Chinese Professional Telephone To Fiber Optical Converter - Fiber-16Voice +2FE Multiplexer JHA-P16FE02 – JHA

Fiber-16Voice +2FE Multiplexer JHA-P16FE02

Overview

     This device provides 1-16 Channel telephone,2Channel 10M/100M Ethernet interface (Wire Speed 100M).Equipment electrical part for the whole digital circuits, machine reliability, stability, low power consumption, high integration, small size, easy installation and maintenance.

Photo 

Features

• Based on self -copyright IC;
• Voice port supports FXO and FXS port,Support FXO/FXS, Magnet telephone Interface, FXO port docking with program-controlled switchboard, FXS port connected to the user’s telephone;
• 1~16channel Voice access, Voice FXO / FXS interface, support for caller ID / reverse polarity billing / fax function;
• Support various sites mutual number allocation function;
• Ethernet interface supports10/100M, half/full duplex auto- adaptable;
• AC 220V, DC-48V, DC24V can be optional;
• Telephone interface with lightning protection, lightning reached IEC61000-4-5 Short circuit current wave 10 / 700μs, the peak output voltage 6KV open standards.

Parameters

♦  Fiber

Multi-mode Fiber

50/125um, 62.5/125um,

Maximum transmission distance:          5Km @ 62.5 / 125um single mode fiber, attenuation (3dbm/km)

Wave Length:                                                820nm

Transmitting power:                               -12dBm (Min) ~-9dBm (Max)

Receiver sensitivity:                               -28dBm (Min)

Link budget:                                           16dBm

Single-mode Fiber

8/125um, 9/125um

Maximum transmission distance:          40Km

Transmission distance:                                  40Km @ 9 / 125um single mode fiber, attenuation (0.35dbm/km)

Wave Length:                                                1310nm

Transmitting power:                               -9dBm (Min) ~-8dBm (Max)

Receiver sensitivity:                               -27dBm (Min)

Link budget:                                           18dBm

♦  FXS Phone Interface

Ring voltage:                            75V

Ring frequency:                        25HZ

Two-line Impedance:               600 Ohm (pick up)

Return loss:                              20 dB

♦  FXO Switch Interface

Ring detect voltage:                 35V

Ring detection frequency:    17HZ-60HZ 

Two-line Impedance:               600 Ohm (pick up)

Return loss:                         20 dB

♦  Ethernet interface(10/100M)

Interface rate:                           10/100 Mbps, half/full duplex auto-negotiation

Interface Standard:               Compatible with IEEE 802.3, IEEE 802.1Q

MAC Address Capability: 4096

Connector:                             RJ45, support Auto-MDIX

♦  Electrical and mechanical characteristics

System power supply ：          AC180V ～260V；DC –48V；DC +24V

Power waste ：                        ≤5W

Size:                        (L×W×H)  485*138*45mm 19inch

♦  Working environment

Working temperature:                 -10°C ~ 50°C

Working Humidity:                    5%~95 % (no condensation)

Storage temperature:           -40°C ~ 80°C

Storage Humidity:                      5%~95 % (no condensation)

MTBF：                   ＞100,000 hours

Specifications

Application