10.2Gbps 1×8 HDMI Splitter with EDID Management JHA-DHSP8
Introduction
This high performance 10.2Gbps 8 HDMI Splitter can split one HDMI input to eight HDMI outputs simultaneously. Supported input/output video resolution is up to 4Kx2K@50/60Hz YCbCr 4:2:0. HDR and Dolby Vision function are available. In addition, this splitter supports four modes EDID setting.
Features
☆ HDCP1.4 compliant
☆ Support video bandwidth 10.2 Gbps
☆ Video resolution is up to 4K，2K@50/60Hz YCbCr 4:2:0
☆ Support 3D, HDR, Dolby Vision function
☆ EDID can be selected with four modes by dial switch on panel, including 1080P@60Hz-2ch, 4K@30Hz-2ch, copy HDMI OUT 1 and compare all outputs.
☆ No need to install the driver, plug and play
Specification
| Technical | |||
| HDCP Compliance |
HDCP 1.4 |
||
| Video Bandwidth |
10.2Gbps |
||
| Video Resolution |
4K2K 50/60Hz 4:2:0 4K2K 30Hz 4:4:4 1080p, 1080i, 720p, 720i, 480p, 480i All HDMI 3D TV formats All PC resolutions including 1920 x 1200 |
||
| 3D Support | Yes | ||
| Color Space | RGB, YCbCr 4:4:4, YCbCr 4:2:2, YCbCr 4:2:0 | ||
| Color Depth | 8/10/12-bit | ||
| HDMI Audio Formats |
PCM2.0/5.1/7.1CH, Dolby Digital/Plus/EX, Dolby True HD, DTS, DTS-EX,DTS-96/24, DTS High Res, DTS-HD Master Audio, DSD |
||
| HDR Formats |
HDR10, HDR10+, Dolby Vision |
||
| ESD Protection | Human-body Model:±8kV (Air-gap discharge), ±4kV (Contact discharge) | ||
| Connection | |||
| Input Ports | 1′HDMI Type A [19-pin female] | ||
| Output Ports | 8′HDMI Type A [19-pin female] | ||
| Mechanical | |||
| Housing | Metal Enclosure | ||
| Color | Black | ||
| Dimensions | 251mm(W)x60mm(D)x30mm(H) | ||
| Weight | 350g | ||
| Power Supply | Input: AC 100~240V 50/60HzOutput: DC 5V/1A | ||
| Power Consumption | 1W (max) | ||
| Operating Temperature | 0°C ~ 40°C / 32°F ~ 104°F | ||
| Storage Temperature | -20°C ~ 60°C / -4°F ~ 140°F | ||
| Relative Humidity | 20~90% RH (non-condensing) | ||
| Resolution / Cable Length |
4K60 (YCbCr 4:2:0)- Feet / Meters |
1080P60 - Feet / Meters |
|
| HDMI IN / OUT |
32ft / 10M |
50ft / 15M |
|
| The use of “Premium High Speed HDMI” cable is highly recommended. | |||
Operation Controls and Functions
Front Panel
|
Name |
Function Description |
|
Power Switch |
Turn on / off power supply for the Splitter. |
|
Power LED |
When the Splitter is connected to power supply and the power switch is turned on, red LED illuminates. |
|
EDID |
0 means OFF, 1 means ON. 00: All HDMI OUT ports output default 1080P@60Hz-2ch. 01: All HDMI OUT ports output default 4K@30Hz-2ch. 10: Copy HDMI OUT 1 port EDID setting to all outputs. If no HDMI OUT 1 capable EDID is detected then the unit will output default 1080P@60Hz-2ch. 11: Compare all HDMI OUT ports EDID then outputs the best EDID to all output ports. |
Rear Panel
| Name | Function Description |
| HDMI OUT1~8 LED | Green LED indicates that the HDMI OUT ports are connected to active display devices. |
| HDMI OUT1~8 | HDMI outputs for display 1 to 8. |
| HDMI IN LED | Green LED indicates that the HDMI IN port is connected to an active source device. |
| HDMI IN | HDMI source input. |
| DC 12V | DC 12V input for 12V 1A power adapter. |
