Factory Supply Telephone Fiber Converter - Fiber-32Voice +2GE Multiplexer JHA-P32GE02 – JHA
Factory Supply Telephone Fiber Converter - Fiber-32Voice +2GE Multiplexer JHA-P32GE02 – JHA Detail:
Fiber-32Voice +2GE Multiplexer JHA-P32GE02
Overview
This device provides 1-32Channel telephone, 2Channel 1000M Ethernet interface (Wire Speed 1000M)，2Channel Ethernet interface is switch interface, can support VLAN.
Photo
19 Inch Type
Features
- Based on self -copyright IC
- Voice port supports FXO and FXS port,Support FXO/FXS, Magnet telephone Interface, FXO port docking with program-controlled switchboard, FXS port connected to the user’s telephone;
- 1~32channel Voice access, Voice FXO / FXS interface, support for caller ID / reverse polarity billing / fax function;
- Support various sites mutual number allocation function
- Ethernet interface supports10/100/1000M, half/full duplex auto- adaptable, support VLAN
- Ethernet interface can support AUTO-MDIX (crossed line and straightly connected line self-adaptable)
- Telephone interface with lightning protection, lightning reached IEC61000-4-5 Short circuit current wave 8 / 20μs, the peak output voltage 6KV open standards.
- The transmission distance is up to 2-120Km without interruption
- AC 220V, DC-48V, DC24V can be optional
Parameters
♦ Fiber
Multi-mode Fiber
50/125um, 62.5/125um,
Maximum transmission distance: 5Km @ 62.5 / 125um single mode fiber, attenuation (3dbm/km)
Wave Length: 820nm
Transmitting power: -12dBm (Min) ~-9dBm (Max)
Receiver sensitivity: -28dBm (Min)
Link budget: 16dBm
Single-mode Fiber
8/125um, 9/125um
Maximum transmission distance: 40Km
Transmission distance: 40Km @ 9 / 125um single mode fiber, attenuation (0.35dbm/km)
Wave Length: 1310nm
Transmitting power: -9dBm (Min) ~-8dBm (Max)
Receiver sensitivity: -27dBm (Min)
Link budget: 18dBm
♦ E1 Interface
Interface Standard: comply with protocol G.703;
Interface Rate: n*64Kbps±50ppm;
Interface Code: HDB3;
E1 Impedance: 75Ω (unbalance), 120Ω (balance);
Jitter tolerance: In accord with protocol G.742 and G.823
Allowed Attenuation: 0~6dBm
♦ Ethernet interface(10/100/1000M)
Interface rate: 10/100 Mbps, half/full duplex auto-negotiation
Interface Standard: Compatible with IEEE 802.3, IEEE 802.1Q (VLAN)
MAC Address Capability: 4096
Connector: RJ45, support Auto-MDIX
♦ FXS Phone Interface
Ring voltage: 75V
Ring frequency: 25HZ
Two-line Impedance: 600 Ohm (pick up)
Return loss: 40 dB
♦ FXO Switch Interface
Ring detect voltage: 35V
Ring detection frequency: 17HZ-60HZ
Two-line Impedance: 600 Ohm (pick up)
Return loss: 40 dB
Return loss: 20 dB
♦ Working environment
Working temperature: -10°C ~ 50°C
Working Humidity: 5%~95 % (no condensation)
Storage temperature: -40°C ~ 80°C
Storage Humidity: 5%~95 % (no condensation)
Specifications
| Model | Fiber-32Voice +2GE Multiplexer JHA-P32GE02 |
| Functional Description | 32 * telephone，2*1000 Mbps Ethernet，1* Fiber interface |
| Power | Power supply: AC180V ~ 260V；DC –48V；DC +24VPower consumption: ≤10W |
| Dimension | Product Size: 485X138X45mm(WXDXH) 19 1U |
| Weight | 2KG |
Application
Product detail pictures:
Related Product Guide:
We depend on sturdy technical force and continually create sophisticated technologies to meet the demand of Factory Supply Telephone Fiber Converter - Fiber-32Voice +2GE Multiplexer JHA-P32GE02 – JHA , The product will supply to all over the world, such as: Las Vegas, Juventus, Las Vegas, Our company considers that selling is not only to gain profit but also popularize the culture of our company to the world. So we are working hard to give you the wholehearted service and willing to give you competitive price in the market
By Esther from Jamaica - 2017.09.30 16:36
We always believe that the details decides the company's product quality, in this respect, the company conform our requirements and the goods are meet our expectations.
By Honey from Ukraine - 2017.11.20 15:58
