2019 wholesale price Low Price Sfp Aoc - 100-4*25G Active optical cabel (QSFP28-4*SFP28) JHA-QSFP28-4SFP28-100G-AOC – JHA
2019 wholesale price Low Price Sfp Aoc - 100-4*25G Active optical cabel (QSFP28-4*SFP28) JHA-QSFP28-4SFP28-100G-AOC – JHA Detail:
Features
◊ Support 4x25GBASE-SR application
◊ Compliant to QSFP28 MSA SFF-8636 and SFP28 MSA SFF-8431 and SFF- 8472
◊ Multi rate of up to 25.78125Gbps per lane
◊ Transmission distance up to 50m
◊ +3.3V single power supply
◊ Low power consumption
◊ UL certification cables (optional)
◊ Operating temp Commercial: 0°C to +70 °C
◊ RoHS compliant
Applications
◊ 4x25Gbe-SR
◊ Other optical links
Specification:
Absolute Maximum Ratings
Table1- Absolute Maximum Ratings
Parameter |
Symbol |
Min. |
Typical |
Max. |
Unit |
Notes |
Supply Voltage |
Vcc3 |
-0.5 |
- |
+3.6 |
V |
|
Storage Temperature |
Ts |
-10 |
- |
+70 |
°C |
|
Operating Humidity |
RH |
+5 |
- |
+85 |
% |
1 |
Note: 1 No condensation
Recommended Operating Conditions
Table 2- Recommended operating Conditions
Parameter | Symbol | Min. | Typical |
Max. |
Unit | Notes |
Operating Temperature | TC | 0 | - |
+70 |
°C | |
Power Supply Voltage | Vcc | 3.14 | 3.3 |
3.47 |
V | |
Power Dissipation per QSFP28 | Pd | - | - |
2.5 |
W | |
Power Dissipation per SFP28 | Pd | - | - |
1.0 |
W | 1 |
Bit Rate per Lane | BR | 10.3125 | 25.78125 | - | Gbps |
Note: 1 Per terminal
Electrical Characteristics
Table 3- Electrical Characteristics for QSFP28
Parameter | Symbol | Min. | Typ. | Max. | Units | Notes | |
ModSelL | Module Select | VOL | 0 | - | 0.8 | V | |
Module Unselect | VOH | 2.5 | - | VCC | V | ||
LPMode | Low Power Mode | VIL | 0 | - | 0.8 | V | |
Normal Operation | VIH | 2.5 | - | VCC+0.3 | V | ||
ResetL | Reset | VIL | 0 | - | 0.8 | V | |
Normal Operation | VIH | 2.5 | - | VCC+0.3 | V | ||
ModPrsL | Normal Operation | VOL | 0 | - | 0.4 | V | |
IntL | Interrupt | VOL | 0 | - | 0.4 | V | |
Normal Operation | VoH | 2.4 | - | VCC | V | ||
Electrical Transmitter Characteristics | |||||||
Differential Date Input Swing | Vin,P-P | 200 | - | 1600 | mV | ||
Output Differential Impedance | ZIN | 90 | 100 | 110 | Ω | ||
Electrical Receiver Characteristics | |||||||
Differential Data Output Swing | Vout | 200 | - | 800 | mVPP | ||
Bit Error Rate | BER | E-12 | 1 | ||||
Input Differential Impedance | ZD | 90 | 100 | 110 | Ω |
Note: 1 PRBS2^31-1@25.78125Gbps
Table 4- Electrical Characteristics for SFP28
Parameter | Symbol | Min. | Typ. |
Max. |
Units | Notes | ||||
Electrical Transmitter Characteristics | ||||||||||
Differential Data Input Swing | Vin,P-P | 200 | - | 1600 | mVPP | |||||
Input Differential Impedance | ZIN | 90 | 100 | 110 | Ω | |||||
Tx_Fault | Normal Operation | VOL | 0 | - | 0.8 | V | ||||
Transmitter Fault | VOH | 2.0 | - | VCC | V | |||||
Tx_Disable | Normal Operation | VIL | 0 | - | 0.8 | V | ||||
Laser Disable | VIH | 2.0 | - | VCC+0.3 | V | |||||
Electrical Receiver Characteristics | ||||||||||
Differential Date Output | Vout | 400 | - |
800 |
mV | |||||
Bit Error Rate | BER | - | - |
E-12 |
- | |||||
Output Differential Impedance | ZD | 90 | 100 |
110 |
Ω | |||||
Rx_LOS | Normal Operation | VOL | 0 | - |
0.8 |
V | ||||
Lose Signal | VoH | 2.0 | - |
VCC |
V |
Pin arrangement
Figure 1, Pin View for QSFP28
Table 5- Pin Function Definitions for QSFP28
Pin | Symbol | Name/Description | Notes |
1 | GND | Ground | 1 |
2 | Tx2n | Transmitter Inverted Data Input | |
3 | Tx2p | Transmitter Non-Inverted Data Input | |
4 | GND | Ground | 1 |
5 | Tx4n | Transmitter Inverted Data Input | |
6 | Tx4p | Transmitter Non-Inverted Data Input | |
7 | GND | Ground | 1 |
8 | ModSelL | Module Select | |
9 | ResetL | Module Reset | |
10 | Vcc Rx | +3.3V Power Supply Receiver | |
11 | SCL | 2-wire serial interface clock | |
12 | SDA | 2-wire serial interface data | |
13 | GND | Ground | 1 |
14 | Rx3p | Receiver Non-Inverted Data Output | |
15 | Rx3n | Receiver Inverted Data Output | |
16 | GND | Ground | 1 |
17 | Rx1p | Receiver Non-Inverted Data Output | |
18 | Rx1n | Receiver Inverted Data Output | |
19 | GND | Ground | 1 |
20 | GND | Ground | 1 |
21 | Rx2n | Receiver Inverted Data Output | |
22 | Rx2p | Receiver Non-Inverted Data Output | |
23 | GND | Ground | 1 |
24 | Rx4n | Receiver Inverted Data Output |
Pin |
Symbol |
Name/Description | Notes |
25 | Rx4p | Receiver Non-Inverted Data Output | |
26 | GND | Ground | 1 |
27 |
ModPrsL |
Module Present | |
28 | IntL | Interrupt | |
29 | Vcc Tx | +3.3V Power supply transmitter | |
30 | Vcc1 | +3.3V Power supply | |
31 |
LPMode |
Low Power Mode | |
32 | GND | Ground | 1 |
33 | Tx3p | Transmitter Non-Inverted Data Input | |
34 | Tx3n | Transmitter Inverted Data Input | |
35 | GND | Ground | 1 |
36 | Tx1p | Transmitter Non-Inverted Data Input | |
37 | Tx1n | Transmitter Inverted Data Input | |
38 | GND | Ground | 1 |
Note: 1. Circuit ground is internally isolated from chassis ground.
Figure 2, Pin View for SFP28
Table 6-Pin Function Definitions
Pin | Symbol | Name/Description | Notes |
1 | VEET | Module Transmitter Ground | 1 |
2 | TX_FAULT | Module Transmitter Fault | 2 |
3 | TX_DISABLE | Transmitter Disable; Turns off transmitter laser output | 3 |
4 | SDA | 2-Wire Serial Interface Data Line (MOD-DEF2) | |
5 | SCL | 2-Wire Serial Interface Clock (MOD-DEF1) | |
6 | MOD_ABS | Module Absent, connected to VEET or VEER in the module | 2 |
7 | RS0 | Rate Select 0, optionally controls SFP+ module receiver | 4 |
8 | RX_LOS | Receiver Loss of Signal Indication (In FC designated as Rx_LOS and in Ethernet designated as NOT Signal Detect) | 2 |
9 | RS1 | Rate Select 1, optionally controls SFP+ module transmitter | 4 |
Pin | Symbol | Name/Description | Notes |
10 | VEER | Module Receiver Ground | 1 |
11 | VEER | Module Receiver Ground | 1 |
12 | RD- | Receiver Inverted Data Output | |
13 | RD+ | Receiver Non-Inverted Data Output | |
14 | VEER | Module Receiver Ground | 1 |
15 | VCCR | Module Receiver 3.3 V Supply | |
16 | VCCT | Module Transmitter 3.3 V Supply | |
17 | VEET | Module Transmitter Ground | 1 |
18 | TD+ | Transmitter Non-Inverted Data Input | |
19 | TD- | Transmitter Inverted Data Input | |
20 | VEET | Module Transmitter Ground | 1 |
Note:
- The module ground pins are isolated from the module case.
- The pins shall be pulled up with 4.7K-10Kohms to a voltage between 3.14V and 3.46V on host board.
- The pin is pulled up to VCCT with a 4.7K-10KΩ resistor in the module.
- See SFF-8472 Rev12.2 Table 10-2.
Recommended Circuit
Figure 3, Recommended Interface Circuit for QSFP28
Figure 4, Recommended Host Board Power Supply Circuit for SFP28
Figure 5, Recommended Interface Circuit for SFP28
Monitoring Specification
Figure 6, Memory Map for QSFP28
Figure 7, Memory Map for SFP28
Mechanical
Unit mm
Figure 8, Mechanical Diagram
Table 7- Cable Length
Cable Length L1(Unit: m) | Tolerant(Unit: cm) |
≤1.0 | +5/-0 |
1.0<L≤4.5 | +15/-0 |
4.5<L≤14.5 | +30/-0 |
>14.5 | +2%/-0 |
Table 8- Breakout Cable Nominal Length
Total Length L1 (Unit: m) |
Breakout Point Measured from SFPL2(Unit: m) |
1 | 0.7 |
2 | 1.4 |
3 | 2 |
≥5 | 3 |
Warnings
Handling Precautions: This device is susceptible to damage as a result of electrostatic discharge (ESD).
A static free environment is highly recommended. Follow guidelines according to proper ESD procedures.
Laser Safety: Radiation emitted by laser devices can be dangerous to human eyes. Avoid eye exposure to direct or indirect radiation.
Product detail pictures:
Related Product Guide:
Our business puts emphasis over the administration, the introduction of talented staff, plus the construction of team building, attempting hard to boost the standard and liability consciousness of personnel customers. Our corporation successfully attained IS9001 Certification and European CE Certification of 2019 wholesale price Low Price Sfp Aoc - 100-4*25G Active optical cabel (QSFP28-4*SFP28) JHA-QSFP28-4SFP28-100G-AOC – JHA , The product will supply to all over the world, such as: Egypt, Rome, Lebanon, As a way to make use of the resource on the expanding information and facts in international trade, we welcome prospects from everywhere on the web and offline. In spite in the high quality products and solutions we supply, effective and satisfying consultation service is supplied by our professional after-sale service group. Solution lists and thorough parameters and any other info weil be sent for you timely for the inquiries. So make sure you get in touch with us by sending us emails or contact us if you have any concerns about our firm. ou can also get our address info from our web site and come to our enterprise. or a field survey of our solutions. We're confident that we have been going to share mutual results and build solid co-operation relations with our companions in this market. We're looking forward to your inquiries.
By Elizabeth from Barcelona - 2017.11.29 11:09
Company director has very rich management experience and strict attitude, sales staff are warm and cheerful, technical staff are professional and responsible,so we have no worry about product,a nice manufacturer.
By Carol from Mongolia - 2017.02.14 13:19