface and LED definitions

Indicator			Description
1	PWR	Power status	On: The ONU is power onOff: The ONU is Power off
2	CATV	CATV status	On：CATV optical normalOff：The CATV signals are not received
3	LAN1-4	LAN port status	On: Ethernet connection is normalBlinking: Data is being transmitted through the Ethernet portOff: Ethernet connection is not set up
4	LOS	EPON optical signals	On: Optical power lower than receiver sensitivity ;Off: Optical in normal
5	PON	ONU Register	On: Success to register to OLTBlinking: In process of registering to OLTOff: Failed to register to OLT;

Specification

Item	Parameter
PON Interface	1 EPON optical interface Meet 1000BASE-PX20+ standard Symmetric 1.25Gbps upstream/downstream SC/APC single-mode fiber split ratio: 1:64 Transmission distance 20KM
User Ethernet Interface	410/100M or 410/100/1000M or 110/100/1000M and 310/100/1000M auto-negotiationFull/half duplex mode RJ45 connector Auto MDI/MDI-X 100m distance
RF Interface	Female F-Type Connector
Power Interface	12V DC Power supply
PONOpticalParameter	Wavelength: Tx 1310nm, Rx1490nm Tx Optical Power: 0～4dBm Rx Sensitivity: -27dBm Saturation Optical Power: -3dBm
Data Transmission Parameter	PON Throughput: Downstream 980Mbps; Upstream 950Mbps Ethernet: 100Mbps or 1000Mbps Packet Loss Ratio: <1*10E-12 latency: <1.5ms
Business Capability	Layer 2 wire speed switchingSupport VLAN TAG/UNTAG，VLAN translationSupport Port-based speed limitationSupport Priority classification Support storm control of broadcast Support loop detection
Network Management	Support IEEE802.3 QAM, ONU can be remotely managed by OLTSupport EMS management through OLT SNMP -agent and TelnetLocal management
Management Function	Status monitor, Configuration management, Alarm management, Log management
Shell	Plastic casing
Power	4FE: <6.5W, 12V/0.6A power supply adapter3FE+1GE: <6.5W, 12V/0.6A power supply adapter4GE: <7.5W, 12V/1A power supply adapter
Physical Specifications	Item Dimension：170mm(L)130mm(W)30mm(H)Item weight：0.3kg
Environmental Specifications	Operating temperature: 0 to 50ºC Storage temperature: -40 to 85ºC Operating humidity: 10% to 90%(Non-condensing) Storage humidity: 10% to 90%(Non-condensing)

CATV

Item	Parameter
Wavelength	1550nm
Optical return loss	>45dB
Input optical power	-18dBm～0dBm
RF frequency	47MHz~1000MHz
RF output lever	78dBuV (@-12~-2dBm@85MHz)
CNR	>41dB (@-10dBm@DS22 Channel)
CSO	>60dBc (@-10dBm@DS22 Channel)
CTB	>60dBc (@-10dBm@DS22 Channel)
RF output return loss	>12dB
RF impedance	75Ω
AGC function	Support

Network application

Typical Solution：FTTH, FTTO

Typical Business：INTERNET, CATV

Figure: JHA700-E304 (not include wifi) series EPON ONU Application Diagram

Ordering Information

Product Name	Product Model	Descriptions
4FE+CATV Single fiber	JHA700-E304FA-HR501	4*10/100M Ethernet interface, 1 RF interface, 1 EPON interface, built-in FWDM, Input optical power -18dBm～0dBm, support AGC function, Plastic casing, external power supply adapter
4GE+CATV Single fiber	JHA700-E304GA-HR501	4*10/100/1000M Ethernet interface, 1 RF interface, 1 EPON interface, built-in FWDM, Input optical power -18dBm～0dBm, support AGC function, Plastic casing, external power supply adapter
1GE+3FE+CATV Single fiber	JHA700-E304XA-HR501	310/100M and 110/100/1000M Ethernet interface, 1 RF interface, 1 EPON interface, built-in FWDM, Input optical power -18dBm～0dBm, support AGC function, Plastic casing, external power supply adapter