Ethernet to E1 Converter
-
16E1 to 4FE GFP interface Converter JHA-CE16F4
The device using reverse direction multiplexing technology to bundle for multiple E1 circuits to transmit the Ethernet data of 4Channel 100BASE-TX.It can realize conversion between 1~16 channel E1 and Ethernet optical interface, to make E1 channels interconnected with Ethernet optical interface.
-
E1-4FE interface Converter JHA-CE1fF4p（Physical lsolation）
This interface converter is based on FPGA. Can realize 4Channel Ethernet data transmission over 1E1 circuits，provide users with Ethernet access at the rate of 1984K.
-
Framed E1-4FE interface Converter JHA-CE1fF4
E1-4ETH interface converter is based on FPGA. The device provides the transition between ITU-T G.703 (E1) standard framed E1 interface and 10/100Base-T interface.
-
E1-2FE interface Converter JHA-CE1fF2p （Physical lsolation）
This interface converter is based on FPGA. Multiplex 10/100Base-T Ethernet 2Channel interface to E1 interface to provide users with Ethernet access at the rate of 1984K.
-
Framed E1-FE interface Converter JHA-CE1fF1
This interface converter is based on FPGA,providing one framed E1 interface and one Ethernet interface to achieve 10/100Base-T Ethernet data transmission on the E1 channel. It is a high performance, self-learning Ethernet bridge.
-
Unframed E1-4FE interface Converter JHA-CE1F4
This protocol converter (interface converter) using large scale FPGA design, ITU-T G.703 standard unframed E1 interfaces and four 10 / 100Base-T Ethernet interface converter, 10 / 100Base-T channels will be transferred to the switch, HUB, routers, bridges, or other device
-
Unframed E1-FE Converter JHA-CE1F1
This interface converter provides one unframed 2048K E1 interface and one Ethernet interface to achieve 10/100Base-T Ethernet data transmission on the E1 channel.
-
8E1-4FE interface Converter JHA-CE8F4 (Logical lsolation)
This interface converter is based on FPGA, using reverse direction multiplexing technology to bundle for multiple E1 circuits to transmit the Ethernet data of 4Channel 100BASE-TX. It can realize 1~8E1 channel to convert between Ethernet optical interface.
-
8E1-1FE interface Converter JHA-CE8F1
This interface converter is based on FPGA, using reverse direction multiplexing technology to bundle for multiple E1 circuits to transmit the Ethernet data of 100BASE-TX. It can realize 1-8E1 channel to convert between Ethernet optical interface.
-
4E1-4FE Interface Converter JHA-CE4F4 (Logical lsolation)
This interface converter is based on FPGA, using reverse direction multiplexing technology to bundle for multiple E1 circuits to transmit the Ethernet data of 4Channel 100BASE-TX.
-
4E1-1FE interface Converter JHA-CE4F1
This interface converter is based on FPGA, using reverse direction multiplexing technology to bundle for multiple E1 circuits to transmit the Ethernet data of 4Channel 100BASE-TX.
-
16*E1 to 3x1000Base-TX+2x1000Base-X Interface Converter JHA-CE16G3F2
The device using reverse direction multiplexing technology to bundle for multiple E1 to transmit the Ethernet data of 3Channel 1000BASE-TX and 2x1000Base-X.
