16*100/1000mbps POE Port+2*100/1000mbps UP Link Port+2*100/1000mbps SFP Port | Smart PoE Switch JHA-P422016BHGW

Short Description:

* 16*10/100/1000M + 2*10/100/1000M RJ45 Port +2*1000M SFP Slot Smart PoE Switch,1-16 ports support IEEE 802.3af/at;
* Comply with IEEE 802.3, IEEE 802.3u standards;
* PoE port support AF/AT intelligent recognition. Standard power is 15.4W/port, Maximum power: 30W/port;
* Supports POE devices such as wireless access points (APs) and network surveillance cameras through Category 5/6 Ethernet cables;
* The power supply total is 250W;
* 3 years warranty.


Overview

Related Video

Feature

Specification

Dimension

Order Information

Download

Introduction

The JHA-P422016BHGW is a full gigabit unmanaged PoE fiber switch. It has 18*10/100/1000M adaptive RJ45 ports and 2*1000M SFP slot ports. Port 1-16 can support IEEE802.3af/at PoE standard. Single-port PoE power reaches 30W, and the maximum PoE output power is 250W (at-400W). As a PoE power supply device, it can automatically detect and recognize the power receiving equipment that meets the standard and supply power through the network cable. It can supply power to POE terminal equipment such as wireless AP, webcam, VoIP phone, building visual access control intercom, etc. through network cable, to meet the network environment that needs high-density PoE power supply. It is suitable for hotel, campus, factory dormitory and small and medium-sized enterprise. Unmanaged model, plug and play, no configuration, easy to use.

 


  • Previous:
  • Next:

  • Feature

    ◇ Full gigabit access

    * Support non-blocking wire-speed forwarding.

    * Support full-duplex based on IEEE802.3x and half-duplex based on Backpressure.

    * Support gigabit Ethernet port and gigabit SFP fiber port combination, which enables users to flexibly build networking to meet the needs of various scenarios.

    ◇ Intelligent PoE power supply

    * IEEE802.3af/at PoE standard, without damaging non-PoE devices.

    * Priority system for PoE port, it will supply power to the high priority level port first when the power budget is insufficient and avoid overwork of the device.

    * 16*10/100/1000Base-T RJ45 ports can support POE power to meet the needs of security monitoring, teleconferencing system, wireless coverage, and other scenarios.

    ◇ Stable and reliable

    * CCC, CE, FCC, RoHS.

    * The user-friendly panel can show the device status through the LED indicator of PWR, Link, PoE.

    * Self-developed power supply, high redundancy design, providing a long term and stable PoE power output.

    * Low power consumption, galvanized steel shell, with fan super heat dissipation to ensure stable operation of the product.

    Specification

    Model

    JHA-P422016BHGW

    JHA-P422016BTHGW

    Interface Characteristics

    Fixed Port

    16*10/100/1000Base-T PoE ports (Data /Power)

    2*10/100/1000Base-T uplink RJ45 ports (Data)

    2*1000Base-X uplink SFP slot ports (Data)

    Ethernet Port

    Port 1-16 can support 10/100/1000Base-T auto-sensing, full/half duplex MDI/MDI-X

    Twisted Pair Transmission

    10BASE-T: Cat3,4,5 UTP(≤100 meters)

    100BASE-TX: Cat5 or later UTP(≤100 meters)

    1000BASE-T: Cat5e or later UTP(≤100 meters)

    SFP Slot Port

    Gigabit SFP optical fiber port, default no include optical modules (optional order single-mode/ multi-mode, single fiber / dual fiber optical module. LC)

    Optical Cable/ Distance

    Multi-mode:850nm/ 0-500M, Single-mode:1310nm/ 0-40KM, 1550nm/ 0-120KM.

    Chip Parameter

    Network Protocol

    IEEE802.3 10BASE-T, IEEE802.3i 10Base-T, IEEE802.3u 100Base-TX

    IEEE802.3ab 1000Base-T, IEEE802.3z 1000Base-X, IEEE802.3x

    Forwarding Mode

    Store and Forward(Full Wire Speed)

    Switching Capacity

    56Gbps (Non-blocking)

    Forwarding

    Rate@64byte

    29.76Mpps

    MAC

    8K

    Buffer Memory

    4M

    Jumbo Frame

    9.6K

    LED Indicator

    Power: PWR (Green),  Network: Link, Link/Act (Yellow),

    PoE: PoE(Green), Fiber port: L/A (Green), Speed: SPD(Green)

    Reset Switch

    Yes, One-button factory reset

    PoE & Power Supply

    PoE Port

    Port 1 to 16

    Power Supply Pin

    1/2(+) 3/6(-)

    Max Power Per Port

    30W, IEEE802.3af/at

    Total PWR / Input Voltage

    250W (AC100-240V)

    400W (AC100-240V)

    Power Consumption

    Standby<15W, Full Load<240W

    Standby<16W, Full Load<380W

    Power Supply

    Built-in power supply AC100~240V 50-60Hz 4.1A

    Built-in power supply

    AC100~240V 50-60Hz 5.0A

    Physical Parameter

    Operation TEMP / Humidity

    -20~+55°C, 5%~90% RH Non condensing

    Storage TEMP / Humidity

    -40~+75°C, 5%~95% RH Non condensing

    Dimension (L*W*H)

    440*290*44.5mm

    Net /Gross Weight

    <3.3kg /<4.0kg

    <3.6kg /<4.5kg

    Installation

    Desktop, wall-mount, 19″ 1U rack-mount

    Certification & Warranty

    Lightning Protection

    Lightning protection: 4KV 8/20us, Protection level: IP30

    Certification

    CCC, CE mark, commercial, CE/LVD EN62368-1, FCC Part 15 Class B, RoHS

    Warranty

    3 years

    Dimension

    JHA size

    Order Information

    Model

    Description

    Built-in Power Supply

    JHA-P422016BHGW

    Unmanaged PoE fiber switch with 18*10/100/1000M RJ45 ports and 2*1000M uplink SFP ports. Port 1-16 can support IEEE802.3af/at PoE standard. Support 19″ 1U rack-mount installation.

    250W

    JHA-P422016BTHGW

    400W

    Note: The SFP optical module is not included by default and needs to be purchased separately.

  • pdf
    JHA-P422016BHGW Datasheet
    pdf
  • Write your message here and send it to us