Featured
-
OEM Factory for Dual Fiber 10/100m - 16E1+4FE(Physical isolation) JHA-CPE16WF4 PDH Fiber Multiplexer – JHA
16E1+4FE(Physical isolation) JHA-CPE16WF4 PDH Fiber Multiplexer Overview This series of equipment is the company developed the PDH fiber transmission dedicated VLSI developed on the basis of point to point optical transmission equipment. Provide 1-16 E1 interfaces, primary and backup fiber optical interface connector, 1-4 physical isolation 10/100M Fast Ethernet interface (independent four-wire speed 100M,total bandwidth is 4*100M), as well as two business expansion interface. 2 Extended serv... -
Good Quality Industrial Ethernet Switch – 4 10/100TX PoE/PoE+ and 1 100FX | Unmanaged Industrial PoE Switch JHA-IF14P – JHA
Features ♦ Support 4 10/100Base-T(X) PoE/PoE+ port and 1 100Base-FX fiber port. ♦ Support IEEE802.3, IEEE802.3u, IEEE802.3x, IEEE802.3af/at. ♦ Support IEEE802.3af, maximum 15.4W power supply. ♦ Support IEEE802.3at, maximum 30W power supply. ♦ Industrial chip design, 15kV ESD protection, 8kV surge protection. ♦ DC48-58V redundancy power, reverse polarity protection. ♦ Industrial grade 4 design, -40-85°C operating temperature. ♦ IP40 rated aluminum alloy housing, DIN-Rail mounted. Introduction... -
OEM Factory for Dual Fiber 10/100m - 16E1+LCD Display +SNMP JHA-C2P-E16bF4R2 PDH Fiber Multiplexer – JHA
16E1+LCD Display +SNMP JHA-C2P-E16bF4R2 PDH Fiber Multiplexer Overview This device has the console control, provides the 1+1 fiber back-up protection ,point to point optical transmission, LCD display , on the basic of our company development of the PDH optical transmission, use the special VLSI and the SNMP NMS. The device provides 1-16*E1 interface, 1-4*10/100M Ethernet interface (Wire speed 100M) and 2 expansion interface. 4Channel Ethernet interface is switch interface, can support VLA... -
Good Quality FTTH – 1*10/100/1000M Ethernet interface+1 GPON interface, Support 300Mpbs Wifi GPON ONT JHA700-G511GW-HR630 – JHA
Brief Views JHA700-G511GW-HR630 GPON ONT is one of the GPON optical network unit design to meet the requirement of the broadband access network. It apply in FTTH/FTTO to provide the data service based on the GPON network. GPON is the latest generations of access network technology. ITU-T G.984 is the standard protocol of GPON. The GPON standard differs from other PON standards in that it achieves higher bandwidth and higher efficiency using larger, variable-length packets. GPON offers effici... -
Fast delivery Ethernet Equipment - Framed E1-FE interface Converter JHA-CE1fF1 – JHA
Framed E1-FE interface Converter JHA-CE1fF1 Overview This interface converter is based on FPGA,providing one framed E1 interface and one Ethernet interface to achieve 10/100Base-T Ethernet data transmission on the E1 channel. It is a high performance, self-learning Ethernet bridge. This device is the extension device of Ethernet, using network (PDH/SDH/Microwave) that provide E1 channel to achieve local and remote Ethernet interconnecting with serial interfaces at a lower cost. The device has... -
Good Quality Industrial Ethernet Switch – 1 10/100/1000TX and 1 1000X SFP Slot | Industrial Media Converter JHA-IGS11M – JHA
Features ♦ Support 1 1000Base-X SFP slot and 1 10/100/1000Base-T(X) Ethernet port. ♦ Support IEEE802.3, IEEE802.3u, IEEE802.3x. ♦ Plug-and-play, 10/100/1000Base-T(X), full/half duplex, MDI/MDI-X auto-adaptation. ♦ Industrial chip design, 15kV ESD protection, 8kV surge protection. ♦ DC10-58V redundancy power, reverse polarity protection. ♦ Industrial grade 4 design, -40-85°C operating temperature. ♦ IP40 rated aluminum alloy housing, DIN-Rail mounted. Introducation JHA-IGS11M is a plug-and-pla... -
Factory Supply Gigabit Security Monitoring Dedicated Switch - 2*10/100/1000TX – 1*1000X SFP Slot | Fiber Media Converter JHA-G12 – JHA
Introduction JHA-G12 series is complies with IEEE802.3 standards, It is designed to convert data signal between 1000Base-FX and 10/100/1000Base-TX Ethernet. The media converter is connected between fiber cable and twisted cable, extend your Ethernet network beyond the 100-meter limit imposed by copper cable. This converter model can be used as slide-in module to the 14-slot 19″ Rack-Mount Chassis. Converter is transparent to all protocols, can be used all all areas as Fiber to The Home,... -
Good Quality Industrial Ethernet Switch – 2 10/100TX PoE/PoE+ and 1 100FX | Unmanaged Industrial PoE Switch JHA-IF12P – JHA
Features ♦ Support 2 10/100Base-T(X) PoE/PoE+ port and 1 100Base-FX fiber port. ♦ Support IEEE802.3, IEEE802.3u, IEEE802.3x, IEEE802.3af/at. ♦ Support IEEE802.3af, maximum 15.4W power supply. ♦ Support IEEE802.3at, maximum 30W power supply. ♦ Industrial chip design, 15kV ESD protection, 8kV surge protection. ♦ DC48-58V redundancy power, reverse polarity protection. ♦ Industrial grade 4 design, -40-85°C operating temperature. ♦ IP40 rated aluminum alloy housing, DIN-Rail mounted. Introduction... -
Good Quality SFP Module – 10G Single Mode 80Km DDM | Dual Fiber SFP+ Transceiver JHA3980D – JHA
Features: 1). Supports 9.95 to 11.3Gb/s bit rates 2). Hot-Pluggable 3). Duplex LC connector 4). 1550nm cooled EML transmitter, APD photo-detector 5). SMF links up to 80km 6). 2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface 7). Power Supply :+3.3V 8). Power consumption<1.8W 9). Temperature Range: 0~ 70°C 10). RoHS compliant Applications: 1). 10GBASE-ZR/ZW Ethernet 2). SONET OC-192... -
Factory Cheap Hot 100g Qsfp28 Aoc - 25G SFP28 Active optical cable JHA-SFP28-25G-AOC – JHA
Features ◊ Electrical interface compliant to SFF-8431 ◊ 850nm VCSEL laser and PIN photo-detector ◊ Maximum link length of 70m on OM3 MMF and 100m on OM4 MMF ◊ Digital diagnostics functions are available via the I2C interface ◊ Operating case temperature Commercial: 0°C to +70 °C ◊ +3.3V single power supply ◊ Power consumption less than 1W ◊ RoHS compliant ◊ Password protection for A0h and A2h Applications ◊ 25GBASE-SR Ethernet ◊ Servers, switches, storage and host card adapters Specification ... -
Good Quality PoE Switch – 8*100/1000mbps POE Port+2*100/1000mbps UP Link Port+1*100/1000mbps SFP Port, Smart PoE Switch JHA-P41208BM – JHA
Introduction JHA-P41208BM series switches provide from one network node uses Cat5 cable simultaneous transmission of data and power, when AC power is not power or take power inconvenient (such as PTZ cameras and WiMAX devices), JHA-P41208BM series is designed for wireless networks, security automation applications. JHA-P41208BM series switches dramatically reduces the cost of wiring the power user, wireless LAN access points, video surveillance cameras and other equipment must be spent to be... -
Hot New Products Usb To Rs232 Converter - Ethernet to E1 Converter E1 to Fiber Ethernet JHA-CE8F4 – JHA
8E1-4FE interface Converter JHA-CE8F4 (Logical lsolation) Overview The device using reverse direction multiplexing technology to bundle for multiple E1 circuits to transmit the Ethernet data of 4Channel 100BASE-TX. It can realize conversion between 1~8 channel E1 and Ethernet optical interface, to make E1 channels interconnected with Ethernet optical interface. Using GFP encapsulation, support the LCAS (link capacity adjustment scheme) and LAPS protocol. This device can support 1-8 Chann...
