Featured
-
China OEM Din Rail Switch - 2*10/100/1000TX – 1*1000X SFP Slot | Fiber Media Converter JHA-G12 – JHA
Introduction JHA-G12 series is complies with IEEE802.3 standards, It is designed to convert data signal between 1000Base-FX and 10/100/1000Base-TX Ethernet. The media converter is connected between fiber cable and twisted cable, extend your Ethernet network beyond the 100-meter limit imposed by copper cable. This converter model can be used as slide-in module to the 14-slot 19″ Rack-Mount Chassis. Converter is transparent to all protocols, can be used all all areas as Fiber to The Home,... -
Good Quality SFP Module – 40Gb/S Multi Mode 300m | Dual Fiber MPO QSFP+ Transceiver JHA-QC01 – JHA
Features: ♦ 4 independent full-duplex channels ♦ Up to 11.2Gbps per channel bandwidth ♦ Aggregate bandwidth of > 40Gbps ♦ MTP/MPO optical connector ♦ QSFP MSA compliant ♦ Digital diagnostic capabilities ♦ Capable of over 300m transmission on OM3 Multimode Fiber (MMF)and 150m on OM4 MMF ♦ CML compatible electrical I/O ♦ Single +3.3V power supply operating ♦ TX input and RX output CDR retiming ♦ Built-in digital diagnostic functions ♦ Tempe... -
Good Quality Industrial Ethernet Switch – 8 10/100/1000TX PoE/PoE+ and 4 1000X SFP Slot | Managed Industrial PoE Switch JHA-MIGS48P – JHA
Features ♦ Support 8 10/100/1000Base-T(X) PoE/PoE+ port and 4 1000Base-X SFP slot. ♦ Support G.8032(ERPS), IEEE802.3, IEEE802.3u, IEEE802.3z, IEEE802.3x, IEEE802.3ad, IEEE802.3ab, IEEE802.3af/at, IEEE802.1p, IEEE802.1x, IEEE802.1Q, IGMP Snooping, IPv4/IPv6 precedence. ♦ Support CLI, SNMP, WEB management, Console/Telnet command-line management and syslog, using self-developed ring network technology, recovery time <20ms. ♦ DC48-58V redundancy power, reverse polarity protection. ♦ Support Po... -
Bottom price Serial Interface Rs232 Rs422 Rs485 - 16*E1 to 3x1000Base-TX+2x1000Base-X Interface Converter JHA-CE16G3F2 – JHA
16*E1 to 3x1000Base-TX+2x1000Base-X JHA-CE16G3F2 Interface Converter Overview The device using reverse direction multiplexing technology to bundle for multiple E1 to transmit the Ethernet data of 3Channel 1000BASE-TX and 2x1000Base-X. It can realize 1~16 E1 convert between Ethernet optical interface, to make E1 channels interconnected with Ethernet optical interface. Using GFP encapsulation, support the LCAS (link capacity adjustment scheme) and LAPS protocol. this device can support 1-16Cha... -
High Quality for Rs485 Data Video Converter – Fiber-8Voice +FE Multiplexer JHA-P08FE01 – JHA
Fiber-8Voice +FE Multiplexer JHA-P08FE01 Overview This device provides 1-8Channel telephone, 1 Channel 10M/100M Ethernet interface (Wire Speed 100M)，1Channel Ethernet interface is switch interface, can support VLAN. Photo Mini Type Features Based on self -copyright IC； The local end can display the fiber connection status of the remote device； Voice port supports FXO and FXS port,Support FXO/FXS, Magnet telephone Interface, FXO port docking with program-controlled switchboard, FXS port ... -
OEM/ODM Supplier Rs232 To Fiber Media Converter - Serial to E1 Converter JHA-CE1Q1 – JHA
E1-RS422 Converter JHA-CE1Q1 Overview This interface converter is based on FPGA, providing one E1 interface and one RS422 serial interface. The product breaks through contradictions between traditional serial interface communication distance and communication rate, besides, it also can solve electromagnetic interference, ground ring interference and lightning damage. The device greatly improves reliability, security and confidentiality of data communication. It is widely used for various indu... -
Professional China G703 E1 To V35 Converter - Unframed E1-4FE interface Converter JHA-CE1F4 – JHA
Unframed E1-4FE interface Converter JHA-CE1F4 Overview This protocol converter (interface converter) using large scale FPGA design, ITU-T G.703 standard unframed E1 interfaces and four 10 / 100Base-T Ethernet interface converter, 10 / 100Base-T channels will be transferred to the switch, HUB, routers, bridges, or other device. And through Optical and other transport equipment were transferred, networking can be composed of different network segments. This device is a high performance, adaptiv... -
Hot-selling Serial Converter - Co-Directional 64K-RS232/422/485 Converter JHA-CE1tD1/R1/Q1 – JHA
Co-Directional 64K-RS232/422/485 Converter JHA-CE1tD1/R1/Q1 Overview The G.703 (Co-Directional G.703) interface divides 64Kbps cycle into 4 unit intervals, it uses“0101” represent “0”, “1100” represent “1″. By alternating transformation polarity of the adjacent block, binary signals convert three-level signals. In every 8th group destroyed block of alternating polarity, thus to transmit 8KHz timing signal. By the above coding, G.703 co-directional 64Kbps signal could achieve transmit... -
Good Quality Industrial Ethernet Switch – 4 10/100TX and 1 100FX | Unmanaged Industrial Ethernet Switch JHA-IF14 – JHA
Features ♦ Support 1 100Base-FX fiber port and 4 10/100Base-T(X) Ethernet port. ♦ Support IEEE802.3, IEEE802.3u, IEEE802.3x. ♦ Plug-and-play, 10/100Base-T(X), full/half duplex, MDI/MDI-X auto-adaptation. ♦ Industrial chip design, 15kV ESD protection, 8kV surge protection. ♦ DC10-58V redundancy power, reverse polarity protection. ♦ nIndustrial grade 4 design, -40-85°C operating temperature. ♦ IP40 rated aluminum alloy housing, DIN-Rail mounted. Introduction JHA-IF14 is a plug-and-play unmanage... -
Good Quality Industrial Ethernet Switch – 1 10/100TX and 1 100X SFP Slot | Mini Industrial Media Converter JHA-IFS11C – JHA
Features ♦ Support 1 100Base-X SFP slot and 1 10/100Base-T(X) Ethernet port. ♦ Designed to fit into space-limited camera enclosure, can also be used as DIN-Rail mounted or panel mounted unit. ♦ Support Link Fault Pass Through(LFP), converter mode and switch mode. ♦ Industrial chip design, 15kV ESD protection, 8kV surge protection. ♦ DC5-60V and AC18-36V redundancy power. ♦ IP40 Rated aluminum alloy housing, -40-85°C operating temperature. Introduction JHA-IFS11C is a true mini, rugged industr... -
High Quality Unmanaged Fiber Ethernet Switch - 4 10/100TX – 1 100FX | Fiber Ethernet Switch JHA-F14 – JHA
5-port Fiber Ethernet Switch, 1-port 100Base-FX and 4-port 10/100Base-T(X) Introduction JHA-F14 series is complies with IEEE802.3 standards, It is designed to convert data signal between 100Base-FX and 10/100Base-TX fast Ethernet. The media converter is connected between fiber cable and twisted cable, extend your Ethernet network beyond the 100-meter limit imposed by copper cable. Converter is transparent to all protocols, can be used all all areas as Fiber to The Home, Fiber to the Business ... -
100% Original E1 Interface Converter - Framed E1-FE+4RS232 interface Converter JHA-CE1F1R4 – JHA
Overview This protocol converter (interface converter) using large scale FPGA design, providing a framing E1 interface and an Ethernet interface and four serial interfaces, it is possible to achieve 10 / 100Base-T Ethernet data over E1 channels transmission, is a high performance, self-learning Ethernet bridge. The device serves as an extension of Ethernet devices, use of existing networks (PDH / SDH / microwave, etc.) provided by the E1 channels to interconnect both ends of the lower cost Et...
