China wholesale 1+1 Fiber Back-Up Pdh - 8E1+4FE(Physical isolation) JHA-CPE8WF4 PDH Fiber Multiplexer – JHA

Short Description:

Overview

Feedback (2)

Download

As a way to ideal meet up with client's desires, all of our operations are strictly performed in line with our motto High high quality, Competitive Cost, Fast Service for Pdh Mux , 2 Poe Port Switch , Fiber Mux , We are sincerely looking forward to cooperate with buyers all around the world. We imagine we will satisfy you. We also warmly welcome shoppers to visit our organization and purchase our merchandise.

China wholesale 1+1 Fiber Back-Up Pdh - 8E1+4FE(Physical isolation) JHA-CPE8WF4 PDH Fiber Multiplexer – JHA Detail:

8E1+4FE(Physical isolation) JHA-CPE8WF4

PDH Fiber Multiplexer

Overview

This series of equipment is the company developed the PDH fiber transmission dedicated VLSI developed on the basis of point to point optical transmission equipment. Provide 1-8 E1 interfaces, primary and backup fiber optical interface connector, 1-4 physical isolation 10/100M Fast Ethernet interface (independent four-wire speed 100M,total bandwidth is 4*100M), as well as two business expansion interface. 2 Extended service interface can be used as RS232 / RS485 / RS422 asynchronous data , the application is very flexible. Optional one digital service telephone, the application is very flexible. With a sound alarm function, the whole stable, reliable, low power consumption, high integration, small size.

Product Photo

Features

Based on self-copyright IC
1-4 physical isolation 10/100M Fast Ethernet interface , every FE Ethernet independent wire speed is 100M,total bandwidth is 4*100M;
Provide Console manage interface (RS232)
Provide two fiber interface 1+1 protect（APS）function
Ethernet interface rate is 10/100M, half/full duplex Auto-Nego
Ethernet package support jumbo frames,up to 10240 byte
E1 interface comply with G.703, adopts digital clock recovery and smooth phase-lock technology
Uses standard 2 wire telephone (non-telephone handles) set as engineering order-wire hotline(optional)
When optical lose signal, it can detect the remote device is power off or fiber is disconnected, and indicates alarm by LED
The local device can view the remote device working condition
Provide command the remote interface Loop Back, support local E1 Loop Back function, support E1 LOS and AIS alarm ,ease line maintenance
The transmission distance is up to 2-100Km without interruption
Support SNMP manager (SNMP agent inside)
AC 220V, DC-48V, DC24V can be optional
DC-48V/DC24V power supply polarity detection function, Polarity-Free

Parameters

♦ Fiber

Multi-mode Fiber

50/125um, 62.5/125um,

Maximum transmission distance: 5Km @ 62.5 / 125um single mode fiber,attenuation (3dbm/km)

Wave Length: 820nm

Transmitting power: -12dBm (Min) ~-9dBm (Max)

Receiver sensitivity: -28dBm (Min)

Link budget: 16dBm

Single-mode Fiber

8/125um, 9/125um

Maximum transmission distance: 40Km

Transmission distance: 40Km @ 9 / 125um single mode fiber, attenuation (0.35dbm/km)

Wave Length: 1310nm

Transmitting power: -9dBm (Min) ~-8dBm (Max)

Receiver sensitivity: -27dBm (Min)

Link budget: 18dBm

u E1 Interface

Interface Standard: comply with protocol G.703;
Interface Rate: 2048Kbps±50ppm;
Interface Code: HDB3;

E1 Impedance: 75Ω (unbalance), 120Ω (balance);

Jitter tolerance: In accord with protocol G.742 and G.823

Allowed Attenuation: 0~6dBm

♦ Ethernet interface (10/100M)

Interface rate: 10/100 Mbps, half/full duplex auto-negotiation

Interface Standard: Compatible with IEEE 802.3, IEEE 802.1Q (VLAN)

MAC Address Capability: 4096

Connector: RJ45, support Auto-MDIX

♦ Working environment

Working temperature: -10°C ~ 50°C

Working Humidity: 5%~95 % (no condensation)

Storage temperature: -40°C ~ 80°C

Storage Humidity: 5%~95 % (no condensation)

Specifications

Model	Model Number: JHA-CPE8WF4
Functional Description	8E1 PDH， 4 * Ethernet physical isolation（total Band width 4*100M），order wire phone，19”inch 1U，with Console , SNMP，1+1 Back up Optic fiber
Port Description	1+1 optical port, 8E1 interfaces (75/120ohms), 4 FE interfaces,1RS232 Console interface,1*SNMP Ethernet interface, one engineering order-wire telephone interface
Power	Power supply: AC180V ~ 260V；DC –48V；DC +24V Power consumption: ≤10W
Dimension	Product Size: 19 inch 1U 483X138X45mm(WXDXH)
Weight	3KG

Application

Product detail pictures:

Related Product Guide:

abide by the contract, conforms to the market requirement, joins during the market competition by its superior quality also as provides extra comprehensive and exceptional service for consumers to let them turn into significant winner. The pursue of the business, is definitely the clients' gratification for China wholesale 1+1 Fiber Back-Up Pdh - 8E1+4FE(Physical isolation) JHA-CPE8WF4 PDH Fiber Multiplexer – JHA , The product will supply to all over the world, such as: Switzerland, Accra, Holland, we have 8 years experience of production and 5 years experience in trading with the customers all over the world. our clients mainly distributed in the North America, Africa and Eastern Europe. we can supply high quality products with the very competitive price.