Fast delivery Ccwdm Mux - 8E1+LCD Display +SNMP JHA-C2P-E8bF4R2 PDH Fiber Multiplexer – JHA

8E1+LCD Display +SNMP JHA-C2P-E8bF4R2

PDH Fiber Multiplexer

Overview

This device has the console control, provides the 1+1 fiber back-up protection ,point to point optical transmission, LCD display , on the basic of our company development of the PDH optical transmission, use the special VLSI and the SNMP NMS.

    The device provides 1-8*E1 interface, 1-4*10/100M Ethernet interface (Wire speed 100M) and 2 expansion interface. 4Channel Ethernet interface is switch interface, can support VLAN. 2 expansion interface can be used as the transmission channel of RS232/RS485/RS422 asynchronous data. It is very flexible. It has alarm function. The work is reliable, stable, and low power consumption, high integration, small size

Product Photo

Features

• Provides 8 E1 transparent transmission;
• With char 16*2 LCD display and SNMP agent inside
• Provide Console manage interface (RS232)
• Provide two fiber interface 1+1 protect（APS）function ,and ALS（Automatic Laser Shutdown/Reduction）function
• Ethernet package size support 1916 byte and 4 Ethernet port could be set separately, and ethernet bandwidth can be setting base on multiple of 32K
• Uses standard 2 wire telephone (non-telephone handles) set as engineering order-wire hotline(optional)
• Provide two fiber interfaces, one as master, the other as slave, insuring uninterrupted service transmission
• The rate of optical port is 155Mbps, transmission range can reach 25KM, 40KM, 60KM, 80KM or 120KM;
• E1 interface code is HDB3，E1 vibration characteristic conforms to ITU-T G.703、G.823 and G.742;
• Ethernet port supports full/half duplex, 10/100M auto-Nego;
• Ethernet port supports VLAN function and has 4 devision mode for user selection;
• Has complete alarm function and can monitor remote device status;
• Supports two Fiber Loop-back,and Four E1 loop-back mode,and manage device conveniently;
• user configurable main alarm and minor alarm, display in LCD and sound alarm at speaker;
• AC 220V, DC-48V, DC+24V can be optional
• DC-48V/DC+24V power supply polarity detection function, Polarity-Free

Parameters

♦  Fiber

Multi-mode Fiber

50/125um, 62.5/125um,

Maximum transmission distance:       5Km @ 62.5 / 125um single mode fiber,attenuation (3dbm/km)

Wave Length:                                      820nm

Transmitting power:                           -12dBm (Min) ~-9dBm (Max)

Receiver sensitivity:                           -28dBm (Min)

Link budget:                                        16dBm

Single-mode Fiber

8/125um, 9/125um

Maximum transmission distance:       40Km

Transmission distance:                     40Km @ 9 / 125um single mode fiber, attenuation (0.35dbm/km)

Wave Length:                                      1310nm

Transmitting power:                           -9dBm (Min) ~-8dBm (Max)

Receiver sensitivity:                           -27dBm (Min)

Link budget:                                        18dBm

♦  E1 Interface

  Interface Standard:         comply with protocol G.703;
 Interface Rate:                2048Kbps±50ppm;
 Interface Code:               HDB3;

 E1 Impedance:                 75Ω (unbalance), 120Ω (balance);

 Jitter tolerance:               In accord with protocol G.742 and G.823

 Allowed Attenuation:      0~6dBm

♦  Ethernet interface (10/100M)

Interface rate:                   10/100 Mbps, half/full duplex auto-negotiation

Interface Standard:           Compatible with IEEE 802.3, IEEE 802.1Q (VLAN)

MAC Address Capability: 4096

Connector:                        RJ45, support Auto-MDIX

♦  Working environment

Working temperature:            -10°C ~ 50°C

Working Humidity:                  5%~95 % (no condensation)

Storage temperature:              -40°C ~ 80°C

Storage Humidity:                   5%~95 % (no condensation)

Specifications

Application