Factory wholesale Armored Cable - 100G QSFP28 Active optical cable JHA-QSFP28-100G-AOC – JHA
Factory wholesale Armored Cable - 100G QSFP28 Active optical cable JHA-QSFP28-100G-AOC – JHA Detail:
Features
◊ Support 100GBASE-SR4/EDR application
◊ Compliant to QSFP28 Electrical MSA SFF-8636
◊ Multi rate of up to 25.78125Gbps
◊ Transmission distance up to 100m
◊ +3.3V single power supply
◊ Low power consumption
◊ Operating temp Commercial: 0°C to +70 °C
◊ RoHS compliant
◊ UL certification cables (optional)
Applications
◊ 100GBASE-SR4 at 25.78125Gbps per lane
◊ Infini Band QDR, EDR
◊ Other optical links
Specification:
Absolute Maximum Ratings
Table1- Absolute Maximum Ratings
Parameter | Symbol |
Min. |
Typical | Max. | Unit | Notes |
Supply Voltage | Vcc3 |
-0.5 |
- | +3.6 | V | |
Storage Temperature | Ts |
-10 |
- | +70 | °C | |
Operating Humidity | RH |
+5 |
- | +85 | % | 1 |
Note: 1 No condensation
Recommended Operating Conditions
Table 2- Recommended operating Conditions
Parameter | Symbol | Min. | Typical |
Max. |
Unit | Notes |
Operating Case Temperature | TC | 0 | - |
+70 |
°C | |
Power Supply Voltage | Vcc | 3.14 | 3.3 |
3.47 |
V | |
Power Dissipation | Pd | - | - |
2.5 |
W | 1 |
Bit Rate | BR | 10.3125 | 25.78125 | - | Gbps |
Note: 1 Per terminal
Electrical Characteristics
Table 3- Electrical Characteristics
Parameter | Symbol | Min. | Typ. | Max. | Units | Notes | |
ModSelL | Module Select | VOL | 0 | - | 0.8 | V | |
Module Unselect | VOH | 2.5 | - | VCC | V | ||
LPMode | Low Power Mode | VIL | 0 | - | 0.8 | V | |
Normal Operation | VIH | 2.5 | - | VCC+0.3 | V | ||
ResetL | Reset | VIL | 0 | - | 0.8 | V | |
Normal Operation | VIH | 2.5 | - | VCC+0.3 | V | ||
ModPrsL | Normal Operation | VOL | 0 | - | 0.4 | V | |
IntL | Interrupt | VOL | 0 | - | 0.4 | V | |
Normal Operation | VoH | 2.4 | - | VCC | V | ||
Electrical transmitter Characteristics |
|||||||
Differential Date Input Swing | Vin,p-p | 200 | - | 1600 | mV | ||
Output Differential Impedance | Zin | 90 | 100 | 110 | Ω | ||
Electrical Receiver Characteristics | |||||||
Differential Data Output Swing | Vout | 200 | - | 800 | mV | ||
Bit Error Rate | BER |
- |
- |
E-12 |
- |
1 | |
Input Differential Impedance | ZD | 90 | 100 | 110 | Ω |
Note: 1 PRBS2^31-1@25.78125Gbps
Recommended Interface Circuit
Figure 1, Recommended Interface
Pin arrangement
Figure 2, Pin View
Table 4-Pin Function Definitions
Pin | Symbol | Name/Description | Notes |
1 | GND | Ground | 1 |
2 | Tx2n | Transmitter Inverted Data Input | |
3 | Tx2p | Transmitter Non-Inverted Data Input | |
4 | GND | Ground | 1 |
5 | Tx4n | Transmitter Inverted Data Input | |
6 | Tx4p | Transmitter Non-Inverted Data Input | |
7 | GND | Ground | 1 |
8 | ModSelL | Module Select | |
9 | ResetL | Module Reset | |
10 | Vcc Rx | +3.3V Power Supply Receiver | |
11 | SCL | 2-wire serial interface clock | |
12 | SDA | 2-wire serial interface data | |
13 | GND | Ground | 1 |
14 | Rx3p | Receiver Non-Inverted Data Output | |
15 | Rx3n | Receiver Inverted Data Output | |
16 | GND | Ground | 1 |
17 | Rx1p | Receiver Non-Inverted Data Output | |
18 | Rx1n | Receiver Inverted Data Output | |
19 | GND | Ground | 1 |
20 | GND | Ground | 1 |
21 | Rx2n | Receiver Inverted Data Output | |
22 | Rx2p | Receiver Non-Inverted Data Output | |
23 | GND | Ground | 1 |
24 | Rx4n | Receiver Inverted Data Output |
Pin |
Symbol |
Name/Description | Notes |
25 | Rx4p | Receiver Non-Inverted Data Output | |
26 | GND | Ground | 1 |
27 |
ModPrsL |
Module Present | |
28 | IntL | Interrupt | |
29 | Vcc Tx | +3.3V Power supply transmitter | |
30 | Vcc1 | +3.3V Power supply | |
31 |
LPMode |
Low Power Mode | |
32 | GND | Ground | 1 |
33 | Tx3p | Transmitter Non-Inverted Data Input | |
34 | Tx3n | Transmitter Inverted Data Input | |
35 | GND | Ground | 1 |
36 | Tx1p | Transmitter Non-Inverted Data Input | |
37 | Tx1n | Transmitter Inverted Data Input | |
38 | GND | Ground | 1 |
Note: 1. Circuit ground is internally isolated from chassis ground.
Monitoring Specification
Figure 3, Memory Map
Mechanical Design Diagram
Unit mm
Table 5- Cable
Length
Cable Length L(Unit: m) | Tolerant(Unit: cm) |
≤1.0 | +5/-0 |
1.0<L≤4.5 | +15/-0 |
4.5<L≤14.5 | +30/-0 |
>14.5 | +2%/-0 |
Warnings
Handling Precautions: This device is susceptible to damage as a result of electrostatic discharge (ESD).
A static free environment is highly recommended. Follow guidelines according to proper ESD procedures.
Laser Safety: Radiation emitted by laser devices can be dangerous to human eyes. Avoid eye exposure to direct or indirect radiation.
Product detail pictures:
![Factory wholesale Armored Cable - 100G QSFP28 Active optical cable JHA-QSFP28-100G-AOC – JHA detail pictures](https://jha-tech.goodao.net/uploads/886fee0b.jpg)
![Factory wholesale Armored Cable - 100G QSFP28 Active optical cable JHA-QSFP28-100G-AOC – JHA detail pictures](https://jha-tech.goodao.net/uploads/4db70ebf.jpg)
![Factory wholesale Armored Cable - 100G QSFP28 Active optical cable JHA-QSFP28-100G-AOC – JHA detail pictures](https://jha-tech.goodao.net/uploads/e24091d2.jpg)
Related Product Guide:
We're commitment to offer you the aggressive cost ,superb products and solutions high quality, too as fast delivery for Factory wholesale Armored Cable - 100G QSFP28 Active optical cable JHA-QSFP28-100G-AOC – JHA , The product will supply to all over the world, such as: azerbaijan, Lithuania, Nigeria, We aspire to meet the demands of our customers globally. Our range of merchandise and services is continuously expanding to meet customers' requirements. We welcome new and old customers from all walks of life to contact us for future business relationships and achieving mutual success!
![5 Stars](https://jha-tech.goodao.net/admin/img/star-icon.png)
It is a very good, very rare business partners, looking forward to the next more perfect cooperation!
![5 Stars](https://jha-tech.goodao.net/admin/img/star-icon.png)