Cheapest Factory Fiber Core Switch 8*Giga SFP +4*10g SFP Plus Ethernet Switch
To be a result of ours specialty and service consciousness, our company has won a superb reputation between customers all around the environment for Cheapest Factory Fiber Core Switch 8*Giga SFP +4*10g SFP Plus Ethernet Switch, We have been searching ahead to even better cooperation with overseas buyers dependant on mutual benefits. Be sure to really feel totally free to speak to us for additional element!
To be a result of ours specialty and service consciousness, our company has won a superb reputation between customers all around the environment for China L3 Switch and 10g Switch price, High output volume, top quality, timely delivery and your satisfaction are guaranteed. We welcome all inquiries and comments. We also present agency service—that act as the agent in china for our customers. If you are interested in any of our products and solutions or have an OEM order to fulfill, make sure you feel free to contact us now. Working with us will save you money and time.
Features
* Support 8 10/100/1000Base-T(X) port and 2 10G SFP+ Slot and 1 Console Port.
* Rich QoS features for data flow control and management, support ring protocol, RSTP and STP Ethernet redundancy, support port-based VLAN, IEEE 802.1Q VLAN and GVRP protocol.
* Support CLI, SNMP, WEB VLAN management, Console/Telnet command-line management and syslog, using self-developed ring network technology, recovery time <20ms.
* DC10-58V redundancy power, reverse polarity protection.
* Industrial grade 4 design, -40-85°C operating temperature.
* IP40 rated aluminum alloy housing, DIN-Rail mounted.
Introduction
The JHA-MIWS28H series is a high-performance, cost-effective, high-end intelligent gigabit managed ring network industrial-grade optical fiber switch. Support 2 10G optical ports (SFP slots) + 8 10/100/1000Base-T(X) port. It adopts the self-developed JHA-RING ring network technology (network failure self-healing time <20ms), users can easily set a redundant ring network to increase network reliability, and also supports CLI, SNMP, WEB, VLAN management, support Console/Telnet command line management. Rich QoS features for data flow control and management, support ring protocol, RSTP and STP Ethernet redundancy, support port-based VLAN, IEEE 802.1Q VLAN and GVRP protocol. The product also uses fanless, low power consumption, industrial-grade design, can adapt to harsh industrial environments, and has an operating temperature range of -40 to 85°C, which can meet the requirements of various industrial sites.
Specification
Interface | |
Fiber Port | 2*10G SFP+ |
Ethernet Port | 8*10/100/1000 Base-T |
Manage Port | 1*RJ45 Console port |
Power connector | 3P Phoenix terminal, dual power supply redundancy |
LED Indicator | PWR (green);System indicator:SYS(green);
Network port indicator:yellow(1000 or POE) Green (Link) |
Cable type and distance | |
Twisted pair cable | 0-100m (CAT5e, CAT6) |
Single-mode fiber | 20/40/60/80/100KM |
Multimode fiber | 550m/2KM |
Optical fiber interface | LC/SC |
Network topology & scale | |
Ring topology | Support |
Star topology | Support |
Bus topology | Support |
Tree topology | Support |
Hybrid topology | Support |
Electrical characteristics | |
Input voltage | DC10-58V/DC48-58V |
Power consumption | Non-POE full load (Total power) <10WPOE full load <132W |
PoE Support(Optional) | |
PoE ports | 1-8 |
PoE protocol | 802.3af, 802.3at |
PoE pin assignment | 1,2,3,6 |
PoE management mode | Support |
L2 Features | |
Exchange capacity | 64G |
Packet forwarding rate | 47.6Mpps |
MAC address table | 16K |
VLAN support and quantity | Support 4K |
Report buffer | 12M |
Forwarding delay | <10us |
Port characteristics | Cross-connect and direct-adaptive |
Flow control | Support |
Jumbo frame support | Support10Kbytes |
Spanning Tree Protocol | Support STP/RSTP/MSTP |
Ring network protocol | Support ERPS |
Link aggregation | Support 12 groups |
Multicast | Support IGMP Snooping |
Port mirroring | Support |
Storm suppression | Support |
Port traffic statistics | Support |
Port flow system | Support |
QINQ | Support |
Protection |
Shell: IP40 protection, aluminum alloy housingIEC 61000-4-5 Level 3 (4KV/2KV) (8/20us)
IEC 61000-4-5 Level 3 (6KV/2KV) (10/700us) IEC 61000-4-3 Level 3 (10V/m) IEC 61000-4-4 Level 3 (1V/2V) IEC 61000-4-6 Level 3 (10V/m) IEC 61000-4-8 Level4 (30A/m) IEC 61000-4-11 Level3 (10V) EMI CLASS A IEC 61000-4-2 Level 4 (15KV/30KV) Free fall 0.5m |
Convergence Service | |
ACL | Support 500 ACLs;Support IP standard ACL;
Support MAC extended ACL; Support IP extended ACL; |
QoS | Support QoS re-marking and priority mapping;Support SP, WRR queue scheduling;
Support entry speed limit and exit speed limit; Support flow-based QoS |
Management function | |
Command line | Support |
Management serial port | Support |
Telnet | Support |
WEB management | Support |
SNMP | Support SNMPv1/v2c |
User management | Support |
System log | Support |
File upgrade | Support |
Firmware upgrade | Support |
SFP module DDM | Support |
Environmental conditions |
Working temperature | -40℃~+85℃ |
Storage/transport temperature | -40℃~+85℃ |
Relative humidity | 5%~95% does not support condensation (non-condensing) |
Cooling method | No fan design, natural heat dissipation |
MTBF | 100,000 hours |
Mechanical structure | |
Size | 181X146X47mm |
Installation method | DIN Rail Installation |
Weight | 1KG |
Dimension
Order Information
Model No. |
Description of Goods |
JHA-MIWS2G08H |
Managed Industrial Ethernet Switch, 2 10G SFP+ Slot and 8 10/100/1000Base-T(X), DIN-Rail, DC10-58V, -40-85°C Operating Temperature |
JHA-MIWS2G08HP |
Managed Industrial PoE Switch, 2 10G SFP+ Slot and 8 10/100/1000Base-T(X) PoE/PoE+ DIN-Rail, DC48-58V, -40-85°C Operating Temperature |
Power Supply: DC24V DIN-Rail Power Supply or Power Adapter is Optional.(Non-PoE) DC48V DIN-Rail Power Supply or Power Adapter is Optional.(PoE) |