100% Original Hdmi 2.1 Cable - 10G SFP+ Active Optical cable JHA-SFP-10G-AOC – JHA
100% Original Hdmi 2.1 Cable - 10G SFP+ Active Optical cable JHA-SFP-10G-AOC – JHA Detail:
Features
◊ Support 10GBASE-SR/10G Fiber Channel application
◊ Compliant to SFP+ Electrical MSA SFF-8431
◊ Compliant to SFP+ Mechanical MSA SFF-8432
◊ Multi rate of up to 11.3Gbps
◊ Transmission distance up to 300m
◊ +3.3V single power supply
◊ Low power consumption
◊ Operating case temp Commercial: 0°C to +70 °C
◊ RoHS compliant
◊ Password protection for A0h and A2h
Applications
◊ 10GBASE-SR at 10.31Gbps
◊ InfiniBand QDR, SDR, DDR
◊ Other optical links
Specification:
Absolute Maximum Ratings
Table1- Absolute Maximum Ratings
Parameter | Symbol |
Min. |
Typical | Max. | Unit | Notes |
Supply Voltage | Vcc3 |
-0.5 |
- | +3.6 | V | |
Storage Temperature | Ts |
-10 |
- | +70 | °C | |
Operating Humidity | RH |
+5 |
- | +85 | % | 1 |
Receiver Damage Threshold | P Rdmg |
+3.4 |
- | - | dBm |
Note1: No condensation
Recommended Operating Conditions
Table 2- Recommended operating Conditions
Parameter | Symbol | Min. | Typical |
Max. |
Unit | Notes |
Operating Case Temperature | TC | 0 | - |
+70 |
°C | |
Power Supply Voltage | Vcc | 3.14 | 3.3 |
3.47 |
V | |
Power Supply Current | Icc | - | - |
150 |
mA | |
Power Dissipation | Pd | - | - |
0.6 |
W | |
Bit Rate | BR | - | 10.3125 | - | Gbps | |
Fiber Bend Radius | Rb | 3 | - | - | cm |
Electrical Characteristics
Table 3- Electrical Characteristics
Parameter | Symbol | Min. | Typ. |
Max. |
Units | Notes | |
Transmitter |
|||||||
Differential Data Input Swing | Vin,P-P | 200 | - | 1600 | mVPP | ||
Input Differential Impedance | ZIN | 90 | 100 | 110 | Ω | ||
Tx_Fault | Normal Operation | VOL | 0 | - | 0.8 | V | |
Transmitter Fault | VOH | 2.0 | - | VCC | V | ||
Tx_Disable | Normal Operation | VIL | 0 | - | 0.8 | V | |
Laser Disable | VIH | 2.0 | - | VCC+0.3 | V | ||
Receiver | |||||||
Differential Date Output | Vout | 370 | - |
1600 |
mV | ||
Output Differential Impedance | ZD | 90 | 100 |
110 |
Ω | ||
Rx_LOS | Normal Operation | VOL | 0 | - |
0.8 |
V | |
Lose Signal | VoH | 2.0 | - |
VCC |
V |
Optical Characteristics
Table 4-Optical Characteristics
Parameter | Symbol |
Unit |
Min | Typ | Max | Notes |
Optical transmitter Characteristics | ||||||
Data Rate | DR |
Gbps |
9.953 | 10.3125 | 11.3 | |
Center Wavelength Range | λc |
nm |
820 | 850 | 880 | |
Laser Off Power | Poff |
dBm |
- | - | -45 | |
Launch Optical Power | P0 |
dBm |
-6.0 |
- |
- |
1 |
Extinction Ratio | ER | dB | 3 |
- |
- |
|
Spectral Width(RMS) | RMS |
nm |
- |
- |
0.45 |
|
Optical Receiver Characteristics | ||||||
Data Rate | DR |
Gbps |
9.953 | 10.3125 | 11.3 | |
Bit Error Rate | BER |
dBm |
- | - | E-12 | 2 |
Overload Input Optical | PIN |
dBm |
2.4 | - | - | 2 |
Power | ||||||
Center Wavelength Range | λc |
nm |
820 |
- |
880 | |
Receiver Sensitivity inAverage Power |
Sen |
dBm |
- |
- |
-9.9 | 3 |
Los Assert |
LosA |
dBm |
-26 |
- |
- | |
Los De-Assert |
LosD |
dBm |
- |
- |
-12 | |
Los Hysteresis |
LosH |
dB | 0.5 |
- |
- |
Note:
- Coupled into 50/125 MMF.
- Measured with PRBS 231-1 test pattern @10.3125Gbps.BER=10E-12
Recommended Host Board Power Supply Circuit
Figure 1, Recommended Host Board Power Supply Circuit
Recommended Interface Circuit
Figure 2, Recommended Interface Circuit
Pin arrangement
Figure 3, Pin View
Table 5-Pin Function
Definitions
Pin | Symbol | Name/Description | Notes |
1 | VEET | Module Transmitter Ground | 1 |
2 | TX_FAULT | Module Transmitter Fault | 2 |
3 | TX_DISABLE | Transmitter Disable; Turns off transmitter laser output | 3 |
4 | SDA | 2-Wire Serial Interface Data Line (MOD-DEF2) | |
5 | SCL | 2-Wire Serial Interface Clock (MOD-DEF1) | |
6 | MOD_ABS | Module Absent, connected to VEET or VEER in the module | 2 |
7 | RS0 | Rate Select 0, optionally controls SFP+ module receiver | |
8 | RX_LOS | Receiver Loss of Signal Indication (In FC designated as Rx_LOS and in Ethernet designated as NOT Signal Detect) | 2 |
9 | RS1 | Rate Select 1, optionally controls SFP+ module transmitter | |
10 | VEER | Module Receiver Ground | 1 |
11 | VEER | Module Receiver Ground | 1 |
12 | RD- | Receiver Inverted Data Output | |
13 | RD+ | Receiver Non-Inverted Data Output | |
14 | VEER | Module Receiver Ground | 1 |
15 | VCCR | Module Receiver 3.3 V Supply | |
16 | VCCT | Module Transmitter 3.3 V Supply | |
17 | VEET | Module Transmitter Ground | 1 |
18 | TD+ | Transmitter Non-Inverted Data Input | |
19 | TD- | Transmitter Inverted Data Input | |
20 | VEET | Module Transmitter Ground | 1 |
Note:
- The module ground pins are isolated from the module case.
- The pins shall be pulled up with 4.7K-10Kohms to a voltage between 3.14V and 3.46V on host board.
- The pin is pulled up to VCCT with a 4.7K-10KΩ resistor in the module.
Monitoring Specification
Figure 4, Memory Map
Mechanical Design Diagram
Unit:mm
Table 6- Cable
Length
Cable Length L(Unit: m) | Tolerant(Unit: cm) |
≤1.0 | +5/-0 |
1.0<L≤4.5 | +15/-0 |
4.5<L≤14.5 | +30/-0 |
>14.5 | +2%/-0 |
Warnings
Handling Precautions: This device is susceptible to damage as a result of electrostatic discharge (ESD).A static free environment is highly recommended. Follow guidelines according to proper ESD procedures.
Laser Safety: Radiation emitted by laser devices can be dangerous to human eyes. Avoid eye exposure to direct or indirect radiation.
Product detail pictures:
![100% Original Hdmi 2.1 Cable - 10G SFP+ Active Optical cable JHA-SFP-10G-AOC – JHA detail pictures](https://jha-tech.goodao.net/uploads/abe216e7.jpg)
![100% Original Hdmi 2.1 Cable - 10G SFP+ Active Optical cable JHA-SFP-10G-AOC – JHA detail pictures](https://jha-tech.goodao.net/uploads/8fef203f.jpg)
![100% Original Hdmi 2.1 Cable - 10G SFP+ Active Optical cable JHA-SFP-10G-AOC – JHA detail pictures](https://jha-tech.goodao.net/uploads/6bea6dc4.jpg)
Related Product Guide:
We retain improving upon and perfecting our items and repair. At the same time, we perform actively to do research and progress for 100% Original Hdmi 2.1 Cable - 10G SFP+ Active Optical cable JHA-SFP-10G-AOC – JHA , The product will supply to all over the world, such as: Mauritius, Leicester, Macedonia, With good quality, reasonable price and sincere service, we enjoy a good reputation. Products are exported to South America, Australia, Southeast Asia and so on. Warmly welcome customers at home and abroad to cooperate with us for the brilliant future.
![5 Stars](https://jha-tech.goodao.net/admin/img/star-icon.png)
We are long-term partners, there is no disappointment every time, we hope to maintain this friendship later!
![5 Stars](https://jha-tech.goodao.net/admin/img/star-icon.png)