24*100/1000mbps POE Port+2*100/1000mbps UP Link Port+2*100/1000mbps SFP Port | Smart PoE Switch JHA-P422024BHGW
Introduction
The JHA-P422024BHGW is a full gigabit unmanaged PoE fiber switch. It has 26*10/100/1000M adaptive RJ45 ports and 2*1000M SFP ports. Port 1-24 can support IEEE802.3af/at PoE standard. Single-port PoE power reaches 30W, and the max PoE output power is 400W (at-600W). As a PoE power supply device, it can automatically detect and recognize the power receiving equipment that meets the standard and supply power through the network cable. It can supply power to POE terminal equipment such as wireless AP, webcam, VoIP phone, building visual access control intercom, etc. through network cable, to meet the network environment that needs high-density PoE power supply. It is suitable for hotel, campus, factory dormitory and small and medium-sized enterprise. Unmanaged model, plug and play, no configuration, easy to use.
Feature
◇ Full gigabit access
* Support non-blocking wire-speed forwarding.
* Support full-duplex based on IEEE802.3x and half-duplex based on Backpressure.
* Support gigabit Ethernet port and gigabit SFP fiber port combination, which enables users to flexibly build networking to meet the needs of various scenarios.
◇ Intelligent PoE power supply
* IEEE802.3af/at PoE standard, without damaging non-PoE devices.
* Priority system for PoE port, it will supply power to the high priority level port first when the power budget is insufficient and avoid overwork of the device.
* 24*10/100/1000Base-T RJ45 ports can support POE power to meet the needs of security monitoring, teleconferencing system, wireless coverage, and other scenarios.
◇ Stable and reliable
* CCC, CE, FCC, RoHS.
* The user-friendly panel can show the device status through the LED indicator of PWR, Link, PoE.
* Self-developed power supply, high redundancy design, providing a long term and stable PoE power output.
* Low power consumption, galvanized steel shell, with fan super heat dissipation to ensure stable operation of the product.
Specification
Model |
JHA-P422024BHGW |
JHA-P422024BTHGW |
Interface Characteristics |
||
Fixed Port |
24*10/100/1000Base-T PoE ports (Data /Power) 2*10/100/1000Base-T uplink RJ45 ports (Data) 2*1000Base-X uplink SFP slot ports (Data) |
|
Ethernet Port |
Port 1-24 can support 10/100/1000Base-T auto-sensing, full/half duplex MDI/MDI-X |
|
Twisted Pair Transmission |
10BASE-T: Cat3,4,5 UTP(≤100 meters) 100BASE-TX: Cat5 or later UTP(≤100 meters) 1000BASE-T: Cat5e or later UTP(≤100 meters) |
|
SFP Slot Port |
Gigabit SFP optical fiber port, default no include optical modules (optional order single-mode/ multi-mode, single fiber / dual fiber optical module. LC) |
|
Optical Cable |
Multi-mode:850nm/ 0-500M, Single-mode:1310nm/ 0-40KM, 1550nm/ 0-120KM. |
|
Chip Parameter |
||
Network Protocol |
IEEE802.3 10BASE-T, IEEE802.3i 10Base-T, IEEE802.3u 100Base-TX IEEE802.3ab 1000Base-T, IEEE802.3z 1000Base-X, IEEE802.3x |
|
Forwarding Mode |
Store and Forward(Full Wire Speed) |
|
Switching Capacity |
56Gbps (Non-blocking) |
|
Forwarding Rate@64byte |
41.66Mpps |
|
MAC |
8K |
|
Buffer Memory |
4M |
|
Jumbo Frame |
9.6K |
|
LED Indicator |
Power: PWR (Green), Network: Link, Link/Act (Yellow), PoE: PoE (Green), Fiber port: L/A (Green) |
|
Reset Switch |
Yes, One-button factory reset |
|
PoE & Power Supply |
||
PoE Port |
Port 1 to 24 |
|
Power Supply Pin |
1/2 (+) 3/6 (-) |
|
Max Power Per Port |
30W, IEEE802.3af/at |
|
Total PWR / Input Voltage |
400W (AC100-240V) |
600W (AC100-240V) |
Power Consumption |
Standby<22W, Full Load<400W |
Standby<25W, Full Load<600W |
Power Supply |
Built-in power supply AC100-240V 50-60Hz 5.0A |
Built-in power supply AC100-240V 50-60Hz 6.6A |
Physical Parameter |
||
Operation TEMP / Humidity |
-20~+55°C, 5%~90% RH Non condensing |
|
Storage TEMP / Humidity |
-40~+75°C, 5%~95% RH Non condensing |
|
Dimension (L*W*H) |
440*290*44.5mm |
|
Net /Gross Weight |
<3.8kg /<4.3kg |
<4.5kg /<5.0kg |
Installation |
Desktop, wall-mount, 19″ 1U rack-mount |
|
Certification & Warranty |
||
Lightning Protection |
Lightning protection: 4KV 8/20us, Protection level: IP30 |
|
Certification |
CCC, CE mark, commercial, CE/LVD EN62368-1, FCC Part 15 Class B, RoHS |
|
Warranty |
3 years |
Dimension
Order Information
Model |
Description |
Built-in Power Supply |
JHA-P422024BHGW |
Unmanaged PoE fiber switch with 26*10/100/1000M RJ45 ports and 2*1000M uplink SFP ports. Port 1-24 can support IEEE802.3af/at PoE standard. Support 19″ 1U rack-mount installation. |
400W |
JHA-P422024BTHGW |
600W |
|
Note: The SFP optical module is not included by default and needs to be purchased separately. |