8 10/100/1000TX PoE/PoE+ And 4 1G/10G SFP+ Slot | L2/L3 Industrial PoE Switch JHA-MIWS4G08HP
Features:
•Support 8 10/100/1000Base-T(X) port and 4 1G/10G SFP+ Slot and 1 Console Port.
•Rich QoS features for data flow control and management, support ring protocol, RSTP and STP Ethernet redundancy, support port-based VLAN, IEEE 802.1Q VLAN and GVRP protocol.
•Support CLI, SNMP, WEB VLAN management, Console/Telnet command-line management and syslog, using self-developed ring network technology, recovery time <20ms.
•DC10-58V redundancy power, reverse polarity protection.
•Industrial grade 4 design, -40-85°C operating temperature.
•IP40 rated aluminum alloy housing, DIN-Rail mounted.
Introduction:
The JHA-MIWS4G08H series is a high-performance, cost-effective, high-end intelligent gigabit managed ring network industrial-grade optical fiber switch. Support 4 1G/10G optical ports (SFP slots) + 8 10/100/1000Base-T(X) port. It adopts the self-developed JHA-MIWS4G08H ring network technology (network failure self-healing time <20ms), users can easily set a redundant ring network to increase network reliability, and also supports CLI, SNMP, WEB, VLAN management, support Console/Telnet command line management. Rich QoS features for data flow control and management, support ring protocol, RSTP and STP Ethernet redundancy, support port-based VLAN, IEEE 802.1Q VLAN and GVRP protocol. The product also uses fanless, low power consumption, industrial-grade design, can adapt to harsh industrial environments, and has an operating temperature range of -40 to 85°C, which can meet the requirements of various industrial sites.
Specification:
| Interface | |
| Fiber Port | 4*1G/10G SFP+ |
| Ethernet Port | 8*10/100/1000 Base-T |
| Manage Port | 1*RJ45 Console port |
| Power connector | 3P Phoenix terminal, dual power supply redundancy |
| LED Indicator | PWR (green);System indicator:SYS(green);Network port indicator:yellow(1000 or POE) Green (Link) |
| Cable type and distance | |
| Twisted pair cable | 0-100m (CAT5e, CAT6) |
| Single-mode fiber | 20/40/60/80/100KM |
| Multimode fiber | 550m/2KM |
| Optical fiber interface | LC/SC |
| Network topology & scale | |
| Ring topology | Support |
| Star topology | Support |
| Bus topology | Support |
| Tree topology | Support |
| Hybrid topology | Support |
| Electrical characteristics | |
| Input voltage | DC10-58V/DC48-58V |
| Power consumption | Non-POE full load (Total power) <10WPOE full load <132W |
| PoE Support(Optional) | |
| PoE ports | 1-8 |
| PoE protocol | 802.3af, 802.3at |
| PoE pin assignment | 1,2,3,6 |
| PoE management mode | Support |
| L2 Features | |
| Exchange capacity | 160G |
| Packet forwarding rate | 95.23Mpps |
| MAC address table | 16K |
| VLAN support and quantity | Support 4K |
| Report buffer | 12M |
| Forwarding delay | <10us |
| Port characteristics | Cross-connect and direct-adaptive |
| Flow control | Support |
| Jumbo frame support | Support10Kbytes |
| Spanning Tree Protocol | Support STP/RSTP/MSTP |
| Ring network protocol | Support ERPS |
| Link aggregation | Support 12 groups |
| Multicast | Support IGMP Snooping |
| Port mirroring | Support |
| Storm suppression | Support |
| Port traffic statistics | Support |
| Port flow system | Support |
| QINQ | Support |
| Protection | Shell: IP40 protection, aluminum alloy housingIEC 61000-4-5 Level 3 (4KV/2KV) (8/20us)IEC 61000-4-5 Level 3 (6KV/2KV) (10/700us)IEC 61000-4-3 Level 3 (10V/m)IEC 61000-4-4 Level 3 (1V/2V)IEC 61000-4-6 Level 3 (10V/m)IEC 61000-4-8 Level4 (30A/m)
IEC 61000-4-11 Level3 (10V) EMI CLASS A IEC 61000-4-2 Level 4 (15KV/30KV) Free fall 0.5m |
| Convergence Service | |
| ACL | Support 500 ACLs;Support IP standard ACL;Support MAC extended ACL;Support IP extended ACL; |
| QoS | Support QoS re-marking and priority mapping;Support SP, WRR queue scheduling;Support entry speed limit and exit speed limit;Support flow-based QoS |
| Management function | |
| Command line | Support |
| Management serial port | Support |
| Telnet | Support |
| WEB management | Support |
| SNMP | Support SNMPv1/v2c |
| User management | Support |
| System log | Support |
| File upgrade | Support |
| Firmware upgrade | Support |
| SFP module DDM | Support |
| Environmental conditions | |
| Working temperature | -40℃~+85℃ |
| Storage/transport temperature | -40℃~+85℃ |
| Relative humidity | 5%~95% does not support condensation (non-condensing) |
| Cooling method | No fan design, natural heat dissipation |
| MTBF | 100,000 hours |
| Mechanical structure | |
| Size | 181X146X47mm |
| Installation method | DIN Rail Installation |
| Weight | 1KG |
Dimension
Order Information
|
Model No. |
Description of Goods |
|
JHA-MIWS4G08H |
Managed Industrial Ethernet Switch, 4 10G SFP+ Slot and 8 10/100/1000Base-T(X), DIN-Rail, DC10-58V, -40-85°C Operating Temperature |
|
JHA-MIWS4G08HP |
Managed Industrial PoE Switch, 4 10G SFP+ Slot and 8 10/100/1000Base-T(X) PoE/PoE+ DIN-Rail, DC48-58V, -40-85°C Operating Temperature |
|
Power Supply: DC24V DIN-Rail Power Supply or Power Adapter is Optional.(Non-PoE) DC48V DIN-Rail Power Supply or Power Adapter is Optional.(PoE) |
|













