Factory Supply Telephone Fiber Converter - Fiber-32Voice +2FE Multiplexer JHA-P32FE02 – JHA
Factory Supply Telephone Fiber Converter - Fiber-32Voice +2FE Multiplexer JHA-P32FE02 – JHA Detail:
Fiber-32Voice +2FE Multiplexer JHA-P32FE02
Overview
This device provides 1-32Channel telephone, 2Channel 10M/100M Ethernet interface (Wire Speed 100M)，2Channel Ethernet interface is switch interface, can support VLAN.
Photo
19 Inch Type
Features
- Based on self -copyright IC
- Voice port supports FXO and FXS port,Support FXO/FXS, Magnet telephone Interface, FXO port docking with program-controlled switchboard, FXS port connected to the user’s telephone;
- 1~32channel Voice access, Voice FXO / FXS interface, support for caller ID / reverse polarity billing / fax function;
- Support various sites mutual number allocation function
- Ethernet interface supports10/100M, half/full duplex auto- adaptable, support VLAN
- Ethernet interface can support AUTO-MDIX (crossed line and straightly connected line self-adaptable)
- Telephone interface with lightning protection, lightning reached IEC61000-4-5 Short circuit current wave 8 / 20μs, the peak output voltage 6KV open standards.
- The transmission distance is up to 2-120Km without interruption
- AC 220V, DC-48V, DC24V can be optional
Parameters
♦ Fiber
Multi-mode Fiber
50/125um, 62.5/125um,
Maximum transmission distance: 5Km @ 62.5 / 125um single mode fiber, attenuation (3dbm/km)
Wave Length: 820nm
Transmitting power: -12dBm (Min) ~-9dBm (Max)
Receiver sensitivity: -28dBm (Min)
Link budget: 16dBm
Single-mode Fiber
8/125um, 9/125um
Maximum transmission distance: 40Km
Transmission distance: 40Km @ 9 / 125um single mode fiber, attenuation (0.35dbm/km)
Wave Length: 1310nm
Transmitting power: -9dBm (Min) ~-8dBm (Max)
Receiver sensitivity: -27dBm (Min)
Link budget: 18dBm
♦ E1 Interface
Interface Standard: comply with protocol G.703;
Interface Rate: n*64Kbps±50ppm;
Interface Code: HDB3;
E1 Impedance: 75Ω (unbalance), 120Ω (balance);
Jitter tolerance: In accord with protocol G.742 and G.823
Allowed Attenuation: 0~6dBm
♦ Ethernet interface(10/100M)
Interface rate: 10/100 Mbps, half/full duplex auto-negotiation
Interface Standard: Compatible with IEEE 802.3, IEEE 802.1Q (VLAN)
MAC Address Capability: 4096
Connector: RJ45, support Auto-MDIX
♦ FXS Phone Interface
Ring voltage: 75V
Ring frequency: 25HZ
Two-line Impedance: 600 Ohm (pick up)
Return loss: 40 dB
♦ FXO Switch Interface
Ring detect voltage: 35V
Ring detection frequency: 17HZ-60HZ
Two-line Impedance: 600 Ohm (pick up)
Return loss: 40 dB
Return loss: 20 dB
♦ Working environment
Working temperature: -10°C ~ 50°C
Working Humidity: 5%~95 % (no condensation)
Storage temperature: -40°C ~ 80°C
Storage Humidity: 5%~95 % (no condensation)
Specifications
| Model | Fiber-32Voice +2FE Multiplexer JHA-P32FE02 |
| Functional Description | 32 * telephone，2*100 Mbps Ethernet，1* Fiber interface |
| Power | Power supply: AC180V ~ 260V；DC –48V；DC +24VPower consumption: ≤10W |
| Dimension | Product Size: 485X138X45mm(WXDXH) 19 1U |
| Weight | 2.4KG |
Application
Product detail pictures:
Related Product Guide:
Our progress depends about the advanced products ,fantastic talents and continuously strengthened technology forces for Factory Supply Telephone Fiber Converter - Fiber-32Voice +2FE Multiplexer JHA-P32FE02 – JHA , The product will supply to all over the world, such as: Norwegian, Kazakhstan, Belgium, We adopt advanced production equipment and technology, and perfect testing equipment and methods to ensure our product quality. With our high-level talents, scientific management, excellent teams, and attentive service, our merchandise are favored by domestic and foreign customers. With your support, we'll build a better tomorrow!
By Delia from Buenos Aires - 2018.12.30 10:21
The company can think what our think, the urgency of urgency to act in the interests of our position, can be said this is a responsible company, we had a happy cooperation!
By Anastasia from USA - 2018.06.30 17:29
