10/100TX – 100FX | Single Fiber Media Converter JHA-F11W
Introduction
JHA-F11W series is a single fiber media converter complies with IEEE802.3 standards, It is designed to convert data signal between 100Base-FX and 10/100Base-T(X) fast Ethernet.
The media converter is connected between fiber cable and twisted cable, extend your Ethernet network beyond the 100-meter limit imposed by copper cable.
This converter model can be used as slide-in module to the 14-slot 19″ Rack-Mount Chassis.
Converter is transparent to all protocols, can be used all all areas as Fiber to The Home, Fiber to the Business or Fiber to The Curb.
Features
• Compliance with IEEE 802.3, IEEE 802.3u, IEEE 802.3X, IEEE 802.1Q, 10Base-TX, 100Base-TX, 100Base-FX standards.
• It supports TCP / IP, PPPOE, DHCP, ICMP, NAT protocol.
• Flow control: Full duplex using IEEE 802.3X, a standard half-duplex adopt Backpressure.
• Electrical ports support auto-negotiation function, automatically adjusts the transmission and transfer rates.
• Ports support Auto-MDI / MDIX auto-flip.
• Support store and forward mode.
• Supports 10M, 100M mode or adaptive mode.
• Provide status indicators, external power supply (output 5V ~ 50HZ 1A).
• The card design, to facilitate future maintenance and inspection equipment.
• Modular power supply design, function board with separate power supply design, easy to post-maintenance.
• Unique IC solutions, the chip temperature low, to get rid of plus cooling system, flow control and reduce broadcast storms.
• High-quality integrated photovoltaic module provides good optical properties and electrical properties to ensure reliable transmission, long life.
• Operating Mechanism broadcast filtering, address auto-learning and auto-update feature and store and forward.
• It supports up to 1916 byte long data packet transmission.
• Missing link to provide remote diagnostics, electrical interface and optical port link link connection diagnostics, dynamic data transmission, full-duplex / half duplex, speed light, easy installation and later maintenance.
• Ultra-low power consumption of less than 2.5W (Input: AC140 ~ 260V), low heat, stable operation for a long time.
Dimension
Specification
|
Protocol Standard |
IEEE802.3, IEEE802.3u, IEEE802.3x Flow control, IEEE802.1q, IEEE802.1p QoS, IEEE802.1d Spanning Tree |
|
Wavelength |
1310nm/1550nm |
|
Transmission Distance |
Cat5 100mSingle Mode, Single-fiber 20/40/60/80/100Km |
|
Ethernet Port |
RJ45 Ports, Connection STP / UTP Cat5/Cat5e Cooper Cable |
|
Fiber Port |
Single Mode, Single Fiber, SC/ST/FC (Diameter 9/125μm ) |
|
Exchange Attribute |
Conversion Method: Media conversion, store and forward / straight inMAC Add: 1 K
Cache: 1 Mbit Full duplex state: flow control, half-duplex: backpressure mode Store and Forward: 9.6us, Straight In: 0.9us BER: <1/1000000000 |
|
LED Indicator |
PWR( Power Supply )FX LINK/ACT
FDX ( Ethernet port full / half duplex mode ) TX LINK/ACT ( Ethernet port communication / action ) 100 ( 100/10M transmission rate ) FX ( Optical signal ) |
|
Power Supply |
Power Input: DC5V1AFull Load: <2.5 W |
|
Working Environment |
Operating Temperature: -20~70℃Storage Temperature: -40~70℃
Storage Humidity: 5% to 90% non-condensing |
|
Dimension |
94*71*26mm ( L * W * H ) |
|
Certification |
CE, FCC, RoHS |
|
Warranty |
3-years |
Order Information
|
Model No. |
Description of Goods |
|
JHA-F11W-20 |
10/100M Single-mode, Single Fiber, 20Km, SC/ST/FC Connector |
|
JHA-F11W-40 |
10/100M Single-mode, Single Fiber, 40Km, SC/ST/FC Connector |
|
JHA-F11W-60 |
10/100M Single-mode, Single Fiber, 60Km, SC/ST/FC Connector |
|
JHA-F11W-80 |
10/100M Single-mode, Single Fiber, 80Km, SC/ST/FC Connector |
|
JHA-F11W-100 |
10/100M Single-mode, Single Fiber, 100Km, SC/ST/FC Connector |
|
JHA-F11W-120 |
10/100M Single-mode, Single Fiber, 120Km, SC/ST/FC Connector |
