China Wholesale Ethernet Switc Factory Suppliers - 4 10/100/1000TX PoE/PoE+ and 2 1000X SFP Slot | Managed Industrial PoE Switch JHA-MIGS24P – JHA
China Wholesale Ethernet Switc Factory Suppliers - 4 10/100/1000TX PoE/PoE+ and 2 1000X SFP Slot | Managed Industrial PoE Switch JHA-MIGS24P – JHA Detail:
Features
♦ Support 4 10/100/1000Base-T(X) PoE/PoE+ port and 2 1000Base-X SFP slot.
♦ Support G.8032(ERPS), IEEE802.3, IEEE802.3u, IEEE802.3z, IEEE802.3x, IEEE802.3ad, IEEE802.3ab, IEEE802.3af/at, IEEE802.1p, IEEE802.1x, IEEE802.1Q, IGMP Snooping, IPv4/IPv6 precedence.
♦ Support CLI, SNMP, WEB management, Console/Telnet command-line management and syslog, using self-developed ring network technology, recovery time <20ms.
♦ DC48-58V redundancy power, reverse polarity protection.
♦ Support PoE/PoE+, IEEE802.3af: max 15.4W, IEEE802.3at: max 30W.
Introduction
JHA-MIGS24P is a high performance, cost-effective high-end managed industrial PoE switch. The switch provides 4 10/100/1000Base-T(X) PoE/PoE+ port and 2 1000Base-X SFP slot. Each port has a PoE function, especially for difficult to provide AC power and wiring costs demanding application scenarios, automatically adapt to IEEE 802.3af/at standard.
The use of a Ring technology (network fault recovery <20ms) the user can easily set the redundant ring network to increase network reliability, it also support WEB, CLI, Telnet/serial console, Windows utility, and SNMP management of a variety of ways, rich QoS features for data traffic control and management, support ring protocol, RSTP and STP Ethernet redundancy support port-based VLAN, IEEE 802.1Q VLAN and GVRP protocol. The product also industrial design, and can be widely used in automotive PIS, CCTV, video surveillance systems, train control system, but also applies to any vibration shock, EMC compatibility requirements of harsh industrial applications, can meet a variety of industrial site requirements to achieve higher reliability.
Specification
|
Protocol Standard |
G.8032(ERPS), IEEE802.3, IEEE802.3u, IEEE802.3z, IEEE802.3x, IEEE802.3ad, IEEE802.3ab, IEEE802.3af/at, IEEE802.1p, IEEE802.1x, IEEE802.1Q, IGMP Snooping, IPv4/IPv6 precedence |
|
Switching Performance |
Forwarding Rate: 17.856MppsTransmission Mode: Store and ForwardPacket Buffer Size: 12MBackplane Bandwidth: 24GbpsMAC Table Size: 16K Priority Queues: 8
Delay Time: < 10μs |
|
Ring Network Management |
Bandwidth Management: outbound port speed, speed limit particle size: 0 - 1G, step 100kbps |
|
Expanding Ring Back: based on port, support link aggregation/LACP, support load balancing, support port protection, Spanning Tree Protocol: STP, RSTP, MSTP |
|
| System Upgrade: support under BOOTROM Xmodem/TFTP upgrade, support for system files and upload and upgrade configuration files | |
| User Management: Hierarchical user and password protection, port septum away, broken fiber alarm, power failure alarm | |
| System Maintenance: the optical module diagnostics, ping, port system count, support ERPS, ring protection switching time<20ms, with QOS traffic classification, priority level of trust, SP, WRR queue scheduling, support streaming strategies, suppression, support SNMP network pipe, support CLI/SNMP/WEB management, support Console and Telnet command line management and syslog | |
|
Ethernet Port |
10/100/1000Base-T(X) auto speed control, full/half duplex and MDI/MDI-X auto-adaptation |
|
Fiber Port |
1000Base-X SFP slot |
|
PoE |
Pin-out: 1/2(+), 3/6(-), IEEE802.3af max 15.4w, IEEE802.3at max 30w. |
|
LED Indicator |
Power Indicator: PWRPort Indicator: LINK / ACT |
|
Power Supply |
Input Voltage: DC48-58VConnector: 6 bit 5.08mm removable terminal blockFull Load: <10W Protection Mechanism: overload protection, reverse connection protection, redundancy protection |
|
Mechanical Structure |
Shell: IP40 protection, aluminum alloy housingDimension: 143*104*48mm( L*W*H )Weight: 550gInstallation: DIN-Rail mounting, wall mounting |
|
Operating Environment |
Operating Temperature: -40-85°CStorage Temperature: -40-85°CAmbient Relative Humidity: 5%-95% (non-condensing) |
|
Industry Standards |
EMI:FCC Part 15 Subpart B Class A, EN 55022 Class AEMS:EN61000-4-2 (ESD), Level 4 at 15kV(Air), 8kV(Contact)EN61000-4-3 (R/S), Level 3 at 10V/mEN61000-4-4 (EFT), Level 4 at 4kV(Power Port), 2kV(Date Port)EN61000-4-5 (Surge), Level 4 at 4kVEN61000-4-6 (CS), Level 3 at 10V/m
EN61000-4-8, Level 5 at 100A/m Shock:IEC 60068-2-27 Free Fall:IEC 60068-2-32 Vibration:IEC 60068-2-6 |
|
Certification |
CE, FCC, RoHS |
|
MTBF |
>100,000 Hours |
|
Warranty |
5-years |
Dimension
Order Information
|
Model No. |
Description of Goods |
|
JHA-MIGS24P |
Managed Industrial PoE Switch, 4 10/100/1000Base-T(X) PoE/PoE+ and 2 1000Base-X SFP Slot, DIN-Rail, DC48-58V, -40-85°C Operating Temperature |
| Power Supply: DC48V DIN-Rail Power Supply or Power Adapter is Optional. | |
Product detail pictures:
Related Product Guide:
Our enterprise insists all along the standard policy of product high-quality is base of business survival; client satisfaction could be the staring point and ending of an business; persistent improvement is eternal pursuit of staff as well as consistent purpose of reputation first, client first for China Wholesale Ethernet Switc Factory Suppliers - 4 10/100/1000TX PoE/PoE+ and 2 1000X SFP Slot | Managed Industrial PoE Switch JHA-MIGS24P – JHA , The product will supply to all over the world, such as: panama, Mozambique, Philippines, Our company has already had a lot of excellent factories and professional technology teams in China, offering high quality products, techniques and services to worldwide customers. Honesty is our principle, professional operation is our work, service is our goal, and customers' satisfaction is our future!
By Molly from Cannes - 2017.08.18 11:04
The company's products can meet our diverse needs, and the price is cheap, important is that the quality is also very nice.
By Page from Palestine - 2017.05.21 12:31
