8 Port 1000M L2/L3 MANAGED INDUSTRIAL ETHERNET SWITCH with 4 10G SFP+ Slot | JHA-MIWS4G08H
Introduction
The JHA-MIWS4G08H series is a high-performance, cost-effective, high-end intelligent gigabit managed ring network industrial-grade optical fiber switch. Support 4 1G/10G optical ports (SFP slots) + 8 10/100/1000Base-T(X) port. It adopts the self-developed JHA-MIWS4G08H ring network technology (network failure self-healing time <20ms), users can easily set a redundant ring network to increase network reliability, and also supports CLI, SNMP, WEB, VLAN management, support Console/Telnet command line management. Rich QoS features for data flow control and management, support ring protocol, RSTP and STP Ethernet redundancy, support port-based VLAN, IEEE 802.1Q VLAN and GVRP protocol. The product also uses fanless, low power consumption, industrial-grade design, can adapt to harsh industrial environments, and has an operating temperature range of -40 to 85°C, which can meet the requirements of various industrial sites.
Features:
* Support 8 10/100/1000Base-T(X) port and 4 1G/10G SFP+ Slot and 1 Console Port.
* Rich QoS features for data flow control and management, support ring protocol, RSTP and STP Ethernet redundancy, support port-based VLAN, IEEE 802.1Q VLAN and GVRP protocol.
* Support CLI, SNMP, WEB VLAN management, Console/Telnet command-line management and syslog, using self-developed ring network technology, recovery time <20ms.
* DC10-58V redundancy power, reverse polarity protection.
* Industrial grade 4 design, -40-85°C operating temperature.
* IP40 rated aluminum alloy housing, DIN-Rail mounted.
Specifications
| Interface | |
| Fiber Port | 4*1G/10G SFP+ | 
| Ethernet Port | 8*10/100/1000 Base-T | 
| Manage Port | 1*RJ45 Console port | 
| Power connector | 3P Phoenix terminal, dual power supply redundancy | 
| LED Indicator | PWR (green); System indicator:SYS(green); Network port indicator:yellow(1000 or POE) Green (Link) | 
| Cable type and distance | |
| Twisted pair cable | 0-100m (CAT5e, CAT6) | 
| Single-mode fiber | 20/40/60/80/100KM | 
| Multimode fiber | 550m/2KM | 
| Optical fiber interface | LC/SC | 
| Network topology & scale | |
| Ring topology | Support | 
| Star topology | Support | 
| Bus topology | Support | 
| Tree topology | Support | 
| Hybrid topology | Support | 
| Electrical characteristics | |
| Input voltage | DC10-58V/DC48-58V | 
| Power consumption | Non-POE full load (Total power) <10W POE full load <132W | 
| PoE Support(Optional) | |
| PoE ports | 1-8 | 
| PoE protocol | 802.3af, 802.3at | 
| PoE pin assignment | 1,2,3,6 | 
| PoE management mode | Support | 
| L2 Features | |
| Exchange capacity | 160G | 
| Packet forwarding rate | 95.23Mpps | 
| MAC address table | 16K | 
| VLAN support and quantity | Support 4K | 
| Report buffer | 12M | 
| Forwarding delay | <10us | 
| Port characteristics | Cross-connect and direct-adaptive | 
| Flow control | Support | 
| Jumbo frame support | Support10Kbytes | 
| Spanning Tree Protocol | Support STP/RSTP/MSTP | 
| Ring network protocol | Support ERPS | 
| Link aggregation | Support 12 groups | 
| Multicast | Support IGMP Snooping | 
| Port mirroring | Support | 
| Storm suppression | Support | 
| Port traffic statistics | Support | 
| Port flow system | Support | 
| QINQ | Support | 
| 
 
 
 
 Protection | Shell: IP40 protection, aluminum alloy housing IEC 61000-4-5 Level 3 (4KV/2KV) (8/20us) IEC 61000-4-5 Level 3 (6KV/2KV) (10/700us) IEC 61000-4-3 Level 3 (10V/m) IEC 61000-4-4 Level 3 (1V/2V) IEC 61000-4-6 Level 3 (10V/m) IEC 61000-4-8 Level4 (30A/m) IEC 61000-4-11 Level3 (10V) EMI CLASS A IEC 61000-4-2 Level 4 (15KV/30KV) Free fall 0.5m | 
| Convergence Service | |
| ACL | Support 500 ACLs; Support IP standard ACL; Support MAC extended ACL; Support IP extended ACL; | 
| QoS | Support QoS re-marking and priority mapping; Support SP, WRR queue scheduling; Support entry speed limit and exit speed limit; Support flow-based QoS | 
| Management function | |
| Command line | Support | 
| Management serial port | Support | 
| Telnet | Support | 
| WEB management | Support | 
| SNMP | Support SNMPv1/v2c | 
| User management | Support | 
| System log | Support | 
| File upgrade | Support | 
| Firmware upgrade | Support | 
| SFP module DDM | Support | 
| Environmental conditions | |
| Working temperature | -40℃~+85℃ | 
| Storage/transport temperature | -40℃~+85℃ | 
| Relative humidity | 5%~95% does not support condensation (non-condensing) | 
| Cooling method | No fan design, natural heat dissipation | 
| MTBF | 100,000 hours | 
| Mechanical structure | |
| Size | 181X146X47mm | 
| Installation method | DIN Rail Installation | 
| Weight | 1KG | 
Dimension
Order Information
| Model No. | Description of Goods | 
| JHA-MIWS4G08H | Managed Industrial Ethernet Switch, 4 10G SFP+ Slot and 8 10/100/1000Base-T(X), DIN-Rail, DC10-55V, -40-85°C Operating Temperature, L2/L3 Optional | 
| JHA-MIWS4G08HP | Managed Industrial PoE Switch, 4 10G SFP+ Slot and 8 10/100/1000Base-T(X) PoE/PoE+ DIN-Rail, DC48-55V, -40-85°C Operating Temperature,L2/L3 Optional. | 
| Power Supply: DC24V DIN-Rail Power Supply or Power Adapter is Optional.(Non-PoE) DC48V DIN-Rail Power Supply or Power Adapter is Optional.(PoE) | |

 













 
 
 
 
